5/8/26, 10:16 AM

01 14 25_G01 G05 G20 G30 XB1 G H EVAP SYSTEM PURGE (VENT) VALVE EXT LTD WTY (ELW) 15/150

SIB 01 14 25
G01 G05 G20 G30 XB1 G H EVAP SYSTEM PURGE (VENT) VALVE EXT LTD WTY (ELW) 15/150
2026-05-07
☐

THIS REPAIR IS MOBILE FRIENDLY

This Service Information bulletin (Revision 01) supersedes SI B01 14 25 dated September 2025
What’s New:
SIB titled changed
2020 and newer model year vehicles added as identified

MODEL
E-Series
G01
G05
G20
G30

Model Year
2020 to 2023
2021 to 2023
2021 to 2024
2018 to 2023

Model Description
X3 xDrive30e
X5 xDrive45e
330e Sedan, 330e xDrive Sedan
530e Sedan, 530e xDrive Sedan

Engine
XB1G
XB1
XB1G
XB1H, XB1G

Note: The information above is for informational purposes only, it is not the only deciding factor.
Eligible Vehicles
To assist you in identifying those vehicles that have this component-specific extended limited warranty (ELW)
coverage, the following Vehicle Comment will show in the VIN-specific Warranty Vehicle Inquiry (WVI).
Eligible Model Vehicles up to and including Model Year 2019
SI B01 14 25 (RC 13 90 90 03 00): For this vehicle, the EVAP systems purge (vent) valve
limited warranty for defects in materials and / or workmanship has been extended to 15
years / 150,000 miles as determined from the original first in-service / delivery date. This
coverage is subject to the same vehicle eligibility requirements, limitations, and exclusion
criteria that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trunks.
Eligible 2020 and Newer Model Year Vehicles as identified with the May 2026 SIB Update
SI B01 14 25 (RC 13 90 90 03 00): For this vehicle, the EVAP systems purge (vent) valve
limited warranty for defects in materials and / or workmanship has been extended to 15
years / 150,000 miles as determined from the original first in-service / delivery date. This
coverage is subject to the same vehicle eligibility requirements, limitations, and exclusion
criteria that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trunks.
Note: Before performing a repair and submitting a claim, first confirm that the vehicle has the above Notice of
Extended Limited Warranty coverage in the WVI “Vehicle Comments” section.
If you have ELW eligibility and/or coverage questions, please contact the Warranty department through IDS by
selecting Coverage, Policy, Coding Questions and Mileage Corrections prior to performing any repair.

SITUATION
© 2026 BMW OF NORTH AMERICA, LLC. ALL RIGHTS RESERVED
about:blank

1/2

5/8/26, 10:16 AM

01 14 25_G01 G05 G20 G30 XB1 G H EVAP SYSTEM PURGE (VENT) VALVE EXT LTD WTY (ELW) 15/150

Please see bulletin pdf in Supporting Materials.

Supporting Materials
picture_as_pdf B011425_AT_1 Cust Letter.pdf
picture_as_pdf B011425_AT_2 Cust Letter.pdf
picture_as_pdf B01 14 25 REV01_SR.pdf

© 2026 BMW OF NORTH AMERICA, LLC. ALL RIGHTS RESERVED
about:blank

2/2

Service Information Bulletin
Warranties

May 07, 2026
B01 14 25

G01 G05 G20 G30 XB1 G H EVAP SYSTEM PURGE (VENT) VALVE
EXT LTD WTY (ELW) 15/150
☐

THIS REPAIR IS MOBILE FRIENDLY

This Service Information bulletin (Revision 01) supersedes SI B01 14 25 dated September 2025
What’s New:
•
•

SIB titled changed
2020 and newer model year vehicles added as identified

MODEL
E-Series
G01
G05
G20
G30

Model Year
2020 to 2023
2021 to 2023
2021 to 2024
2018 to 2023

Model Description
X3 xDrive30e
X5 xDrive45e
330e Sedan, 330e xDrive Sedan
530e Sedan, 530e xDrive Sedan

Engine
XB1G
XB1
XB1G
XB1H, XB1G

Note: The information above is for informational purposes only, it is not the only deciding factor.
Eligible Vehicles
To assist you in identifying those vehicles that have this component-specific extended limited warranty
(ELW) coverage, the following Vehicle Comment will show in the VIN-specific Warranty Vehicle Inquiry
(WVI).
Eligible Model Vehicles up to and including Model Year 2019
SI B01 14 25 (RC 13 90 90 03 00): For this vehicle, the EVAP systems purge (vent) valve limited
warranty for defects in materials and / or workmanship has been extended to 15 years /
150,000 miles as determined from the original first in-service / delivery date. This coverage is
subject to the same vehicle eligibility requirements, limitations, and exclusion criteria that
apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trunks.
Eligible 2020 and Newer Model Year Vehicles as identified with the May 2026 SIB Update
SI B01 14 25 (RC 13 90 90 03 00): For this vehicle, the EVAP systems purge (vent) valve limited
warranty for defects in materials and / or workmanship has been extended to 15 years /
150,000 miles as determined from the original first in-service / delivery date. This coverage is
subject to the same vehicle eligibility requirements, limitations, and exclusion criteria that
apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trunks.
Note: Before performing a repair and submitting a claim, first confirm that the vehicle has the above
Notice of Extended Limited Warranty coverage in the WVI “Vehicle Comments” section.
If you have ELW eligibility and/or coverage questions, please contact the Warranty department
through IDS by selecting Coverage, Policy, Coding Questions and Mileage Corrections prior to
performing any repair.

SITUATION
Component-Specific Extended Limited Warranty (ELW)
For the eligible vehicles and for the issue
described below, BMW of North America, LLC
(BMW NA) is extending the limited warranty for
the vehicle’s Evaporative Emission Control
(EVAP) System’s Purge Valve to:
•

15 years/150,000 miles as determined by
the vehicle’s original first in-service /
delivery date.

This component-specific extended limited
warranty (ELW) applies to defects in materials or
workmanship.
This coverage applies to the vehicle, is transferable, and is subject to the same vehicle eligibility
requirements, limitations, and exclusion criteria that apply to the BMW New Vehicle Limited Warranty
for Passenger Cars and Light Trucks.
Note: This bulletin is notice of a limited warranty extension. This is NOT a notice of a Recall or
Service Action.
There is no immediate repair required unless the BMW vehicle is currently experiencing this problem.
Customer Notification Letter
Even though this is NOT a Recall, BMW NA is sending VIN-specific customer notification letters.

CAUSE
Over time, the EVAP system’s vent (purge) valve may develop material (micro leaks) and operational
issues, this can cause hard starting, and a rough running engine, especially at idling.
There could also be an audible metallic noise emanating internally from the purge valve.
Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the
Malfunction Indicator Lamp (MIL) will illuminate.
One or more of the following or similar fault codes may be entered in the DME fault memory:
•
•
•
•
•

118001 - mixture control: Mixture too lean,
118401 - mixture control: Mixture too lean, large deviation,
190F08 - fuel tank ventilation system: malfunction,
191C02 - fuel tank ventilation system, 2nd discharge point: malfunction, and/or
195014 - differential pressure sensor, tank vent valve, signal: stationary

CORRECTION
Follow the instructions in the PROCEDURE section.

PROCEDURE
If a vehicle listed above arrives at your center with the issue described in this Service Information
Bulletin, perform the corresponding diagnosis and when applicable, replace the EVAP system’s vent
(purge) valve as instructed or as determined by the diagnosis.

No other required EVAP system-related repairs are covered under this ELW coverage. When
applicable, invoice these items on the repair order separately, and review for other coverage that may
apply.

PARTS INFORMATION
To determine the part number that applies to the specific vehicle being repaired, enter the VIN/chassis
number into either ETK or AIR, this will consider the specific equipment and/or options that are fitted
to the vehicle.
Part Number
Refer to ETK/AIR

Description
Fuel tank breather valve

Quantity
1

Only order these parts in the quantities needed to address customers’ vehicles that have confirmed
failures.
Additionally, other materials and small parts that are not specified above, such as fluids, lubricants,
one-time use screws, nuts, and seals, which must be replaced or installed according to the ISTA
repair instructions/ETK, must be selected from the Electronic Parts Catalogue, or other approved
BMW resources, according to the respective vehicle type. Invoiced these items separately under the
Repair Code below.

CLAIM INFORMATION
For eligible US-specification BMW vehicles that are registered and operated in the United States
(including Puerto Rico), this component-specific 15 years (180 months)/150,000-mile extended limited
warranty coverage for defects in materials and/or workmanship applies to qualifying repairs performed
by authorized BMW centers.
This coverage applies to the vehicle, is transferable, and is subject to the same vehicle eligibility
requirements, limitations, and exclusion criteria that apply to the BMW New Vehicle Limited Warranty
for Passenger Cars and Light Trucks.
The existing limited warranty coverage for the whole vehicle and other components has not
changed.
This coverage supersedes the coverage that is provided under the BMW Certified Pre-Owned
Program or any BMW Group Vehicle Service Contract that applies to the vehicle.
For the issue described in this bulletin, the replacement vent (purge) valve is then covered by the
remaining portion of the extended limited warranty coverage period.
Non-Qualifying Repairs
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico, and/or the diagnosis and repair of other unrelated issues, or issues due to
outside influence are not covered by this extend limited warranty. This exclusion also applies to
repairs, including consequential, that were performed using non-genuine BMW parts and/or used
passenger car or light truck parts.
Qualifying Repairs – Claim Submission
Repair Code:

1390900300

G01 G05 G20 G30 XB1 XB1G XB1H US tank purge valve

Obtain the flat rate unit (FRU) allowances for the following that applies.
Labor Operation
00 00 006
Or:

Description
Carrying out vehicle test (Main work)

Labor Allowance
As applicable

00 00 556
And:
61 21 528
And, as needed:
61 00 006*
Or:
00 58 500*

Carrying out vehicle test (Plus work)

As applicable

Supporting voltage of the vehicle electrical system /
recharging vehicle battery

As applicable

Carrying out vehicle diagnosis, ABL (Work time)

WT FRU

Diagnosis Worktime Flat Rate

2 FRU

Description
Replace the tank vent valve

Labor Allowance
As applicable

And:
Labor Operation
13 90 500

Or, only when required with supporting documentation to diagnose the issue:
Activated Charcoal Filter Assembly which has an Integrated Leak Diagnosis Module (NVLD)
Configuration
Labor Operation

16 12 510

Description
Removing and installing or replacing carbon canister with
integrated diagnostic module for tank leaks for Natural
Vacuum Leak Detection (NVLD) (after vehicle diagnosis)
(To access for testing) (Replace when applicable.
This ELW coverage does not apply, invoice as a
separate RO line item. Claim submission eligibility is
based on another applicable coverage that may
apply)

Labor Allowance

Description
Special tool kit (B04 02 22 - PN 83 30 5 A39 389) for
NVLD/Purge Valve “micro leaks” diagnosis

Labor Allowance

As applicable

And:
Labor Operation
16 13 525

As applicable

And:
13 90 500

Replace the tank vent valve (To access the valve for
testing) (Replace when applicable, for an eligible
repair under this ELW coverage, invoice and claim as
outlined)

As applicable

If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556
instead of 00 00 006, or exclude (including 61 21 528) when the Vehicle Test is included in another
repair.
Work time labor operation codes 61 00 006 and 00 58 500 are not considered Main labor operations.
(*) Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the
applicable procedure for documenting, claiming, and explaining, on the RO and in the claim
comments, your diagnosis work time (WT), job/repair work time (WT), and the vehicle repairs your
center performed, unless otherwise required by State law.
BMW Group’s AIR Application Resource for Flat Rate Labor Operation Codes
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW Group AIR
application resource, start by entering the the Chassis Number (last seven (7) characters of the VIN),
and click on the “Search” icon. If two or more model vehicle choices show, select the applicable
Model, or enter the full VIN (17 characters) instead. Click on the “Flat Rate Units” button and enter a

flat rate labor operation code number in the field to the right, click on the “Search” icon to display the
corresponding listing of “Flat rate unit group details” that are available.
Previous Customer-Pay Repairs – Extended Limited Warranty Reimbursement
BMW of North America, LLC (BMW NA) will reimburse certain costs for qualifying customer-pay
repairs that were performed on eligible vehicles prior to the release of this component-specific
extended limited warranty.
A qualifying customer pay repair must primarily address this Service Information Bulletin’s
identified vehicle issue and repair. Also, the repair must have been correctly, adequately, and
completely performed as required by the applicable BMW Group approved standards, repair
procedure, processes, and policy instructions.
Eligible 2020 and newer model year vehicles as identified and added with the May 2026 SIB
update.
Customer-pay repairs are subject to the same vehicle eligibility requirements, limitations, and
exclusion criteria that apply to the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trucks.
Repairs that Do Not Qualify for Reimbursement
Repairs performed on ineligible vehicles, eligible vehicles operated and repaired outside the United
States and Puerto Rico, and/or the diagnosis and repair of other unrelated issues, or issues due to
outside influence are not covered by this extended limited warranty. This exclusion also applies to
repairs, including consequential, that were performed using non-genuine BMW parts and/or used
passenger car or light truck parts.
Requesting Reimbursement for a Previous Repair that Qualifies
For a customer to request reimbursement for a qualifying customer-pay repair performed either by an
authorized BMW center or independent repair shop located in the United States (including Puerto
Rico), please have him/her submit his/her reimbursement request online at www.BMW-RP.com
under the following reference:
•

BMW Purge Valve (ELW) 15YR.150MI

Reimbursement Request Procedure
The online process is initiated by attaching/sending PDF files of the supporting documentation for the
prior repair.
The letter also includes alternative methods to request reimbursement, either through the mail or by
fax as described below:
BMW Customer Reimbursement Center
Attention: BMW Purge Valve (ELW) 15YR.150MI
P.O. Box 54067
Hurst, Texas 76054
Fax number: 877-434-2992
Please allow 4-6 weeks for processing your request.
Should you have any questions concerning this reimbursement process, please call 1-844-857-0341.

FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback

To submit feedback for the technical topics of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the Warranty
Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS ticket
to the Parts Department

Attachment 1 to SI B01 14 25

BMW