GROUP

NUMBER

ADAS

Technical Service Bulletin
SUBJECT:

DATE

26-AD-001H
MODEL(S)

FEBRUARY 2026

SEE BELOW

FRONT VIEW CAMERA WARNING AND CALIBRATION
(DTC C272246)

Description: Some 2019MY and newer vehicles equipped with a front view camera may illuminate
certain warning lights and trigger DTC C272246 fault code for the front camera.
In the following cases, the front camera auto-calibration range may be exceeded while driving:
• If the front camera is not properly installed and is completely or partially detached.
• In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy
cargo in a specific location of the vehicle, or significant under-inflation of the tires).
• Specific road conditions affecting the vehicle's balance (e.g., excessive road crown)
This TSB provides instructions on how to service the vehicle when the front camera related warning
light(s) are triggered due to system out of calibration (DTC_C272246).
C272246 – System Out of Calibration
Possible Warning lights due to the front camera exceeding its calibration tolerance:

Applicable Vehicles: 2019MY or later models equipped with a front-view camera

NOTICE
To avoid any potential damage to Hyundai EVs, Hyundai EV repairs can only be performed by EV
certified Hyundai retailers.

Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair

SUBJECT:

FRONT VIEW CAMERA WARNING AND CALIBRATION (DTC C272246)

Parts Information:
Model

Part Name

Part Number

2019MY
or Later
Models

Unit Front
View
Camera

Refer to the parts catalog for the
applicable part number

Figure

Quantity

1

Warranty Information:
Model

Op. Code

Operation

Op. Time

Causal Part

2019MY or
Later Models
Equipped with
a Front-View
Camera

95470A00
&
95470R00

Front Camera
Replacement
and Calibration

Refer to
WebLTS for
current LTS
time

Refer to WebLTS for
applicable part to
labor op code
combination

Nature Cause
Code Code

W11

ZZ5

NOTE 1: Normal warranty applies.
NOTE 2: Submit claim on Claim Entry Screen as “Warranty” type.
NOTE 3: If any part(s) not subject to this TSB are found in need of replacement while performing the
repair procedure, and the affected part(s) are still under warranty, the dealer may submit a separate
claim using the same repair order. If the part(s) not subject to this TSB are out of warranty coverage,
the dealer has the option to submit a PA Request for goodwill consideration on a case-by-case basis.
NOTE 4: The incident parts are subject to callback through the normal Warranty Technical Center
(WTC) parts return process. Claim is subject to debit if the part is not returned.
NOTE 5: The incident parts are subject to callback through the normal Warranty Technical Center
(WTC) parts return process. Claim is subject to debit if the part is not returned.

TSB #: 26-AD-001H

Page 2 of 4

SUBJECT:

FRONT VIEW CAMERA WARNING AND CALIBRATION (DTC C272246)

Service Procedure:

DIGITAL DOCUMENTATION
This TSB includes repair justification in the form of automatically uploaded DTC(s) via GDS eReport at the time of diagnosis. To ensure adherence to the Digital Documentation Policy
before claim submission, DTC history can be reviewed via the e-Report function within the
GDS.

Front Camera Calibration
1A.

Connect GDS to the vehicle and check for
DTC C272246:
• If the DTC is ACTIVE, then proceed to
replace the front view camera. Refer to
the shop manual for the front view
camera replacement procedure.
• If the DTC is in the history, then NO
action is required.

1B.

If DTC 272246 is triggered, do NOT perform
the front camera calibration using the target.
If the front camera target calibration is
performed, it will cause another DTC 2721.
C2721 - System Calibration Required LDWS
(Lane Departure Warning System).

i

Information

If DTC 2721 is triggered, turn the ignition
OFF/ON and then perform the driving
calibration with the usage of the GDS.
Select “FR/CMR – Front View Camera”,
“Front Camera Driving Calibration
(SPC)”, and follow the instructions in the
GDS to perform the driving calibration.

TSB #: 26-AD-001H

Page 3 of 4

SUBJECT:

FRONT VIEW CAMERA WARNING AND CALIBRATION (DTC C272246)

2.

Confirm and if necessary, address the concern
for the possibility of the following conditions:
• Remove and re-install the front camera
in case it was seated improperly.
• Check all tires pressure, ensuring they
are set to specification.
• Ensure there is NO excessive load on
one side of the vehicle.
• Ensure the vehicle is not leaning too
much in the front end or rear end due to
excessive load.

3.

Test drive the vehicles under the following
conditions:
• Time: 5 minutes
• Speed: Over 18.6 MPH (30 KPH)
• Road: Straight with minimal curves (A)

i

Information

Calibration may fail when conducted on a
road with too much surface damage (B)
or too many curves (C).

i

A

B

Information

If attempt to perform front camera
calibration while DTC C2722 is ACTIVE,
it will cause DTC C272146
(System Calibration Required).
If DTC C272146 occurs, turn the ignition
OFF/ON, then perform driving calibration
with GDS.

4.

Verify the front camera operates normally.

5.

The service procedure is now complete.

TSB #: 26-AD-001H

C

Page 4 of 4