TECHNICAL SERVICE BULLETIN
Illuminated MIL With DTC P0767 And Intermittent/Permanent No Reverse Engagement

26-2058
20 February 2026

This bulletin supersedes 25-2567. Reason for update: update vehicle model years, TSB title, Issue statement, and correct claim quantity discrepancies in
the Parts List.
Model:
Ford
2023-2025 Bronco Sport

Transmission: 8F35

2023-2025 Maverick

Transmission: 8F35

Markets: North American markets only
Issue: Some of the vehicles listed in the Model statement above may exhibit all of the following conditions:
• Intermittent or permament no reverse engagement
• Illuminated MIL with DTC P0767 stored in the PCM
In addition to the required conditions, the vehicle may also exhibit a harsh reverse engagement and/or DTCs P0766, and/or P2703 stored in the PCM. This
may be due to an internal mechanical concern with the SOWC.
Action: For vehicles that meet all of the criteria in the Issue and Model statements, follow the Service Procedure to replace the SOWC.
Parts
Service Part
Number

Package
Order
Quantity

Claim Quantity

JM5Z-7P030C

1

JM5Z-7N265E

2

JM5Z-7N265G

3

JM5Z-7N142A

1

JM5Z-7N142D

1

JM5Z-1S177-A

2WD Requires 2, AWD Requires 1

Description
Selectable One Way Clutch
Small Clutch Feed Seal
Large Clutch Feed Seal
Snubber O-ring Seal - Back
Snubber O-ring Seal - Front
Axle Seal

JM5Z-7A248-E

1

Converter Hub Seal

7Z490

1

Separator Plate Gasket - Lower - Refer To The Parts Catalog For The VIN
Specific Application

7Z490

1

Separator Plate Gasket - Upper - Refer To The Parts Catalog For The VIN
Specific Application

W718843S439

1

W716603S442

4

W500727S439

3

W500725S439

3

W721130S439

4

W520203S440

2

W719924S439

2

W520515S442

2

W500566S439

1

W713199S442

4

W720388S439

2

W719192S439

2

JX6Z-3D677-C

1

CCPZ-3B477G

2

W520102S442

2

YS4Z-3N324AA

1

JX6Z-5A215-C

1

Steering Shaft Bolt
Front Cross-member Bolts (Maverick Only)
Rear Lower Left Side Frame Bolt (75mm)
Rear Lower Right Side Frame Bolt (65mm)
Front Lower Frame Bolt
Tie Rod Nut
Ball Joint Bolt (Bronco Sport)
Ball Joint Nut
Roll Restrictor Bolt
Frame Bracket Rear Bolt
Subframe Bolt Rear
Subframe Upper Mounting Bolt
Steering Shaft Seal
Half Shaft Retaining Nut
Half Shaft Retainer Strap Nut (2WD Maverick Only)
Half Shaft Retainer Strap (2WD Maverick Only)
1.5L EcoBoost Lower Exhaust Clamp (Bronco Sport Only)

W715618S437

4

W720206S439

1

W719151S439

1

JM5Z-7G007A

6

W712658S439

2

W520103S442

2

LX6Z-5A215-D

1

2.0L Exhaust Clamp

LX6Z-5A215-A

1

Lower Exhaust Clamp (Bronco Sport)

W712503S440

2

W721614S439

2

W712449S439

2

W500545S901

Maverick Requires 2 pieces, Bronco
Sport Requires 3 pieces

JX6Z-3B498-B Maverick AWD/Bronco Sport requires 1
piece, Maverick 2WD requires 2 peices

Torque Converter Nut
Transmission Mounting Bolt (Bronco Sport Only)
Roll Restrictor To Transmission Case Stud Bolt
Valve Body Solenoid Mounting Plate
Solenoid Mounting Bolt
Exhaust Bracket Nut (Bronco Sport Only)

Lower Sway Bar Nut
Ball Joint Bolt (Maverick)
Roll Restrictor To Case Bolt
Roll Restrictor Bolt
Halfshaft Cir-Clip

PM-4-A

As Needed

Motorcraft® Metal Brake Parts Cleaner (Compliant With Low Volatile Organic
Compound Requirements As Required In Some USA States) (All Markets
Except Canada)

PM-4-B

As Needed

Motorcraft® Metal Brake Parts Cleaner (Not Compliant With Low Volatile
Organic Compound Requirements) (All Markets Except Canada)

CPM-4-A

As Needed

Motorcraft® Brake Parts Cleaner - VOC Compliant (Canada Only)

XL-2

As Needed

Motorcraft® High Temperature Nickel Anti-Seize Lubricant

XL-5-A

As Needed

Motorcraft® Multi-Purpose Grease Spray

VC-13-G

As Needed

Motorcraft® Yellow Concentrated Antifreeze/Coolant (All Markets Except
Canada)

CVC-13-G

As Needed

Motorcraft® Yellow Concentrated Antifreeze/Coolant (Canada Only)

TA-29

As Needed

Motorcraft® Ultra Silicone Sealant

XT-12-QULV

As Needed

Motorcraft® MERCON® ULV Automatic Transmission Fluid

XG-3-A

As Needed

Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound

Parts - AWD Only
Service Part
Number

Claim
Quantity

Package Order
Quantity

Description

Note

JM5Z-7H260-A

1

Axle Seal - All Wheel Drive (AWD) Only

NZ6Z- 3B498-AA

1

Halfshaft Cir-Clip AWD Only

K2GZ-7275-B

1

PTU Kit Right Axle CirClip And O-ring

W719767-S439

2

PTU Intermediate Shaft Bolt

K2GZ-7086-A

1

PTU Intermediate Shaft Seal - Large

W719766-S439

5

PTU Bolt

K2GZ-7H469-D

1

Actuator To PTU Seal Kit

LX6Z-4B496-A

3

XY-75W85-QL

As Needed

1 piece includes 2 bolts and 1
connecting retainer

AWD Driveshaft Bolt
Motorcraft® SAE 75W-85 Premium Synthetic Hypoid
Gear Lubricant

Parts - Parts To Inspect And Replace Only If Necessary
Service Part Number Claim Quantity

Package Order Quantity Description

K2GZ-6758-H

Only If Necessary (Up To 1)

Engine Vapor Tube

M1PZ-16038-A

Only If Necessary (Up To 1)

Bronco Sport Right Fender Moulding

M1PZ-16039-A

Only If Necessary (Up To 1)

Bronco Sport Left Fender Moulding

W717959-S300

Only If Necessary (Up To 2)

Transmission Mounting Dowel Pin (1.5L Engine)

W701350-S900

Only If Necessary (Up To 2)

Transmission Mounting Dowel Pin (2.0L Engine)

W712458-S900

Only If Necessary (Up To 2)

Exhaust Stud

JM5Z-7F228-A

Only If Necessary (Up To 1)

Forward Clutch Inner Seal

JM5Z-7A548-F

Only If Necessary (Up To 1)

Forward Clutch Outer Seal

Claim Quantity refers to the total number of individual pieces required to repair the vehicle. This may differ from the number of service part number
packages due to the unit of issue (UOI).
As Needed indicates the part is necessary but amount of the part may vary and/or is not a whole number. Parts can be billed out as non-whole numbers,
including less than 1.
Only If Necessary indicates the part is not mandatory. Refer to the Service Procedure to determine the inspection/inclusion criteria.
Special Tool(s)

Fixture, Bench Mount
307-769

Holding Fixture, Transmission
307-003
Handle, Torque Converter
307-091

Warranty Status: Warranty coverage limits and policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
Labor Times
Description

Operation
No.

Time

2023-2025 Maverick FWD 2.0L: Retrieve DTCs Replace The SOWC And Overhaul The Main Control Valve Body (Can Be Claimed
With E) (Do Not Use With Any Operations Outside Of This Article)

262058A

14.4
Hrs

2023-2025 Maverick AWD 2.0L: Retrieve DTCs Replace The SOWC And Overhaul The Main Control Valve Body (Can Be Claimed
With E) (Do Not Use With Any Operations Outside Of This Article)

262058B

16.5
Hrs

2023-2025 Bronco Sport 1.5L: Retrieve DTCs Replace The SOWC And Overhaul The Main Control Valve Body(Can Be Claimed
With E, F And G) (Do Not Use With Any Operations Outside Of This Article)

262058C

14.4
Hrs

2023-2025 Bronco Sport 2.0L: Retrieve DTCs Replace The SOWC And Overhaul The Main Control Valve Body (Can Be Claimed
With E, F And G) (Do Not Use With Any Operations Outside Of This Article)

262058D

18.2
Hrs

262058E

0.8
Hrs

262058F

0.5
Hrs

2023-2025 Bronco Sport, Maverick: Additional Time To Check And Correct Toe (Can Be Claimed With A, B, C Or D)
2023-2025 Bronco Sport: Additional Time To Align Parking Aid Camera If Equipped (Can Be Claimed With C Or D)

2023-2025 Bronco Sport: Additional Time If Equipped With PTU Cooler (Can Be Claimed With C Or D)

262058G

0.2
Hrs

Repair/Claim Coding
Causal Part:

7P030

Condition Code: 69

Service Procedure
1. Remove the transmission. Refer to WSM, Section 307-01.
2. Using the special tool, secure the transmission to the bench mounted fixture.
Use Special Service Tool: 307-769 Fixture, Bench Mount.
Use Special Service Tool: 307-003 (T57L-500-B) Holding Fixture, Transmission.
3. Using the special tools, remove the torque converter.
Use Special Service Tool: 307-091 Handle, Torque Converter
4. Remove the main control valve body. Refer to WSM, Section 307-01.
5. Disassemble the transmission only far enough to access the SOWC. Refer to WSM, Section 307-01 > Overhaul and perform Steps 34-66.
6. Remove the SOWC and disassemble the A-clutch. Remove and discard the SOWC portion. Refer to WSM, Section 307-01 > Overhaul and perform
Steps 164-170.
7. Assemble the new SOWC with the A-clutch components. Refer to WSM, Section 307-01 > Overhaul and perform Steps 173-179.
NOTE: The A-clutch seals can be reused unless damaged.
8. Install the new SOWC and reverse the procedure to reassemble the transmission.
9. Overhaul the main control valve body. Refer to WSM, Section 307-01 > Main Control Valve Body.
10. Reinstall the main control valve body. Refer to WSM, Section 307-01.
11. Reinstall the transmission. Refer to WSM, Section 307-01.
12. Refill the transmission to the correct fluid level. Refer to WSM, Section 307-01.
13. Clear all DTCs.
NOTE: Advise the customer this vehicle is equipped with an adaptive transmission shift strategy which allows the vehicle's computer to learn
the transmission's unique parameters and improve shift quality. When the adaptive strategy is reset, the computer will begin a relearning
process. This relearning process may result in firmer than normal upshifts and downshifts for several days.

© 2026 Ford Motor Company
All rights reserved.
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs
these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by "do-ityourselfers". Do not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy

and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service
Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supersede this information with updates. The most recent information is available through Ford Motor
Company's on-line technical resources.