A Connection offline
Technical Service Bulletin Transaction No.: 2081007/2
91 Software update for MMI, OCU and gateway for MIB3 vehicles (version MQB .
ST3BP without AED) Release date: Apr 29, 2026
Condition
| Modes) | Years) VIN Range Vehicle Specific Equipment
Without PR Code 1U4
And with software:
4140
A3, $3, and RS 3 | 2024-2025 All 4142
4143
4318
4364
AED at SW 621
And with PR Code Ul4
And with software:
A3, S3, and RS 3 2025 035184 — 999999
4143
4318
4364
Without PR Codes IU4
And with software
4140
Q3 2024 — 2025 All 4142
4143
4318
4364
REVISION HISTORY
revton [onto [rumoee
2 | | Revised header (Adjusted PR filter.)
02/17/2026 | Initial publication
Customer states:

There may be problems with various MMI functions or “Emergency call fault” may be displayed in the instrument
cluster.
Workshop findings:
The vehicle still has one of the following software versions in diagnostic address 5F: 4140, 4142, 4143, 4318, 4364
Adifferent TSB may have instructed you to refer to this TSB in the context of a software update for multiple control
units.
Technical Background
Software issues.
Production Solution
The new software for the affected control units was implemented in production in model year 2026.
Service
Important information before updating the software
+ Diagnostic entries logged in diagnostic address 0075 will be repaired by a software update described in this
TSB. The Guided Fault Finding test plans should not be carried out and cannot be invoiced.
+ There will be extended inactive periods for some of the steps. You can work on a different vehicle during this
time. This is considered in the warranty accounting instructions.
Owen carrying out this TSB, time stamps are not required for billing under warranty.
+ Anewly developed test program is used to input the SVM code. Please ensure that the tester being used has
the latest ODIS update. The new test program for software updates is included in ODIS software.
+ Note: The vehicle uses acoustic signals and flashing lights to indicate when user input is required during and
at the end of the test program.
+ Important: Please prepare the required USB-C sticks (see parts information) before starting the repair. The
update media can be used for multiple vehicles.
+ This update package also includes new software for the MIB3 infotainment system. Useful information for
MIB3 software updates can be found in TSB 2060523, 91 MIB3: Software Update Instructions.
Repair procedure
1. Software update for emergency call module (0075), gateway (0019) and information electronics (005F),
Use the function “SVM - Authorized Multiple Code Entry” in “Flash” mode.
IMPORTANT: For the new software update program, the following SVM code must be entered exactly, including
commas and without spaces (recommendation: scan QR code with hand-held scanner or copy and paste the
SVM code chain).
The following is valid for A3 vehicle models:
ZGDOIP,CL3BPA001US,TGU1MDMVB,CL3BPA002US

mil
]
io a ort, io
se seEee
a
A " rel ee)
=
eae
. a at oo
7 a
Fae = A t=
a
= ae
| fF a att =
= Va | .
fh : o
[a] L) : .
=
The following is valid for Q3 vehicle models:
CL3BPA002US
alae.
oo
Oo a
The test program initially prompts you to use a USB medium (see parts information for part number).
The automatic execution of software updates results in inactive time. This is considered in the warranty
accounting instructions.
The USB-C stick can be removed after completing the program.
Note: If the procedure has been interrupted, please repeat step 1. The test program will then automatically
perform the missing part of the update.
2. Bus sleep mode
Put the vehicle in bus sleep mode after performing the software update.
Then switch the ignition back on and start the MMI.
3, Check emergency call LED
Check whether the emergency call LED in the roof module lights up in green again.
If the LED does not turn green, please refer to TSB 2079652 Emergency call LED in roof module not lit up in
green.

4. End diagnostic session and send diagnostic log online.
Warranty
Claim Type: + — Ifthe vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.
Service Number: Complaints about emergency call function or online services
Service number/damage code: 9170
Complaints about MMI functions
Service number/damage code: 9196
Damage Code: 0041
Labor Operations: Prepare repair 01510010 | 20 TU
- Vehicle parked
- Charge 12 V battery
Launch software update for MMI and emergency call 0151 0040 |60TU
module
- Connect tester, start ODIS
- Flash mode
- Function Authorized Multiple Code Entry
- Copy/paste the code chain ==> Start
- Insert the USB stick.
- Program runs automatically (service technician is not
required)
Conclude software update
- End the current test program
- Remove the USB stick
- Bus sleep cycle
- Check emergency call LED
- Quit the diagnostic session
- Disconnect charger
Claim Comment: As per TSB 2081007/2
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
When performing the combined software update, time stamps are not required for billing under warranty. You are
therefore permitted to work on other vehicles at the same time. The combined software update can also be
performed by non-productive personnel.

The Guided Fault Finding test plans should not be carried out for diagnostic entries that are repaired by performing
this TSB and cannot be invoiced.

Required Parts and Tools
The following applies when creating the update media:

Please prepare the required USB-C sticks before starting the repair.
You must not use an SD card with an adapter USB stick.
You cannot invoice the USB-C stick and loading the software.

General information on USB-C sticks for software updates can also be found in TSB 2060523 91 MIB3: Software
Update Instructions.

MIB3 update media:

Download the software with the corresponding part number onto a USB-C stick (min. USB 2.0 with 32 GB).

Please do not use a USB-C stick with a larger storage capacity as such USB sticks have a different formatting
process.

Vehicle type (PR code)

MIB3 Basic (I8W) 8W0906961GH

MIB3 High (I8Y) 8W0906961GG
Additional Information
All parts and service references provided in this TSB (2081007) are subject to change and/or removal.
©2026 Audi of America, LLC / Audi Canada Inc. All rights reserved. The information contained in this document is
based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make
changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.