Kia America, Inc.
Corporate Headquarters
111 Peters Canyon Road, Irvine, CA 92606-1790 USA

PRODUCT IMPROVEMENT CAMPAIGN

RENOTIFICATION
MARCH 24, 2026
THIS IS A RENOTIFICATION OF AN EARLIER COMMUNICATION ISSUED ON AUGUST 11, 2021, WHICH NOTIFIED ALL OWNERS OF THE
AFFECTED 2016 MY KIA FORTE AND FORTE KOUP VEHICLES EQUIPPED WITH 2.0-LITER GDI ENGINES OF A PRODUCT
IMPROVEMENT CAMPAIGN. OUR RECORDS INDICATE THAT YOU ARE THE CURRENT REGISTERED OWNER OF THIS VEHICLE AND
THAT THIS CAMPAIGN HAS NOT BEEN COMPLETED.
KIA IS REQUESTING THAT YOU CONTACT AN AUTHORIZED KIA DEALERSHIP TO SCHEDULE AN APPOINTMENT TO HAVE THE
DEALER PERFORM THE KNOCK SENSOR DETECTION SYSTEM (“KSDS”) SOFTWARE INSTALLATION IN YOUR VEHICLE FREE OF
CHARGE AT NO COST TO YOU.
UPON COMPLETION OF THIS SOFTWARE UPDATE, KIA WILL ALSO WARRANT ANY ENGINE LONG BLOCK ASSEMBLY REPAIRS
NEEDED DUE TO CONNECTING ROD BEARING DAMAGE FOR 15 YEARS/150,000 MILES STARTING FROM THE DATE THE VEHICLE
WAS FIRST PUT INTO SERVICE, WHICHEVER OCCURS FIRST, FOR BOTH NEW AND USED VEHICLE OWNERS.
IF YOU HAVE ALREADY TAKEN YOUR VEHICLE TO A KIA DEALER AND HAD THIS CAMPAIGN PERFORMED, PLEASE DISREGARD THIS
NOTICE.

PRODUCT IMPROVEMENT CAMPAIGN
August 11, 2021
Dear Kia Forte and Forte Koup Owner:
Kia America, Inc. is conducting an important Product Improvement Campaign to perform a software update on 2016 MY Forte
and Forte Koup vehicles equipped with 2.0-liter GDI engines to protect the engine from excessive connecting rod bearing
damage. The update will be done free of charge and will only involve the addition of newly developed computer software for
the Engine Control Unit (“ECU”).
Why is Kia Conducting This Product Improvement Campaign?
Kia has developed a Knock Sensor Detection System (“KSDS”) that detects vibrations indicating the onset of excessive
connecting rod bearing wear in the engine. The KSDS is designed to alert a vehicle driver at an early stage of bearing wear
before the occurrence of severe engine damage including engine failure.
What Will Kia Do?
•

At no cost to you, Kia will perform a software update to the ECU in your vehicle.

•

Upon completion of the KSDS software update, Kia will warrant any engine long block assembly repairs needed due to
connecting rod bearing damage for 15 years/150,000 miles starting from the date the vehicle was first put into service,
whichever occurs first, for both new and used vehicle owners.

What Should You Do?
•

Please contact your authorized Kia dealer immediately to have the KSDS software installed on your vehicle and to take
advantage of this extended warranty on your engine should your engine suffer damage due to excessive connecting rod
bearing wear in the future. The estimated time required to update the ECU in your vehicle is approximately one (1) hour,
depending on your dealer’s schedule. We recommend that you contact your local Kia dealer to schedule a service
appointment by phone or online to minimize inconvenience.

•

To find your nearest Kia dealer, visit www.kia.com and click the “Find Dealer” button in the upper right corner (“Dealers”
on a mobile device). You can also use the QR code below with your mobile device to access this information (see the

bottom of this letter for more information about QR code use):

IMPORTANT
o

Continue to follow the maintenance schedule outlined in Section 7 (Maintenance) of your vehicle’s Owner’s

o

Improper maintenance during the warranty period, including the extended warranty Kia is providing, may affect

Manual.
warranty coverage. In order to maintain the warranty on your engine, you must maintain it in accordance with
the time and mileage specifications provided in your vehicle’s Owner’s Manual, using quality products meeting
Kia’s specifications.

o

You should retain documents that show proper maintenance has been performed in order to establish compliance
in the event the diagnosed engine-related condition is determined to exist as the result of a lack of maintenance
as indicated by the condition of the engine.

Place this letter in your vehicle’s glove compartment, preferably together with your vehicle’s other warranty information.

•

When seeking service, refer this letter to your servicing Kia dealer. If you sell your vehicle, ensure that you include this
letter with the documents you provide to the buyer.
What Will Happen Once The Knock Sensor Detection System Software Update Has Been Completed?
If excessive bearing wear is detected after the KSDS software update has been completed, the following will occur:
1.

The Malfunction Indicator Lamp (“MIL”) will blink continuously, and the vehicle will be placed in a reduced power and
acceleration mode [referred to as “Limp Home Mode”].
Malfunction Indicator Lamp (“MIL”)

2.

Your vehicle can continue to be operated for a limited time in Limp Home Mode to permit you to drive the vehicle to
a safe location, but it will accelerate slowly and have a reduced maximum speed. Engine RPMs will be limited to
approximately 1800-2000 RPM. This means the maximum vehicle speed will be limited to approximately 65mph or
less depending on vehicle loading and road conditions.

Should the above occur in your vehicle (blinking MIL and Limp Home Mode), contact your Kia dealer immediately to have
your vehicle inspected.
WARNING:
o

If you ignore the blinking MIL and continue to drive your vehicle in Limp Home Mode for

o

The Kia service technician will be able to read how long you have driven your vehicle after the KSDS

o

It is important that you understand that an abusive failure to take the vehicle to a Kia dealer after KSDS activation

an extended number of miles, your vehicle may eventually experience severe engine damage and stall.
is activated.
may void the extended warranty KMA is providing with completion of this Product Improvement Campaign.

Have You Changed Your Address Or Sold Your Kia?
•

If you have changed your home address, sold your Kia vehicle, or no longer own your vehicle, please complete the
attached prepaid “Change of Address/Ownership” card and mail it to us.

What If You Have Other Questions?
•

Should you have any questions regarding this Product Improvement Campaign or if your Kia dealer does not respond to
your service request in a timely manner, please contact Kia’s Customer Care Center at 1-800-333-4542 (Monday
through Friday, 5AM to 6PM, Pacific Standard Time), or through the owner’s section of www.kia.com.

Please accept our apologies for any inconvenience this matter may cause you.
Sincerely,
Customer Care Department

QR Code Use:
•
A QR Code is a square, 2-dimensional barcode that can be read by mobile devices loaded with an appropriate barcode or QR Code Reader App. The app reads the barcode
image and then launches/uploads the specific information the code contains, such as URLs, text, photos, videos.
•
With a mobile device, download a QR Code Reader App. With many devices, you can do this through an app store or marketplace.
•
Open the QR Code Reader App on your mobile device. The app will utilize your device’s camera. Center the code in the camera viewing area. With some apps, the URL
or other information will automatically load when the code is recognized. For others, you may have to snap or take a picture of the QR code. Refer to the QR Reader Code
PI2105 FL501