S2108000121 REV.B Service Bulletin/Repair Instructions

Case Number: S2108000121 - Rev. B

Release Date:
February 2026
Models Affected:

2021-2025 Jeep Wrangler 4XE (JL)

2022-2025 Jeep Grand Cherokee 4XE (WL)
Symptom/Vehicle Issue: Check Engine Light On And Service Hybrid System

Displayed. P0A0A-00 High Voltage System Interlock Circuit “A” Is Active
Discussion: If one or more of the HVIL(High Voltage Interlock Loop) connectors was

disconnected during a repair of the Hybrid System. Upon completing the repair, you

may find DTC P0A0A-00 High Voltage System Interlock Circuit “A” Active even though

proper torque of the HVIL connectors was achieved.

While proper torque may have been achieved, it is possible the HV connector did not

seat properly.
Repair: Engineering has recommended the following procedure be followed when

removing and installing ANY of the High Voltage connectors.

Inspect the HVIL connector seals for damage or tears and the terminals for spread

contacts. If any of the High Voltage connectors seals are damaged, the wiring harness

will need to be replaced. If HVIL terminals appear to be spread or damaged, HV

component replacement will be necessary. Contact STAR for assistance.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online

does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear

to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the

appropriate course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no

solution is found

FCA US LLC
Version 4.3 10/28/2020
Spread HVIL Terminals
Damaged HV Connector Seal
If no issues are found, continue with the installation procedure described below.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online

does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear

to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the

appropriate course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no

solution is found

FCA US LLC
Version 4.3 10/28/2020
A Torque Wrench MUST Be Used
Installation of HVIL Connector: Turn the HVIL connector bolt one revolution while

applying forward pressure and wiggling the connector, push it firmly so that it is

completely seated. Ensure the connector is seating square to the connector housing.

The Power Inverter Module (PIM) C3 connecter is especially prone to being installed at

an angle. Before torquing down the bolt, confirm that the C3 is fully and squarely

seated by utilizing the 3 windows provided around the orange plastic colored shield of

the connector. There should be no empty space when looking through the window.

When fully seated, only the aluminum PIM housing should be seen. Review the images

below.
C3
PIM C3 Connector Location
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online

does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear

to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the

appropriate course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no

solution is found

FCA US LLC
Version 4.3 10/28/2020
Not Good: Air Gap in Window
Good: No Air Gap in Window
Failure to squarely and fully seat the connector before torquing down the bolt

can result in HVIL terminal damage
Once the connector is in fully seated position, hand start the fastener and drive it until

the specified torque of 80 In-Lbs. or 9 Nm is achieved.

If the torque specification cannot be reached. The threads for the HVIL bolt may be

stripped. The threads can be re tapped using a M6x1.0 Tap.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online

does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear

to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the

appropriate course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no

solution is found

FCA US LLC
Version 4.3 10/28/2020
Verification: If the HVIL connector was improperly seated initially. The torqueing

procedure above should have allowed the HVIL terminals to make proper contact. The

P0A0A-00 should now be stored and able to be cleared. If the DTC is still active,

standard diagnostic procedures should be followed.
This document does not authorize warranty repairs. This communication documents a record of past experiences. STAR Online

does not provide any conclusions about what is wrong with the vehicle. Rather, it captures all previous cases known that appear

to be similar or related to the vehicle symptom / condition. You are the expert, and you are responsible for deciding on the

appropriate course of action.
Contact STAR Center, or your Technical Assistance Center Via TechCONNECT or eCONTACT ticket if no

solution is found

FCA US LLC
Version 4.3 10/28/2020

SaleBestseller No. 1

OBD2 Scanner Diagnostic Tool XTOOL Anyscan A30M V2.0, 2026 Wireless Bidirectional Scan Tool with Free Updates, 26 Resets, All System for Android & iPhone, Crank Sensor Relearn, EPB, Throttle Relearn

Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
Portable Car Scanner with 26 Resets: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
Wide Compatibility CAN FD & FCA Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it.
Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.

SaleBestseller No. 2

XTOOL Anyscan A30D OBD2 Scanner Diagnostic Tool - Bidirectional Scan Tool Wireless - Lifetime Updates & 19 Resets Crank Sensor EPB Throttle Relearn - Full System Car Code Reader for iPhone & Android

Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first

SaleBestseller No. 3

XTOOL D7 Bidirectional Scan Tool: 2026 Ai-Assisted OBD2 Scanner Diagnostic Tool with 36+ Resets, Full System Car Scanner with EPB, Injector Test, Throttle, Crank Sensor Relearn, FCA, CANFD & DoIP

2026 Latest Version – Now Upgraded from 32GB to 64GB: XTOOL D7 obd2 scanner diagnostic tool with bidirectional is designed for DIY enthusiasts, professional mechanics. It now offers 64GB storage for smoother operation. Its 5000mAh battery (with 2500mAh 7.3V fast-charging) supports all-day use. With FCA, CAN FD, and DOIP protocol support, it covers more vehicle models and newer systems. A newly added battery voltage reading shows battery status before diagnostics, helping prevent low-voltage tests that could harm the vehicle. The V2.0 Diagnostic Report allows shops to personalize results with logos, customer details, and attachments to build trust and maintain records.
Save $500+/Year with Pro-Level Diagnostics: Whether you're a DIYer, starting a repair business, or beginning work at an auto shop, XTOOL D7 car scanner offers advanced features typically found only in expensive professional OBD2 scanners - without the high price tag. With 4,000+ Active Tests & Bidirectional Pids, 36+ Special Functions, advanced module resets like SRS Reset, OE-level All-System Scan (one-click), FCA AutoAuth, CAN FD, DoIP, data export, and 8 PIDs graphing, the D7 auto scan tool covers 100,000+ vehicles (excluding Indian models). Includes 3-Year updates and supports the XV200 endoscope to detect em!ssions and intermittent issues.
Full Bidirectional Advantage Over Other Code Readers & Scan Tools: The XTOOL D7 automotive scanner offers true bidirectional control plus advanced bidirectional PIDs, letting you send commands to components like A/C clutches, fuel injectors, windows, fans and more, while monitoring sensor responses live to catch elusive issues (even those without warning lights). Unlike budget bidirectional obd2 scanners limited to basic active tests,the D7 car fault scanner gives you full bidirectional control to run ABS pump tests, throttle position, turn fan on/off and solenoid tests, etc. No guessing, no extra fees—just smarter diagnostics
OE-Level Full System Car Diagnostic Scanner with 8 Live Data Graphs: The XTOOL D7 is a pro-grade diagnostic tool that gives you full access to all vehicle systems—just like Snap on scanners & the factory scan tools, it delivers deep, accurate diagnostics you can trust. Easily view live data streams, retrieve freeze frame, and run active tests to pinpoint issues fast. With the ability to graph up to 8 PIDs at once, you can spot performance trends and troubleshoot like a pro. Whether you're a mechanic or car owner, with the D7 auto scanner you can stay ahead of problems and keep your vehicle running at its best
High-value Automotive Scanner Diagnostic Tool with 36+ Special Function, Module Resets, Relearns, Calibrations, Adaptations & Initializations: XTOOL D7 diagnostic tool packs 36+ common & advanced maintenance, skip the $150 fee for battery registration after replacement, throttle body relearn after cleaning, or TPMS resets post-rotation, Auto bleed after the pad changes, or Electronic Parking Brake. Need to reset the transmission after towing? Crank sensor relearn for GM/for Dodge? Done. D7 also covered advanced functions like Ad~blue Reset, VIN Write, and many more professional OBD2 scanner functions that we can't list here. Text us your VIN + what you need, we’ll check the compatibility

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor