NHTSA ID Number: 11028215
Manufacturer Communication Number: 2080372/1
TSB/Document Date: 2026-02-04
Summary
Window Drop Glass Operation | Continental
GT/GTC | 25-26MY. Condition: • Incorrect operation / function of the front and / or rear window drop glass • Front and / or rear drop glass fails to open / close or attempts to close and re-opens once contact has been made between the glass and applicable seal • DTC for window regulator motor no basic setting B148754 evident within any of the 4 window control modules (diagnostic address 42, 52, BB and BC) for loss of basic settings
50mm from rear edge of the front door glass
8.5mm ± 1mm
Interlock Point 5
(Roof up)
50mm from corner
11mm ± 1mm
Interlock Point 5
(Roof down)
50mm from top of glass
11mm ± 1mm
Interlock Point 6
(Roof up & down)
50mm from corner
11mm ± 1mm
Interlock Point 7
50mm behind rear div bar
8.5mm ± 1mm
Interlock Point 8
100mm from corner
8.5mm – 16mm
Profile Point 1
50mm in front of front div bar
10mm ± 1mm
Profile Point 2
50mm in front of front div bar
14mm ± 2mm
Profile Point 3
(Roof up)
50mm from upper corner
+0 mm / – 3 mm
Profile Point 3
(Roof down)
50mm from upper corner
+0 mm / – 3 mm
Profile Point 4
50mm from lower corner
+0 mm / – 3 mm
Point A
100mm behind front div bar
5mm ± 1mm
Point B
100mm infront of rear div bar
5mm ± 1mm
Point C
100mm behind rear div bar
5mm ± 2mm
Record all measured results as per the table below and
attach to existing Technical DISS query if required.
Before adjustment
After adjustment
In/Out of specification (Tick/Cross)
WINDOW ENTRY INTO CANT RAIL/ROOF SEAL
Windows should enter cant rail seal smoothly,
making contact with green area.
Too far inboard increases the risk of the cant rail
seal pinching, too far outboard will clash with
cant rail brightware (red squares)
For the front door, poor door profile point is a
major contributing factor here and should be
checked/adjusted if window found to be entering
seal incorrectly.
If this is not correct, it will cause the window to
bounce back causing a loss of basic settings.
Front Window example showing
correct operation
INTERNAL
Retailer Glass Measurement
Procedure for GT
BY634
For measurement specifications refer only to the
information in this TPI, refer to ElsaPro for all
adjustment instructions as required.
INTERNAL
INTERLOCK POINT 1
The steel rule shown in the images is for reference purposes
only. To avoid potential damage to vehicle surfaces, it is
recommended to use a plastic rule when performing
measurements or alignments.
From block to bright ware for all interlock points
Specification
7.5mm ± 1mm
(Interlock Tool WT10549/1)
If the measurement is out of
specification refer to ElsaPro
Repair Group 64 ‘Front door
quarter glass – To adjust’
Place block 50mm in
front of front div bar
INTERNAL
Record measurement for
all interlock points
INTERLOCK POINTS 2, 3, 4
4
Specification
8mm ± 1mm
(Interlock Tool WT10549
If the measurement is
out of specification
refer to ElsaPro
Place block 150mm
behind corner of
front div bar
INTERNAL
Place block 50mm
in front of rear div
bar
Place block 50mm
to rear of rear div
bar
Repair Group 64 ‘Slide
glass checking and
adjusting’
)
INTERLOCK POINT 5
Do not use a Steel Rule against the div bar to measure, use a plastic vernier/rule
5
Specification
11mm ± 1mm
(Ruler/vernier )
If the measurement is
out of specification refer
to ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
50mm from seal
INTERNAL
Record measurement
INTERLOCK POINT 6
6
Specification
8mm ± 1mm
(Interlock Tool WT10549/1
If the measurement is
out of specification
refer to ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
Place block 50mm from
corner point of bright ware
INTERNAL
Record measurement for all
interlock points
)
INTERLOCK POINT 7
Do not use a Steel Rule against the div bar to measure, use a plastic vernier/rule
7
Specification
11mm ± 1mm
(Ruler/vernier )
If the measurement is
out of specification refer
to ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
50mm from seal
INTERNAL
Record measurement
PROFILE POINT 1
Specification
10mm ± 1mm
(Profile Tool WT10549/2
If the measurement is
out of specification refer
to ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
50mm in front of front div
bar
INTERNAL
Flat against glass to
brightware
)
PROFILE POINT 2, 3, 4
4
Flat against glass to
brightware
Specification
10mm ± 2mm
(Profile Tool WT10549/2
50mm behind front
div bar
INTERNAL
50mm in front of
rear div bar
50mm behind
rear div bar
If the measurement is out
of specification refer to
ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
)
PROFILE POINT 5
5
Flat against glass to
brightware
Specification
10mm ± 2mm
(Profile Tool WT10549/2
)
If the measurement is out
of specification refer to
ElsaPro
Repair Group 64 ‘Slide glass
checking and adjusting’
50mm from corner
point of bright ware
INTERNAL
Flat against glass to
brightware
PROFILE POINT 6
67
A
✓
Specification
Point A tool against glass is +2mm
Allowable up to 3mm refer to Point B
(Profile Tool WT10549/2)
Front
50mm
B
50mm from upper corner
INTERNAL
Flat against front
window, measure gap
If the measurement is out of
specification refer to ElsaPro
Repair Group 64 ‘Slide glass
checking and adjusting’
PROFILE POINT 7
7
A
✓
Specification
Point A tool against glass = +2mm
Allowable up to 3mm refer to Point B
(Profile Tool WT10549/2)
Front
50mm
B
50mm from lower corner
INTERNAL
Flat against front
window, measure gap
If the measurement is out
of specification refer to
ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
WAIST SEAL MEASUREMENT POINT A
Specification
(A.1) 100mm from corner
(A.2) 5mm ± 1mm
(Ruler)
A.1
A.2
Mark on tape 100mm
from div bar (A.1)
INTERNAL
Measure from first lip rubber
seal to window glass (A.2)
If the measurement is
out of specification
refer to ElsaPro
Repair Group 64 ‘Slide
glass checking and
adjusting’
WAIST SEAL MEASUREMENT POINT B
B.2
Specification
(B.1) 100mm from corner
(B.2) 5mm ± 1mm
(Ruler)
If the measurement is out of
specification refer to ElsaPro
B.1
Repair Group 64 ‘Slide glass
checking and adjusting’
See image below, for OK and NOK after
adjustment/checking
NOK
OK
Mark on tape 100mm from
div bar (B.1)
INTERNAL
Measure from first lip rubber
seal to window glass (B.2)
WAIST SEAL MEASUREMENT POINT C
Specification
(C.1) 100mm from corner
(C.2) 5mm ± 2mm
(Ruler)
C.1
C.2
If the measurement is out of
specification refer to ElsaPro
Repair Group 64 ‘Slide glass
checking and adjusting’
Mark on tape 100mm
from div bar (C.1)
INTERNAL
Measure seal to
window gap (C.2)
Record all measured results as per the table below and
attach to existing Technical DISS query if required.
RECORDED MEASUREMENTS
Point
Interlock
Waist
Seal
INTERNAL
Specification
Interlock Point 1
50mm in front of front div bar
7.5mm ± 1mm
Interlock Point 2
150mm behind corner of front div bar
8mm ± 1mm
Interlock Point 3
50mm in front of rear div bar
8mm ± 1mm
Interlock Point 4
50mm to rear of rear div bar
8mm ± 1mm
Interlock Point 5
50mm from seal
11mm ± 1mm
Interlock Point 6
Profile
Position
50mm from corner point of bright ware
8mm ± 1mm
Interlock Point 7
50mm from seal
11mm ± 1mm
Profile Point 1
50mm in front of front div bar
10mm ± 1mm
Profile Point 2
50mm behind front div bar
10mm ± 2mm
Profile Point 3
50mm in front of rear div bar
10mm ± 2mm
Profile Point 4
50mm behind rear div bar
10mm ± 2mm
Profile Point 5
50mm from corner point of bright ware
10mm ± 2mm
Profile Point 6
50mm from upper corner
+0 mm / – 3 mm
Profile Point 7
50mm from lower corner
+0 mm / – 3 mm
Point A
100mm behind front div bar
5mm ± 1mm
Point B
100mm infront of rear div bar
5mm ± 1mm
Point C
100mm behind rear div bar
5mm ± 2mm
Before adjustment
After adjustment
In/Out of specification (Tick/Cross)
WINDOW ENTRY INTO CANT RAIL/ROOF SEAL
Windows should enter cant rail seal smoothly,
making contact with green area.
Too far inboard increases the risk of the cant rail
seal pinching, too far outboard will clash with
cant rail brightware (red squares)
For the front door, poor door profile point is a
major contributing factor here and should be
checked/adjusted if window found to be entering
seal incorrectly.
If this is not correct, it will cause the window to
bounce back causing a loss of basic settings.
Front Window example showing
correct operation
INTERNAL
- RESIDUE FREE: The Invisible Glass CLEAR DRY formula contains...
- AMMONIA-FREE: This unique formula contains no ammonia, so...
- CONVENIENT SPRAY BOTTLE: This 22-Ounce trigger spray bottle...
- SURFACES: Easily remove dirt, pet slobber, grease...
- MADE IN USA: Proudly American-made, you can trust the...
- Precision Glass Polishing: This cerium oxide-based formula...
- Crystal Clear Vision: Revive dull, foggy, or tarnished glass...
- Minimal Effort Maximum Results: Designed for gearheads who...
- Pro Level Application: Formulated for long open time, giving...
- Perfect Prep Step: Ideal for prepping glass before applying...
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2080372/1
Replacement Service Bulletin Number:
MFR Communication Date: 2026-01-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE:BODY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.