Loading...

NHTSA ID Number: 11032036

Manufacturer Communication Number: WRE-25R

TSB/Document Date: 2026-05-04


Summary

Subaru of America, Inc. (Subaru) has initiated a safety recall for certain 2023-2025 model year Solterra Vehicles to update the Parking Assist Electronic Control Unit (ECU) software.


ATTENTION:
GENERAL MANAGER

q

PARTS MANAGER

q

CLAIMS PERSONNEL

q

IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.

SERVICE MANAGER

q

© 2026 Subaru of America, Inc. All rights reserved.

SERVICE PROGRAM BULLETIN
APPLICABILITY:
SUBJECT:

2026 MY Outback (Turbo)

NUMBER: WRE-26
DATE: 04/08/26

Rear Exhaust Pipe/Muffler Gasket

In the interest of customer satisfaction, SubarueBay logo of America, Inc. (Subaru) is initiating a service program
for certain 2026 model year Outlook vehicles equipped with the 2.4L turbo engine and trailer hitch accessory kit.
REASON FOR THIS SERVICE PROGRAM:
Under certain conditions, the subject vehicles may experience a gap created at the joint between the
exhaust pipe and the muffler due to incorrectly specified muffler gaskets included in the trailer hitch
kit. This gap may increase perceived engine noise during use.
AFFECTED VEHICLES:
The number of U.S. vehicles included in this service program is 22.
Model Year
Carline
2026
Outback (Turbo)

Production Date Range
October 1, 2025-October 23, 2025

Not all vehicles in the production date range listed above may be included in this service program.
Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function
on subarunet.com. This information will be available today.
DESCRIPTION OF THE REPAIR:
SubarueBay logo retailers will replace the muffler gaskets with the correct parts at no cost to the customer.
RETAILER RESPONSIBILITY:
Any vehicles listed in any recall or campaign that are in retailer stock must be:

Immediately identified

Tagged or otherwise marked to prevent their delivery or use prior to repair

Repaired in accordance with the repair procedures outlined in the Bulletin

CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.

SubarueBay logo of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the internationaleBay logo standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.

Continued...
Bulletin Number: WRE-26; Date: 04/08/26

Page 1 of 8

Retailers are to promptly perform the applicable service procedures, to correct all affected vehicles in
their inventory (new, used, demo & SSLP). Additionally, whenever a vehicle subject to this service
program is taken into inventory or in for service, necessary steps should be taken to ensure the repair
has been made before selling or releasing the vehicle.
OWNER NOTIFICATION:
SubarueBay logo will notify affected vehicle owners by first class mail on April 6, 2026.

PART INFORMATION:
Part Description

Part Number Qty

GASKET

44011SG010

2

SELF LOCK NUT M10

902330011

4

Image

SERVICE PROCEDURE FLOW CHART:

Continued...
Bulletin Number: WRE-26; Date: 04/08/26

Page 2 of 8

COMPONENT CONFIGURATION:
NOTE: Since the procedure is the same for both left and right sides, the Service Procedure in this campaign describes the left side procedure for example purposes.

Continued...
Bulletin Number: WRE-26; Date: 04/08/26

Page 3 of 8

SERVICE PROCEDURE / INFORMATION:
CAUTION: The exhaust pipe may be extremely hot. Always allow sufficient time for the exhaust to
cool in order to avoid any possible injury.
STEP 1: Raise the vehicle on a lift.

STEP 2: Loosen the nuts securing the rear
exhaust pipe and muffler, remove the bolts, and
discard the nuts as they are not reusable.
CAUTION: Avoid contact between the muffler
and the rear bumper.

STEP 3: Remove the gasket and discard it as
non-reusable.
NOTE: It is not necessary to remove the rear
exhaust pipe, or the mufflers form the vehicle
to replace the gaskets.

STEP 4: Evenly press on the NEW gasket and
install it onto the rear exhaust pipe.

Continued...
Bulletin Number: WRE-26; Date: 04/08/26

Page 4 of 8

STEP 5: Connect the rear exhaust pipe and the
mufflers, then secure them hand tight with the
bolts and NEW nuts.

STEP 6: Tighten the nuts to 48 Nm (35.4 ft-lb).

STEP 7: Replace the RH-side gasket using the
same procedure.

STEP 8: Lower the vehicle from the lift.

STEP 9: Start the engine and confirm that there are no exhaust leaks & no noise between the rear
exhaust pipe and the mufflers.

CALIFORNIA “VEHICLE EMISSION RECALL - PROOF OF CORRECTION” CERTIFICATE
The California Air Resources Board and the Department of Motor Vehicles Registration/Recall
Program requires that all emission related Recall/Campaign or Service Program repairs be completed
before a vehicle registration is renewed. Please provide owners of vehicles registered in the state of
California a completed “Vehicle Emission Recall - Proof of Correction” certificate. Vehicle owners
should be advised to retain this certificate because the California Department of Motor Vehicles may
require they provide proof this service program repair has been completed. Additional certificates
are available through normal parts ordering channels using part number MSA6P1301. Quantity 1 = 1
booklet of 50 certificates.

Continued...
Bulletin Number: WRE-26; Date: 04/08/26

Page 5 of 8

SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identification Label. The completed label
should be attached to the vehicle’s upper radiator support. Additional labels are available through
normal parts ordering channels. The part number is MSA6P1302, which comes as one sheet of 20
labels.
Part Number
MSA6P1302

Applicability
All Models

Description
Campaign Completion Labels (contains one sheet of 20 labels)

Order Quantity
1

CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers
may submit claims through Subarunet.com.
Claim Type
RC

Labor Description
Tailpipe/Muffler Gasket R&R

Labor Operation #
100281

Labor Time
0.3

Fail Code
WRE-26

IMPORTANT REMINDERS:

SOA strongly discourages the printing and/or local storage of service information as previously
released information and electronic publications may be updated at any time.

Always check for any open recalls or campaigns anytime a vehicle is in for servicing.

Always refer to STIS for the latest service information before performing any repairs.

Continued...
Bulletin Number: WRE-26; Date: 04/08/26

Page 6 of 8

This notice applies to the VIN identified in
the address section printed below

SubarueBay logo of America, Inc
PO Box 9103
Camden, NJ 08101-9877
844-373-6614
www.subaru.com

Subaru Service Program WRE-26
April 2026

Dear Subaru Owner:
We would like to thank you for your selection of a Subaru vehicle. We take pride in our products and
are committed to your continued satisfaction.
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a service program
for certain 2026 model year Outlook vehicles equipped with the 2.4L turbo engine and trailer hitch accessory kit.
You received this notice because our records indicate that you currently own one of these vehicles.
REASON FOR THIS SERVICE PROGRAM
An incorrect exhaust gasket may have been installed at the time of installation of your trailer hitch. Under certain conditions, a gap may develop at the joint between the exhaust pipe and the muffler. This gap
may increase perceived engine noise during use of your vehicle.
REPAIR
Subaru will replace the muffler gaskets with the correct parts at no cost to you.
HOW LONG WILL THE REPAIR TAKE?
The actual time to perform this repair is approximately 20 minutes. However, it may be necessary to
leave your vehicle for a longer period of time to allow your Subaru retailer flexibility in scheduling.
WHAT YOU SHOULD DO
Please contact your Subaru retailer for an appointment to have this repair performed.
CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?
If you have moved or sold your vehicle, please go to https://www.subaru.com/support/customer-support.
html to send us your information.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a
Retailer’.

A subsidiary of SUBARU CORPORATION

IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a
Retailer’.
For additional information, please go to: http://www.wre26.service-campaign.com.

If you need additional assistance, please contact us directly:
By e-mail: Go to www.subaru.com, Customer Support and select ‘Contact Us’

By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET

By U.S. Postal mail: Write us at Subaru of America, Inc.,
Attn: Customer Advocacy Department,
P.O. Box 9103, Camden, NJ 08101-9877

Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free
of charge.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken
this action in the interest of your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible to have this
repair performed.
Sincerely,
Subaru of America, Inc.

A subsidiary of SUBARU CORPORATION

1

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, Supports J2534/D-PDU/CAN-FD/DoIP
318 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, Supports J2534/D-PDU/CAN-FD/DoIP
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
Bestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [375.58 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: WRE-25R

Replacement Service Bulletin Number:

MFR Communication Date: 2026-04-24

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ELECTRICAL SYSTEM

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Diagnostic Scan Tool, ECU Coding PMI OBD2 Scanner
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSOMM IF745 Full System OBD2 Scanner Code Reader
  • 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
  • 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
  • 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
  • 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
  • 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.

This product presentation was made with AAWP plugin.

Share to...