NHTSA ID Number: 11027287
Manufacturer Communication Number: TS45-FC-2518
TSB/Document Date: 2026-01-07
Summary
Tag Axle Sensor Pinout
SERVICE BULLETIN
Subject: TS45 Pressure Sensor Pinout
Changing Bulletin
Bulletin Type: Field Fix Conditional
Bulletin No: TS45-FC-2518
PQR No: 500000007970
Rev No:00
Ref. No: 700004824
Vehicle Model: TS45
Flat Rate Time / Code: 70 min
Date of issue: 10.10.2025
Modify Before: 10.10.2028
What to do with off coming parts:
What to do with outstanding parts of previous
revision:
☒Scrap
☐Return
☐Use with additional parts
☐On consignment
☐No off coming parts
☐Scrap
☒Return
☐Use with additional parts
☐On consignment
☐No outstanding parts
Description of the modification:
This bulletin aims to check and solve sensor
HD128135 issue.
Bulletin Responsible: Ahmet Altın, Veli Sami Acar
Published & Approved By: Esin Arısoy
SERVICE BULLETIN
SAFETY INSTRUCTIONS
1. Mechanical Requested Dress Code
WARNING:
➢ Dress properly to avoid personal injury and damage to the
vehicle
Always wear protective clothing
Do not wear any worn or loose-fitting clothing
Remove jewelry before starting to work
In case of long hair, use hairnet
The illustration on the left shows some of the correct and
incorrect clothing
✓ Sharp edged items should be avoided in order not to
scratch vehicle (i.e. belts, watches, necklace)
✓
✓
✓
✓
✓
2. Protect Seats when Mechanic Starts Working
✓ Seats, trimming, upholstery stuff and carpeting should be
protected with appropriate coverings.
3. Welding on the Chassis
a. Always disconnect the batteries (starting with the negative lead).
b. Disconnect the connectors of electrical and electronic equipment (electronic control
units, sensors and actuators) if they are less than 2 meters away from the chassis
part to be welded or the earth terminal of the welding equipment.
c. The earth terminal should never be attached to vehicle components such as engine,
axles and springs. Arcing on these parts is not permitted, because of the risk of
damage to bearings, springs, etc.
d. The earth terminal must make good contact and be placed as close as possible to
the part to be welded.
e. Plastic pipes, rubber parts and parabolic springs should be well protected against
welding spatter and temperatures higher than 70°.
f. The contact switch must not be in the accessory or contact position. The contact key
should be removed.
g. Reconnect in reversed order of disconnecting. Ensure that a good earth connection
is made between chassis, engine and cab.
SERVICE BULLETIN
INCLUDING PART LIST
PART NUMBER
9402-105Y
PART DESCRIPTION
T-FEMALE 0,5-1,0 mm2
QTY
SYMBOL
3
This part has been added in case the terminal is damaged when removing the cables from it.
SERVICE BULLETIN
APPLICATION STEPS
HARDWARE (INSTALLATION) APPLICATION
Sensor Position Images
SERVICE BULLETIN
Sensor
SERVICE BULLETIN
1-) Unplug the socket Temsa
numbered P10B022-1.
SERVICE BULLETIN
Pin1
Pin2
Pin3
2) Carefully disconnect cable numbered 08N001(5V)-85-16 from pin 2 of the socket.
Pin 2
SERVICE BULLETIN
3) Carefully disconnect cable numbered 10B022(82)-1 from pin 3 of the socket.
Pin 3
4) Connect cable numbered 08N001(5V)-85-16 to the third pin of the socket.
Pin 3
SERVICE BULLETIN
5) Connect cable numbered 10B022(82)-1 to the second pin of the socket.
Pin 2
6) Plug the socket back into position.
SERVICE BULLETIN
Note: If the terminals are damaged when disconnecting the cable from the socket, cut the
terminals from the cable. Insert terminal numbered 9402-105Y into the cable.
SERVICE BULLETIN
SOFTWARE APPLICATION
The program Links
ZR5 :
** TS04-LC3-002 software should be installed on vehicles with software starting with
TS04-LC3-... or TS02-
LC3-…
https://content.temsa.com/sapcs?get&pVersion=0045&contRep=ZADNSPEKTEP07101&docId=0050568FD8291FE0A8
ED5EC2C59CC4B4&accessMode=r&compId=TS04-LC3-002.zip
** TS05-LC3-003 software should be installed on vehicles with software starting with
TS05-LC3-... or TS03-
LC3-…
https://content.temsa.com/sapcs?get&pVersion=0045&contRep=ZADNSPEKTEP07101&docId=0050568FD8291FE0A8
EACF1DC0D524B4&accessMode=r&compId=TS05-LC3-003.zip
Multiviu :
**TS02-MV-010 software should be installed on vehicles with software starting with TS02-MV-…
https://content.temsa.com/sapcs?get&pVersion=0045&contRep=ZADNSPEKTEP07101&docId=0050568F725E1FE0A8E
F251D708BA4BD&accessMode=r&compId=TS02-MV-010.zip
**TS00-MV3-004 software should be installed on vehicles with software starting with TS00-MV3-…
https://content.temsa.com/sapcs?get&pVersion=0045&contRep=ZADNSPEKTEP07101&docId=0050568FD8291FE0A8
E965392840A4B4&accessMode=r&compId=TS00-MV3-004.zip
For Multiviu Setup file link : Setup_MVP12_GC_patch_Display.zip
Important Note: -Please read the instructions carefully before installing the software-The software mentioned above are up to date software. If there is previously published bullettin for these
vehicles, please refer to this bullettin and install these software.
-It is essential to install the “Setup_MVP12_GC_patch_Display.exe” file prior to installing the Multivui
software.
-Before downloading the ZR5 software; you have to check, which program variant is installed on the
vehicle. If “TS04-LC3-... or TS02-LC3-…” is installed then you should download “TS04-LC3-002”.
If “TS05-LC3-... or TS03-LC3-…” is installed then you should download “TS05-LC3-003”
-To download ZR5 Kibes software, your computer must have Logicad3.014.2
-To be online for option page on ZR5 software, you can connect 1000Kbaud rate
-Please note option selections before installing ZR5 software. If the options are reset, after installing,
reselect the same options.
-To download TS02-MV-… software, your computer must have Logi.CAD58
-To download TS00-MV3-… software, your computer must have Logicad3.009.4
SERVICE BULLETIN
Uploading the up-to-date program(ZR5):
1- Park the vehicle to an area which is proper to work.
2- To install the ZR5 software, locate the KIBES socket next to the OBD socket by looking at the label on
the cover.
SERVICE BULLETIN
3- Connect one end of the KIBES cable to the CANanalyzer or Peak cable and the other end to the KIBES
diagnostic socket. Connect the CANanalyzer or Peak output to the computer. Make sure that the KIBES
dongle is inserted to your computer.
SERVICE BULLETIN
SERVICE BULLETIN
4- Install the ZR5 software on the vehicle as described in the images. Turn the ignition switch on. Do not
start the engine.
SERVICE BULLETIN
Hint: The software version must be selected correctly. The number shown in the picture may be
representative.
SERVICE BULLETIN
SERVICE BULLETIN
4.1- Click "Preferences" to check the Baudrate and port. (for TS Coachs it is updated from
250k to 1000k)
SERVICE BULLETIN
4.2- Click on the instructions shown in order in the picture.
1.click here
2.click
here
3.click
here
4.3- If you get an error when you start loading of software, try CV flash download.
SERVICE BULLETIN
2.Then click here. Start arrow will be
green If the selected port is true.
1.click
here
SERVICE BULLETIN
Installing the setup for the Multiviu:
SERVICE BULLETIN
Uploading the up-to-date program (Multiviu):
1-Park the vehicle to an area which is proper to work.
2-Connect your computer to the vehicle by using the CANalyzer interface. Plug the USB part into your
computer and connect your CAN cable to the 9 pinned OBD port with the D pin low and the C pin high.
D
C
SERVICE BULLETIN
3- Turn the ignition switch on. Do not start the engine.
4- Make sure that the KIBES dongle is inserted to your computer.
SERVICE BULLETIN
**TS02-MV-010 software should be installed on vehicles with software starting with TS02-MV-…
To install this software use logiCAD58.exe
5- Select the “Open Project” selection and click “next”.
SERVICE BULLETIN
Make sure that
right program is
choosen.
SERVICE BULLETIN
6- Right click on Mulviu then click “Communication Settings” check the Port and Baudrate.
You can change port
here. Please make
sure correct port.
You can change
“Start Baudrate”
here
You can change
“Download
Baudrate” here
SERVICE BULLETIN
7- Then Right click on Mulviu, Download the logic side of the program.
SERVICE BULLETIN
8-Right click on Mulviu again then click “Archive Download”
SERVICE BULLETIN
9- You should find program in your workspace then double click the program.
SERVICE BULLETIN
SERVICE BULLETIN
10- Click on “MRT” then click “Open”.
Make sure you choose the right program here!
SERVICE BULLETIN
11- After the software is checked, click the “Build New Archive”, then click the “Archive Download”.
SERVICE BULLETIN
**TS00-MV3-004 software should be installed on vehicles with software starting with
To install this software use logiCAD 3 (3.009.4)
TS00-MV3-…
SERVICE BULLETIN
Hint: The software version must be selected correctly. The number shown in the picture may be
representative.
SERVICE BULLETIN
SERVICE BULLETIN
- Click "Preferences" to check the Baudrate and port. (for TS Coachs it is updated from
250k to 1000k)
SERVICE BULLETIN
Open CV flash download.
SERVICE BULLETIN
1.click
here
2.Then click here. Start arrow will be
green If the selected port is true.
After SW.bin is installed, you can start by selecting .sh then again click Start button.
SERVICE BULLETIN
12-When a warning occurs, click OK, then wait for the program to be downloaded. Do not cut the
power off during the download process, this could cause the body controller to dysfunction .
LABOR BREAKDOWN
Application
Time
Changing pinout of the pressure sensor
20'
Installing ZR5 Kibes Program
5’
Installing Multiviu Program
5’
Archive Installing of Multiviu
40’
Total Labor Time
70’
SERVICE BULLETIN
AFFECTED VEHICLE LIST
No
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
36.
37.
38.
39.
40.
41.
42.
43.
Otpa No
OA16975
OA16974
OA16973
OA16972
OA16900
OA16899
OA16785
OA17002
OA17001
OA16979
OA16978
OA16977
OA16976
OA17100
OA17038
OA17035
OA17034
OA17033
OA17003
OA17102
OA17101
OA17214
OA17213
OA17199
OA17198
OA17176
OA17175
OA17155
OA17126
OA17125
OA17285
OA17284
OA17283
OA17282
OA17369
OA17368
OA17367
OA17366
OA17365
OA17364
OA17363
OA17362
Model
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
TS45
Chassis No
Country
NLTEJXA92P1000396
USA
NLTEJXA90P1000395
USA
NLTEJXA99P1000394
USA
NLTEJXA91P1000423
USA
NLTEJXA97P1000393
USA
NLTEJXA95P1000392
USA
NLTEJXA98P1000385
USA
NLTEJXA94P1000402
USA
NLTEJXA92P1000401
USA
NLTEJXA90P1000400
USA
NLTEJXA98P1000399
USA
NLTEJXA96P1000398
USA
NLTEJXA94P1000397
USA
NLTEJXA91P1000406
USA
NLTEJXA9XP1000405
USA
NLTEJXA98P1000404
USA
NLTEJXA96P1000403
USA
NLTEJXA96P1000434
USA
NLTEJXA94P1000433
USA
NLTEJXA95P1000408
USA
NLTEJXA93P1000407
USA
NLTEJXA96P1000417
USA
NLTEJXA94P1000416
USA
NLTEJXA92P1000415
USA
NLTEJXA90P1000414
USA
NLTEJXA99P1000413
USA
NLTEJXA97P1000412
USA
NLTEJXA95P1000411
USA
NLTEJXA93P1000410
USA
NLTEJXA97P1000409
USA
NLTEJXA94R1000421
USA
NLTEJXA92R1000420
USA
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TS45-FC-2518
Replacement Service Bulletin Number:
MFR Communication Date: 2025-12-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.