NHTSA ID Number: 11028506
Manufacturer Communication Number: No. ASA3
TSB/Document Date: 2026-02-06
Summary
Technical information for ASA3 – Re-Program Reversing Camera Control Unit and, if necessary, Replace Reversing Camera and Surround View Cameras
4.4
Establish readiness for operation (ignition on).
Check readiness for driving the vehicle.
5.1
Operate the footbrake and keep it pressed.
5.2
Use the selector lever to engage driving gears D and R one after the other. The selected gear
must be displayed in the gear indicator on the instrument cluster.
5.3
Activate the parking lock via button P.
6
End readiness for operation (ignition off) and restore it after waiting for approx. 30 seconds (ignition
on).
7
Read out and delete fault memory.
AfterSales
Jan 13, 2026
Page 7 of 14
9
Service
ASA3
ENU
Technical Information
2025
Information
If control units are found to have faults that are not caused by control unit programming, these must
first be found and corrected.
Information
Due to the vehicle diagnosis and coding/programming, fault memory entries that do not indicate an
actual fault in the vehicle can be stored.
These fault memory entries can be deleted for the most part after repeated starting and a test drive.
The following fault memory entry is always stored as part of a vehicle diagnosis with the PIWIS Tester
and does not represent an actual fault:
Control unit
Fault code
Description
"various" control units
B184C00
Protection of vehicle diagnostics, actuation
active
Main control unit for gateway
HCP5 (J1273)
U17A000
Diagnostic filter, access protection deactivated
Drive and chassis main
control unit HCP1 (J1312)
C140DF0
Vehicle Protected Environment (VPE), vehicle
protection activated
7.1
If necessary, restore communication of the PIWIS Tester with the vehicle.
7.2
Press •F7“ to call up the additional menu on the PIWIS Tester.
7.3
Select and confirm the menu item "Read/delete all fault memories" and press to confirm.
7.4
Press •F8“ to delete the displayed fault memory entries.
8
Create Vehicle Analysis Log again. To do this, press •F7“ to access the additional menu and select
create protocol.
Flag the created VAL with "after repair".
9
End the diagnostic application, end readiness for operation (ignition off) and disconnect the PIWIS
Tester from the vehicle.
10 Switch off and disconnect the battery charger.
11 Enter campaign in the Warranty and Maintenance logbook.
Jan 13, 2026
Page 8 of 14
AfterSales
Service
Technical Information
2025
ENU
ASA3
9
Warranty processing
Information
The specified labor times were determined specifically for carrying out this campaign and include all
necessary preliminary work and rework. The labor times can differ from the labor time published in the Labor
Operation List in the PCSS.
Please be advised that due to the publication of WSJ0 Workshop Campaign – Update to software network
VR28.13, ASA3 is now obsolete, as the ASA3 update is contained in the VR28.13 software
Since ASA3 is a Recall, vehicles will not have the campaign auto-closed, but repair scopes 1 and 2 (no parts
replacement) will be reduced to 10TU, so the dealer is only paid for writing up the campaign completion. The
actual execution of the campaign is no longer necessary unless parts need to be replaced (scopes 3 through
10).
Scope 1:
Re-program reversing camera control unit
•
Campaign WSD0 already implemented
Labor time:
Re-program reversing camera control unit
Includes:
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 10 TU
Þ Damage number ASA3 099000 1
⇒
Scope 2:
Re-program reversing camera control unit
•
Campaign WSD0 open
Information
Programming of the reversing camera as part of the WSD0 campaign implementation (expansion to software
network VR28.11).
Labor time:
Re-program reversing camera control unit
Includes:
Re-program reversing camera control unit as part of campaign
WSD0
Labor time: 10 TU
Þ Damage number ASA3 099000 1
⇒
AfterSales
Jan 13, 2026
Page 9 of 14
9
Service
ASA3
Scope 3:
ENU
Technical Information
2025
Re-program reversing camera control unit and replace reversing camera
Labor time:
Re-program reversing camera control unit and replace reversing camera
Includes:
Replace reversing camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 230 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 4:
Re-program reversing camera control unit and replace reversing camera and front camera
Labor time:
Re-program reversing camera control unit and replace reversing camera and
front camera
Includes:
Replace reversing camera
Replace front camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 556 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 5:
Jan 13, 2026
Page 10 of 14
Re-program reversing camera control unit and replace reversing camera and camera on left side
AfterSales
Service
Technical Information
2025
ENU
ASA3
9
Labor time:
Re-program reversing camera control unit and replace reversing camera and
camera on left side
Includes:
Replace reversing camera
Replace left surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 271 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 6:
Re-program reversing camera control unit and replace reversing camera and camera on right side
Labor time:
Re-program reversing camera control unit and replace reversing camera and
camera on right side
Includes:
Replace reversing camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 271 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 7:
Re-program reversing camera control unit and replace reversing camera, front camera and camera on left
side
AfterSales
Jan 13, 2026
Page 11 of 14
9
Service
ASA3
ENU
Technical Information
2025
Labor time:
Re-program reversing camera control unit and replace reversing camera,
front camera and camera on left side
Includes:
Replace reversing camera
Replace front camera
Replace left surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 597 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
2 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 8:
Re-program reversing camera control unit and replacing reversing camera, front camera and camera on
right side
Labor time:
Re-program reversing camera control unit and replacing reversing camera,
front camera and camera on right side
Includes:
Replace reversing camera
Replace front camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
2 piece(s)
Þ Damage number ASA3 099000 2
⇒
Jan 13, 2026
Page 12 of 14
AfterSales
Labor time: 597 TU
Service
Technical Information
Scope 9:
2025
ENU
ASA3
9
Re-program reversing camera control unit and replace reversing camera and camera on left and right side
Labor time:
Re-program reversing camera control unit and replace reversing camera,
front camera and camera on left and right side
Includes:
Replace reversing camera
Replace left surround view camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 312 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
2 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 10:
Re-program reversing camera control unit and replace reversing camera, front camera and camera on left
and right side
Labor time:
Replace reversing camera, front surround view camera, replace left and right
surround view camera and re-program reversing camera control unit
Includes:
Replace reversing camera
Replace front camera
Replace left surround view camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 639 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
3 piece(s)
⇒ Damage number ASA3 099000 2
AfterSales
Jan 13, 2026
Page 13 of 14
9
Service
ASA3
ENU
Technical Information
2025
Important Notice: Technical Bulletins issued by Porsche
Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are
written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in
order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and
may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins
are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester
are the ones that must be followed.
© 2026 Porsche Cars North America, Inc.
Jan 13, 2026
Page 14 of 14
AfterSales
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: No. ASA3
Replacement Service Bulletin Number:
MFR Communication Date: 2026-01-14
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.