Connection offline
Technical Service Bulletin

Transaction No.: 2080915/1

64-26-03 – ID.4 Window Pinch Protection Overly Sensitive

Condition
Applicable Vehicles
Model(s)

Year

Eng. Code

Trans. Code

VIN Range
From

VIN Range To

PR Number
(s)

ID.4

2023-2025

All

All

E8_PC000001

E8_SC018484

Without NI9

Revision Table
Instance Number

Published Date

Version Number

Reason For Update

2080915/1

3/17/2026

64-26-03

Original Publication

NOTICE
Make sure that a suitable 12V battery charger (VAS 5908 or equivalent with 100 amp capability) is
connected to support the 12V battery.

NOTICE
DO NOT diagnose or replace components before performing the update function as explained in this
bulletin.

NOTICE
Prior to launching the ODIS Service diagnostic applications and starting control module update process,
confirm tester screen saver and power settings in accordance with VHW-22-13 Change Power Options in
Windows® 10 (or latest communication). Failure to do so may result in the tester entering power save
mode during data transfer, and subsequent control module failure. When using a VAS 6150/X or 6160
/X tester in conjunction with a VAS 6154A or 6154B wireless transmitter head for a flash procedure,
connect a USB cable between the transmitter head and the tester. Failure to do so may lead to errors
during the flash procedure.
– VAS tools must only be used with their power adapters plugged in. Under no circumstances should
they be used on battery power alone during the programming procedure.

Technical Background

Pinch protection is overly sensitive.

Production Solution
Not applicable.

Service
Perform parameterization on the following door modules:
1. Perform GFF > Test plan > Select self-test > 0042 – Parameterize door control module (Figure 1).
2. Perform GFF > Test plan > Select self-test > 0052 – Parameterize door control module (Figure 2).

Figure 1

Figure 2

The parameterization test plan includes software configuration and basic settings for calibration of soft-stop
positions for each door control module (for example, Figures 3 and 4).

Figure 3

Figure 4

NOTICE
When performing a software configuration update, the test plan function must be used.

After performing software configuration if pinch protection is still overly sensitive continue with normal
diagnosis.

WARNING
Critical Warning: The battery charger must be connected to the vehicle battery for the duration of the
programming, to ensure the battery state of charge remains above 12.5 volts during the update
process. If the battery drops below 12.5 volts, the programming could fail which may result in damage to
the control module. Control modules damaged by inadequate voltage will not be covered under the
warranty policy. The technician should verify the vehicle voltage prior to starting the update process and
should monitor the voltage for the duration of the update.
– The procedure may cancel itself if the hazard warning lights are not switched ON. The hazard warning
lights prevent the system from switching to bus sleep mode during the update.
– ODIS-Service tester should be updated to the latest GFF technical version 25.2.1 or higher and SW
version 2.55.1 or higher.

CAUTION
Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury
may result if contact is made with spinning fan blades.
– Keep hands and all objects away from Radiator Fan(s) during Update Process!

Warranty

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)

Year(s)

ID.4

2023 -2025

Eng.
Trans.
Code(s) Code(s)
All

All

VIN Range From

VIN Range To

PR Number
(s)

E8_PC000000

E8_SC018484 Without NI9

SAGA Coding
Claim Type:

Service Number:
6454
Parts Manufacturer

Use applicable Claim Type 1)
Damage
Code
001

HST

Damage Location (Depends on Service No.)

--

Use applicable when indicated in Elsa (L/R)

ID.4 (MY23-24)

WWO 2)

ID.4 (MY25)

VOA 2)

Labor Operation 3) : GFF/ Guided functions
(including Battery charge)

01500010 = See Elsa for latest time units

Labor Operation 3) : Update Programming
Door Control Module

See GFF Time expenditure

Diagnostic Time 4)
GFF Time expenditure

01500060 = Actual GFF print out with a max of
50TUs

YES

Road Test

01210002 = see Elsa for latest time units

NO

01210004 = see Elsa for latest time units
Technical Diagnosis

01320000 = 00 TU max.

NO

Claim Comment: Input “As per Technical Bulletin 2080915 in comment section of Warranty Claim.
1)

Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only.

2)

Code per warranty vendor code policy.

3)

Labor Time Units (TUs) are subject to change with ELSA updates.

4)

Documentation required per Warranty Policies and Procedures Manual.

Required Parts and Tools
No Special Parts required.

Tool Description

Tool No:

Battery Maintainer

VAS5908 battery maintainer

VAS Diagnostic Tool

VAS 6150/X & VAS 6160/X
ODIS Service with current online updates

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
© 2026 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is
based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors.
All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites,
without the prior expressed written permission of the publisher.