GROUP

MODEL

ELE

2025-2026MY
Seltos (SP2)

NUMBER

DATE

412

February 2026

TECHNICAL SERVICE BULLETIN
SERVICE ACTION: STEERING ANGLE
SUBJECT:

SENSOR CALIBRATION (SA641)

This bulletin provides information regarding the recalibration of the Steering Angle Sensor (SAS) on certain
Seltos (SP2 PE) vehicles produced from March 3, 2025, through August 11, 2025. During manufacturing, the
SAS in certain vehicles may not have been properly calibrated, resulting in a lower return-to-center feel after
completing a turn at low speeds. This does not result in a reduction of steering assist. To address this condition,
follow the procedure outlined in this bulletin to properly recalibrate the SAS. Before performing the procedure,
confirm that the vehicle is included in the affected VIN list.

 NOTICE
A Service Action is a repair program without customer notification that is performed during the
warranty period. Any dealer requesting to perform this repair outside the warranty period will
require DPSM approval.
Repair status for a VIN is provided on KDealer+ (Service → Warranty Coverage → Warranty
Coverage Inquiry → Campaign Information). Not completed Recall / Service Action reports are
available on KDealer+ (Consumer Affairs → Not Completed Recall → Recall VIN → Select Report),
which includes a list of affected vehicles.
This issue number is SA641.

A printed copy is for reference only; publication information can be updated at any time.
Always refer to KGIS for the latest information. After logging in kdealer.com, the newest technical
publications are listed in ‘Service Releases’ and has the latest service information that has been released.
Kia America, Inc. Confidential

Page 2 of 3

SERVICE ACTION: STEERING ANGLE SENSOR CALIBRATION (SA641)

SUBJECT:

Repair Procedure:
1.

Perform Steering Angle Sensor calibrtion by
referring to the following:
Shop Manual
“Steering System → Motor Driven Power
Steering

(MDPS)

→

Adjustment”

in

the

applicable Shop Manual on KGIS.
KDS
“S/W Management → Motor Drive Power
Steering → Steering Angle Sensor (SAS)
Calibration” on KDS.

 NOTICE
•

Refer to Both the Workshop Manual and the KDS Screens for Operation Conditions and
Details.

•

Confirm the Normal Operation of the Steering Wheel by Checking the Sensor Analyzation
Data Through KDS.

Printed document copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA641 Seltos (SP2) February 2026
Kia America, Inc. Confidential

Page 3 of 3

SERVICE ACTION: STEERING ANGLE SENSOR CALIBRATION (SA641)

SUBJECT:

AFFECTED VEHICLE RANGE:
Model

Production Date Range

Seltos (SP2)

March 3, 2025 to August 11, 2025

REQUIRED TOOL:
Tool Name

Part Number

Kia Diagnostic System

Figure

Comments

N/A

(KDS)

KDS + VCI

WARRANTY INFORMATION:
N Code: N99 C Code: C99
Claim
Type

Causal P/N

Qty.

Repair

Labor Op

Op

Replacement

Description

Code

Time

P/N

Qty.

(SA641)
V

56370 S9500

0

SAS Re-Calibration &
Confirm Normal

250158R0

0.3
M/H

N/A

0

Operation

For Substitute Transportation policy, please refer to Service Policy and Procedures Manual (SPPM)
6.11 “Kia Substitute Transportation”.

 NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference

SA641 when accessing the KDealer+ system.

Printed document copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.

TSB: SA641 Seltos (SP2) February 2026
Kia America, Inc. Confidential