GROUP

NUMBER

CAMPAIGN

26-01-003G

DATE

Technical Service Bulletin
SUBJECT:

MODEL(S)

JANUARY 2026

GV70 (JK1)
GV80 (JX1)
GV80 COUPE (JX1)

LOOSE WINDSHIELD GLASS GARNISH SEAL
(SERVICE CAMPAIGN T84G)

This TSB supersedes 25-01-077G to expand the ending production date for applicable GV70
(JK1) vehicles from 07/19/2025 to 08/20/2025.

 IMPORTANT
Retailers must perform this service campaign on all affected vehicles prior to retail delivery to a
guest and whenever an affected vehicle is in the shop for any maintenance or repair.
Access the “Vehicle Information” screen via WebDCS to identify open campaigns.
Description: Certain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose
windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install
new parts.

Applicable Vehicles (Certain):
Model Year

Model

Production Dates

2026

GV70 (JK1)

05/15/2025 – 08/20/2025

GV80 (JX1)

05/15/2025 – 07/19/2025

GV80 Coupe (JX1)

05/15/2025 – 07/18/2025

2025 - 2026

Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair

SUBJECT:

LOOSE WINDSHIELD GLASS GARNISH SEAL (SERVICE CAMPAIGN T84G)

Parts Information:
Model

Part Name

Part Number

GV70 (JK1)

GV80 &
GV80 Coupe
(JX1)

Figure

86130-AR400QQH
Garnish Assy –
Windshield
Glass Kit
86130-T6400QQH

NOTE: 1 kit contains both garnishes for each side.

Warranty Information:
Model

Op. Code

GV80 &
GV80 Coupe
(JX1)

50D222R1

GV70 (JK1)

50D222R2

Operation

Windshield Glass
Garnish Replacement
(Both Sides)

Op. Time

Causal Part

Nature
Code

Cause
Code

B31

ZZ7

86130-T6000
0.3 M/H
86130-AR000

NOTE 1: Submit claim on Claim Entry Screen as “Campaign” type.
NOTE 2: If a part is found in need of replacement while performing this campaign and the affected
part is still under warranty, submit a separate claim using the same repair order. If the affected part is
out of warranty, submit a Prior Approval request for goodwill consideration prior to performing the
work.
NOTE 3: This TSB includes repair validation photos. Op times include VIN, mileage, and repair
validation photo(s) as outlined in the Digital Documentation Policy.
NOTE 4: The incident parts are subject to callback through the normal Warranty Technical Center
(WTC) parts return process. Claim is subject to debit if the part is not returned.

TSB #: 26-01-003G

Page 2 of 6
SUBJECT:

SUBJECT:

LOOSE WINDSHIELD GLASS GARNISH SEAL (SERVICE CAMPAIGN T84G)

Service Procedure:

DIGITAL DOCUMENTATION
This TSB includes repair validation photos. Refer to the latest Warranty Digital Documentation
Policy for requirements.

1.

Lift the windshield glass garnish (A) to
separate the clips, starting at the top of the
windshield (B). Continue lifting the garnish
towards the bottom of the windshield (C).

i

B

Information

A

Refer to the link or QR code below for a
demonstration of removal and installation
of the windshield glass garnish:
GV70/GV80 Windshield Glass Garnish
Replacement Demonstration

C

TSB #: 26-01-003G

Page 3 of 6
SUBJECT:

SUBJECT:

2.

LOOSE WINDSHIELD GLASS GARNISH SEAL (SERVICE CAMPAIGN T84G)

Push the lower end of the garnish downward to
separate it from the cowl top cover and remove
it from the vehicle.

A

PUSH
DOWN

i

Information

Ensure that the locking tab (D) at the
bottom of the garnish is fully
disconnected before removing the
garnish from the vehicle.
D

TSB #: 26-01-003G

Page 4 of 6
SUBJECT:

SUBJECT:

3.

LOOSE WINDSHIELD GLASS GARNISH SEAL (SERVICE CAMPAIGN T84G)

Install the new windshield glass garnish in the
reverse order of removal.

CORRECT

Refer to the photos for examples of correct and
incorrect installation:
•

CORRECT: Lower end of garnish is
inserted between the cowl top cover and
fender panel.

•

INCORRECT: Lower end of garnish is
NOT inserted between the cowl top cover
and fender panel.

INCORRECT

4.

Press down firmly on the entire garnish to
ensure all clips are fully secured.

5.

Remove any assembly protection film.

TSB #: 26-01-003G

Page 5 of 6
SUBJECT:

SUBJECT:

6.

LOOSE WINDSHIELD GLASS GARNISH SEAL (SERVICE CAMPAIGN T84G)

DIGITAL
DOCUMENTATION

Using the STUI camera function, take a
photo of the new windshield glass
garnish installed on the vehicle.
Upload the photo to STUI.
NOTE: If the STUI camera function is
NOT used, write the last 6 digits of the
VIN and date of repair on a piece of
paper to include in the photo.

7.

Repeat steps 1-6 on the opposite side.

8.

The service procedure is now complete.

TSB #: 26-01-003G

Page 6 of 6
SUBJECT: