NHTSA ID Number: 11028666
Manufacturer Communication Number: 26-EM-003H TSB
TSB/Document Date: 2026-02-10
Summary
Some Sonata (DN8, DN8A) vehicles may have DTCs P218100, P2181F0, and/or P2181F1 (Cooling System Performance) set in the Engine Control Module, resulting in an illuminated Check Engine warning lamp. Follow the procedure in this TSB to replace the Integrated Thermal Management (ITM) module and update both the Engine Control Module (ECM) and Transmission Control Module (TCM) if applicable. Follow the flowchart in this TSB to update the appropriate modules.
GROUP
NUMBER
ENGINE
MECHANICAL
Technical Service Bulletin
SUBJECT:
DATE
26-EM-003H
MODEL(S)
SONATA
(DN8/DN8A)
FEBRUARY 2026
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT &
ECM/TCU SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
IMPORTANT
This field action requires justification in the form of a customer concern, and a confirmed case for
the related symptom outlined in the TSB, prior to any repair work. If justification requirements are
not met, any submitted claims are subject to debit. 8 / 80,000 Emissions Warranty applies.
See Warranty Information section for more details.
Description: Some Sonata (DN8, DN8A) vehicles may have DTCs P218100, P2181F0, and/or
P2181F1 (Cooling System Performance) set in the Engine Control Module, resulting in an illuminated
Check Engine warning lamp. Follow the procedure in this TSB to replace the Integrated Thermal
Management (ITM) module and update both the Engine Control Module (ECM) and Transmission
Control Module (TCM) if applicable. Follow the flowchart in this TSB to update the appropriate modules.
Applicable Vehicles:
Model Year
Model
2021 – 2023
Sonata (DN8)
2020 – 2022
Sonata (DN8A)
Engine
2.5T, 2.5L GDI
Production Dates
02/08/2021 – 10/23/2023
10/22/2019 – 02/14/2022
Parts Information:
Model
Part Name
Part Number
Sonata
(DN8)
Control Assy – Coolant
Temperature
25600-2S650QQH
Sonata
(DN8A)
Control Assy – Coolant
Temperature
25600-2S600QQH
Sonata
(DN8, DN8A)
25462-2S000
Sonata
(DN8, DN8A)
Pink Antifreeze/
Coolant
00232-19098
Figure
Quantity
1
2
NOTE: Do NOT use 100% full strength antifreeze. Prepare coolant mixed with distilled/filtered water
to refill the cooling system (35-50% antifreeze, diluted with distilled/filtered water).
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
SST Information:
Tool Name
Tool Number
VCI 3
G0VHNNN06
Figure
Ordering Information
Website:
https://hyundaiessentialtools.com/
Email:
[email protected]
VCI 2
Phone: 1-855-763-9199
Hours: 7 AM – 7 PM CST
G1XDDMN001
NOTE: VCI 2 (P/N G1XDDMN001) can NO longer be ordered.
GDS Information:
Model
System Event Number*
Description
1244
DN8/DN8A 2.5TGDI P2181 IMPROVEMENT
1262
DN8(a) THETA3 2.5 GDI P2181 IMPROVEMENT
1075
DN8 THETA3 2.5GDI TCU S/W Improvement for ISG Logic
Improvement
1077
DN8a THETA3 2.5GDI TCU S/W Improvement for ISG Logic
Improvement
Engine
Sonata
(DN8, DN8A)
AT
(*or use a later available event listed in the GDS Engine or AT Update screen if one is available.)
TSB #: 26-EM-003H
Page 2 of 16
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
Warranty Information:
Model
Op. Code
Operation
50D070R0
THETA III T-GDI ITM Replacement &
ECM Software Update
1.8 M/H
39110-2S037
50D070R1
THETA III GDI ITM Replacement,
ECM & TCU Software Update
(ISG Option & Certain 2020-2022MY)
2.2 M/H
39110-2S037
50D070R2
THETA III GDI ITM Replacement &
ECM Software Update
(NO ISG Option,TCM is latest software,
and 2022-2023MY)
1.9 M/H
39110-2S037
50D070R6
THETA III T-GDI ITM Replacement &
ECU Software Update
1.8 M/H
39111-2S071
50D070R7
THETA III GDI ITM Replacement,
ECM & TCU Software Update
(ISG Option & 2020-2022MY)
2.2 M/H
39111-2S071
50D070R8
THETA III GDI ITM Replacement &
ECM Software Update
(NO ISG Option,TCM is latest software,
and 2022-2023MY)
1.9 M/H
39111-2S071
Sonata (DN8)
Sonata
(DN8A)
Op. Time Causal Part
Nature
Code
Cause
Code
L31
ZZ4
NOTE 1: Submit claim on Claim Entry Screen as “Campaign” type.
NOTE 2: 8 / 80,000 Emissions Warranty applies to the part(s) and repair procedure(s) outlined in this
TSB. Prior to beginning any repair work, ensure the part(s) associated with the repair procedure are
within NVLW, observing mileage and Warranty Start Date or date of first use. If the subject part(s)
are out of warranty coverage, the dealer has the option to submit a PA Request for goodwill
consideration on a case-by-case basis.
NOTE 3: If any part(s) not subject to this TSB are found in need of replacement while performing the
repair procedure, and the affected part(s) are still under warranty, the dealer may submit a separate
claim using the same repair order. If the part(s) not subject to this TSB are out of warranty coverage,
the dealer has the option to submit a PA Request for goodwill consideration on a case-by-case basis.
NOTE 4: This TSB includes repair justification in the form of automatically uploaded DTC(s) via GDS
e-Report at the time of diagnosis. To ensure adherence to the Digital Documentation Policy before
claim submission, DTC history can be reviewed via the e-Report function within the GDS. Additionally,
required photos include a capture of the ECU Update “Success" screen for the associated update
events.
NOTE 5: The incident parts are subject to callback through the normal Warranty Technical Center
(WTC) parts return process. Claim is subject to debit if the part is not returned.
NOTE 6: For proper engine operation, ITM replacement must be completed before the ECU updates.
NOTE 7: Engine Control Module software update is required in all applications. The Transmission
Control Module software update is only required for the 2.5L GDI vehicles equipped with ISG.
TSB #: 26-EM-003H
Page 3 of 16
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
Service Procedure:
DIGITAL DOCUMENTATION
This TSB includes repair justification in the form of automatically uploaded DTC(s) via GDS eReport at the time of diagnosis. To ensure adherence to the Digital Documentation Policy
before claim submission, DTC history can be reviewed via the e-Report function within the
GDS. Additionally, required photos include a capture of the ECU Update “Success" screen for
the associated update events.
NOTICE
Applying the recommended torque to all fasteners is essential to reduce potential issues from
occurring after the service procedure.
i
Information
This TSB ONLY applies if GDS fault code searching results identify DTCs P218100, P2181F0,
and/or P2181F1.
Table of Contents
•
Flowchart: ................................................................................................................................. 5
•
DTC Check ............................................................................................................................... 6
•
ITM Replacement ..................................................................................................................... 6
•
ECM Update Procedure ........................................................................................................... 8
•
TCU Update Procedure .......................................................................................................... 11
•
ITM Coolant Filling Mode........................................................................................................ 13
TSB #: 26-EM-003H
Page 4 of 16
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
Flowchart:
Vehicle In
DTC Check
P218100, P2181F0,
P2181F1
No
Yes
ITM
Replacement
Manual ECM
Software Update
(Event #: 1244)
T-GDI
Engine Type
Auto TCU
Software Update
GDI
Yes
Manual ECM
Software Update
(Event #: 1262)
TCU Software
Verification
No
ITM Coolant
Filling Mode
Normal
Diagnostic
Process
ITM Coolant
Filling Mode
Vehicle Out
TSB #: 26-EM-003H
Page 5 of 16
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
DTC Check
1.
Use GDS to scan for DTCs P218100,
P2181F0, and P2181F1 (Cooling System
Performance):
• If DTCs are NOT detected, then this
TSB does NOT apply. Follow the
normal diagnostic process.
• If DTCs are detected, then proceed to
the ITM Replacement procedure.
ITM Replacement
2.
Replace the ITM (A) by referring to the shop
manual.
• Engine Mechanical System > Cooling
System > Integrated Thermal
Management Module (ITM) > Repair
procedures
A
3.
Reinstall parts in the reverse order of the
removal process.
i
Information
The ITM design inverts the connector’s
orientation.
TSB #: 26-EM-003H
Page 6 of 16
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
Service Procedure:
NOTICE
Initially perform the ECM update in Manual Mode and TCU update in Auto Mode
(if applicable).
NOTICE
Ensure the vehicle’s battery charge is above 11.0 Volts and the tablet’s battery charge is above
30% before performing a software update to avoid the update from failing.
i
Information
•
Turn OFF all lamps (do NOT leave head lamp switch in auto mode) and all accessories.
•
Perform update with the ignition switch in the ON position.
•
Do NOT disconnect any cables connected to the vehicle or scan tool during update.
•
Do NOT start the engine during update.
•
Do NOT turn OFF the ignition switch during update.
Manual Mode Password:
Event
1244
(T-GDI)
1262
(GDI)
TSB #: 26-EM-003H
ECM Menu
Password
DN8(a) ITM TGDI ECU 39111-2S071 (G2X)
2071
DN8(a) ITM TGDI ECU 39111-2S071 (J0A)
1702
DN8(a) ITM TGDI ECU 39111-2S076
2076
DN8(a) ITM TGDI ECU 39111-2S077
2077
DN8 THETA3 2.5 GDI ECU 39110-2S037
2037
DN8 THETA3 2.5 GDI ECU 39110-2S038
2038
DN8 THETA3 2.5 GDI ECU 39110-2S039/278
2039
DN8 THETA3 2.5 GDI ECU 39110-2S040/279
2040
DN8 THETA3 2.5 GDI ECU 39110-2S041
2041
DN8 THETA3 2.5 GDI ECU 39110-2S042
2042
DN8a THETA3 2.5 GDI ECU 39101-2SDA0
5556
DN8a THETA3 2.5 GDI ECU 39101-2SDB0
5476
DN8a THETA3 2.5 GDI ECU 39103-2SDE0/G0/H0
5253
DN8a THETA3 2.5 GDI ECU 39104-2SDF0
1873
DN8a THETA3 2.5 GDI ECU 39100-2SDJ0/L0
9710
DN8a THETA3 2.5 GDI ECU 39100-2SDK0/M0
3895
Page 7 of 16
SUBJECT:
INTEGRATED THERMAL MANAGEMENT (ITM) REPLACEMENT & ECM/TCU
SOFTWARE UPDATE – DTCS P218100, P2181F0, P2181F1
ECM Update Procedure
Information
i
Perform the ECM software update in Manual Mode based on the engine type:
•
•
1.
T-GDI: Use Event 1244.
GDI: Use Event 1262
Perform the ECM update in Manual Mode.
i
Information
Refer to TSB # 25-GI-011H, “ECU
Update Procedure for Tablet-Based
GDS-Smart”, for additional information.
2.
Verify the ROM ID by selecting the ENGINE
system to scan the vehicle’s current ROM ID.
NOTICE
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
VCI 16Pin Cable 1pc x CD...Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 26-EM-003H TSB
Replacement Service Bulletin Number:
MFR Communication Date: 2026-02-05
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
- 🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE，UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAM+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCA AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
- 🚗【CAN FD & DOIP & FCA, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMW (E & F chassis) models from 2017 onward. Autoauth for FCA SGW supports FCA vehicles including Chrysler models from 2017 and later.
- ✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers exceptional ECU code capabilities for customized vehicle setups. It provides dealer-level functionality to streamline maintenance and repairs, enabling ECU matching and learning for enhanced customization.
- 👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
- 🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.