SC-26-78-01
Title: Mirror Cap Replacement
Applicability: Revero GT and GTS, GS-6, MY25 Revero
Market Region: All

Type: Communication
Year: 2026
System: Exterior Fitting (78)
Sequence: 01

PRIORITY: See provided list
PURPOSE: A supplemental instruction to remove the mirror caps

In order to aid service centers in repair of the mirror caps or
replacement when a carbon fiber or other color is desired.
The mirror cap can be removed while on the vehicle, removal
of the mirror assembly is not necessary.
The mirror in this guide was placed on a work bench for clarity.
It may help to move the mirror glass with your hands to open
the gap to the housing.

Using a plastic panel tool (Fig. 1) insert into one side of the mirror, and pry one corner or side outwards (Fig 2). This may take
some gentle yet controlled force. To aid in removal of the glass
frame out walk the tool, or fingers, around the mirror, applying
some pressure. Pulling too hard on the outside area of the mirror
is more likely result in breaking glass, start from the side closest to
the vehicle.

Fig. 1

Fig. 2

Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.

Page 1 of 6

Published: January 2026

SC-26-78-01
Title: Mirror Cap Replacement
Applicability: Revero GT and GTS, GS-6, MY25 Revero
Market Region: All

Type: Communication
Year: 2026
System: Exterior Fitting (78)
Sequence: 01

Once the mirror glass is loose, carefully lower it to
expose the connectors(Fig.3) and disconnect those
from the glass; two connectors on the glass backing
and one white connector (Fig 4).

Fig. 3

Fig. 4

With the mirror glass removed, undo the screws for the surround housing (4, T20 screws reassembly
torque is 1.5Nm). This will provide easier access to the scalp clips, to remove and replace.

Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.

Page 2 of 6

Published: January 2026

SC-26-78-01
Title: Mirror Cap Replacement
Applicability: Revero GT and GTS, GS-6, MY25 Revero
Market Region: All

Type: Communication
Year: 2026
System: Exterior Fitting (78)
Sequence: 01

Four screw locations (Fig. 5).

Fig. 5

The scalp’s clip locations can be seen
(Fig.6).
Use a small tool to help un-clip from the
housing.

Fig. 6

Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.

Page 3 of 6

Published: January 2026

SC-26-78-01
Title: Mirror Cap Replacement
Applicability: Revero GT and GTS, GS-6, MY25 Revero
Market Region: All

Type: Communication
Year: 2026
System: Exterior Fitting (78)
Sequence: 01

Replace the mirror caps with the new replacement parts. Line up the scalp tabs to the mirror
sub-assembly surround snap features. An audible “snap” is heard when both parts are fully engaged.
Check the gap consistency to the frame for confirmation of proper installation (fig 7 and fig 8).

Fig. 7

Fig. 8

Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.

Page 4 of 6

Published: January 2026

SC-26-78-01
Title: Mirror Cap Replacement
Applicability: Revero GT and GTS, GS-6, MY25 Revero
Market Region: All

Type: Communication
Year: 2026
System: Exterior Fitting (78)
Sequence: 01

When the scalp replacement is complete and mirror
glass is reinstalled, confirm correct operation of the
mirror. Mirror controls for both sides are located in
touch panel, accessed by the left side mirror symbol
(Fig.9).

Fig. 9

The control page will open for adjustments (Fig. 10).
Test the mirror movements on the virtual control
pads, and he self close function action by pressing in
the center symbol indicated here by the arrow.

Fig. 10

Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.

Page 5 of 6

Published: January 2026

SC-26-78-01
Type: Communication
Year: 2026
System: Exterior Fitting (78)
Sequence: 01

Title: Mirror Cap Replacement
Applicability: Revero GT and GTS, GS-6, MY25 Revero
Market Region: All
PARTS REQUIRED:
PART NUMBER
N/A

DESCRIPTION
N/A

QUANTITY
N/A

Please contact the parts department ([email protected]) and order this part by email if
not available in on-line at time of repair.
SHOP SUPPLIES:
DESCRIPTION

N/A
SPECIAL TOOLS:

DESCRIPTION
N/A
CAUSAL PART: (use one of the parts for the complaint)
PART NUMBER
C131166101901WD

DESCRIPTION
Scalp - Body Color Mirror Shell Cover LH

LABOR CODES: (use one appropriate for the part(s) replaced)
CODE
DESCRIPTION
TIME

DEFECT CODE

78-40-01-20

Mirror cap replacement both

0.8

78-40-01-17

78-40-01-18

Mirror cap replacement LH

0.4

78-40-01-15

78-40-02-18

Mirror cap replacement RH

0.4

78-40-02-16

SUBLET:
CODE
N/A

DESCRIPTION

AMOUNT

WARRANTY DISPOSITION: This repair is covered under the New Vehicle Limited Warranty, in effect
for four (4) years from the in-service date or 50,000 miles for Model Year 2025 Revero

Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.

Page 6 of 6

Published: January 2026