NHTSA ID Number: 11032490
Manufacturer Communication Number: T-SB-0064-25 Rev1
TSB/Document Date: 2026-05-08
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: • Careful inspection for paint chips/scratches and body dents/dings. • Proper operation of electrical accessories (including interior light, clock, and radio reset). • Interior cleanliness. • Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. • GTS+ Health Check • Completed PDS Check Sheet • Battery Charge Test Print Out • GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance 0of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. This bulletin contains the PDS procedures that apply specifically to 2026 model year bZ vehicles
Relay Block
3
2
Remove the D/C Cut Fuse (30A) (Blank Space)
Install the D/C Cut Fuse (30A) (Original Location)
NOTE
• With the D/C Cut f use (30A) removed, if ANY DTCs are detected when the ignition is turned ON
during transportation, use GTS+ to clear ALL DTCs AFTER ensuring that there are NO malf unctions.
• While the vehicle is stored at the dealership, disconnect the negative (–) battery terminal to prevent
battery discharge. Ref er to T-SB-0005-26, Battery Inspection and Maintenance During PDS, f or
battery maintenance inf ormation.
© 2026 Toyota Motor Sales, USA
T-SB-0064-25
Rev1
September 4, 2025
Page 6 of 11
2026 bZ Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation
The front license plate bracket and two self-tapping screws are loaded in the vehicle at the
assembly plant. Follow this procedure to install the front license plate bracket and front license
plate in states where it is required by law.
1. Align holes “A” of the mounting bracket
with the dimples on the radiator lower grille
and mark the location of holes “B” on the
radiator lower grille.
Figure 2.
A
A
NOTE
• Holes “A” are used f or installation of the
mounting bracket to the radiator
lower grille.
• Holes “B” are used f or the installation of
the f ront license plate to the
mounting bracket.
B
2
1
3
A
Holes “A” for Mounting Bracket
B
Holes “B” for Front License Plate
1
Mounting Bracket
2
Mark and Drill Holes
3
Dimples
© 2026 Toyota Motor Sales, USA
T-SB-0064-25
Rev1
September 4, 2025
Page 7 of 11
2026 bZ Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation (continued)
2. Install the mounting bracket to the radiator
lower grille by attaching the two
self-tapping screws into the dimples.
Figure 3.
NOTICE
1
Do NOT overtighten the
self-tapping screws.
4
2
3
3. Install the front license plate to the
mounting bracket using two noncorroding
bolts with the following dimensions:
1
2
3
Front License Plate
4
Mounting Bracket
Figure 4.
Length: 15.0 mm (0.59 in.)
Diameter: 6.0 mm (0.24 in.)
2
1
1
Length
2
Diameter
© 2026 Toyota Motor Sales, USA
T-SB-0064-25
Rev1
September 4, 2025
Page 8 of 11
2026 bZ Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation
1. Remove the front and rear emergency
towing eyelets from the front and rear
bumpers by turning them counterclockwise.
Figure 5.
HINT
If it is dif f icult to loosen the emergency
towing eyelets, use a steel bar.
1
2
2. Place one of the removed emergency
towing eyelets into the luggage tray in the
luggage compartment.
1
Front Emergency Towing Eyelets
2
Rear Emergency Towing Eyelet
Figure 6.
NOTE
Dispose of the other removed emergency
towing eyelets.
1
1
© 2026 Toyota Motor Sales, USA
Emergency Towing Eyelet
T-SB-0064-25
Rev1
September 4, 2025
Page 9 of 11
2026 bZ Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)
3. Install the front and rear emergency towing
eyelet hole covers, which are stored in the
console box, onto the front and
rear bumpers.
Figure 7.
B
A. Insert the arrow-shaped part of the
emergency towing eyelet hole cover
“A” into the eyelet hole “B” as shown.
A
B. Install the emergency towing eyelet
hole cover to the hole of the bumper.
1
NOTE
Make sure the f ront emergency towing
eyelet cover is installed in the f ront, and
the rear emergency towing eyelet cover
is installed in the rear.
B
A
2
A
Arrow-shaped Part
B
Eyelet Hole
1
Front Emergency Towing Eyelet Hole Cover
2
Rear Emergency Towing Eyelet Hole Cover
© 2026 Toyota Motor Sales, USA
T-SB-0064-25
Rev1
September 4, 2025
Page 10 of 11
2026 bZ Pre-Delivery Service (PDS)
Power Back Door Initialization
As a result of the removal of the D/C Cut fuse with the back door open, the “automatic open and
close” function of the power back door will be inoperative due to loss of the back door position
memory stored in the ECU.
Refer to the applicable Repair Manual for the power back door initialization procedure.
•
2026 bZ:
Vehicle Exterior – Door / Hatch – Power Back Door System – Initialization
Tire Pressure Warning System (TPWS) Initialization
Refer to the applicable Repair Manual for the TPWS initialization procedure.
•
2026 bZ:
Suspension – Tire Pressure Monitoring – Tire Pressure Warning Receiver – Initialization
NOTE
• To adjust the tire pressure correctly when the outside temperature is signif icantly colder than shop
temperature, perf orm a Health Check using GTS+ and select the compensation tire pressure
checkbox. Compensation pressures will display on the Health Check res ults screen. Adjust the tire
pressure when the tires are cold.
• This model has f our TPWS sensors.
Seat Position Control ECU Initialization
Refer to the applicable Repair Manual for the seating position control ECU Initialization
procedure (procedure 2).
•
2026 bZ:
Vehicle Interior – Seat – Front Power Seat Control System (w/ Memory) – Registration
© 2026 Toyota Motor Sales, USA
T-SB-0064-25
Rev1
September 4, 2025
Page 11 of 11
2026 bZ Pre-Delivery Service (PDS)
Head Unit System Reset
Prior to vehicle delivery, please confirm that the welcome screen with language options appears
on the head unit display when ignition is switched to the ON position. There may be instances
where the welcome screen with language options may not properly appear on the head
unit display.
If the welcome screen showing language options is not displayed, complete the following steps:
1. Select the Settings option (gear icon).
2. Scroll down and select the Info & Security option.
3. The System Reset dialogue box will appear. Select Reset to confirm the resetting of
the system.
4. Confirm that the welcome screen with language options is now displayed.
Dealer Contact Information for Call Dealer Head Unit Function
Refer to the Multimedia System Owner’s Manual to add dealer contact information.
•
2026 bZ:
Section 2-9 Vehicle Settings – Setting Dealer Information
Navigation — Set Date & Time by GPS
Prior to vehicle delivery, it is necessary to turn the Set date & time by GPS setting to the
ON position.
1. Turn the engine switch (power switch) to the ON position (ON mode).
2. Navigate the following menus in the head unit: Settings – General – Date & Time –
Set Date & Time by GPS.
3. Ensure the Set date & time by GPS function is set to the ON position.
© 2026 Toyota Motor Sales, USA
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- Fast Starting Power: This 12V 70Ah 760 CCA delivers strong...
- Made to Last: With its 120-minute Reserve Capacity supports...
- All Power, No Mess AGM Design: Sealed and spill-proof, the...
- Strength That Starts on the Inside: The rugged construction...
- Tested Tough & Certified Safe: Mighty Max batteries are...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0064-25 Rev1
Replacement Service Bulletin Number:
MFR Communication Date: 2026-04-30
MFR Internal Campaign ID/Software Version: T-SB-0064-25 Rev1
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
Autoauth, OE-
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.