NHTSA ID Number: 11027050
Manufacturer Communication Number: 25-01-080G-1 TSB
TSB/Document Date: 2026-01-06
Summary
Certain GV70 (JK1) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
GROUP
NUMBER
CAMPAIGN
25-01-080G-1
DATE
Technical Service Bulletin
MODEL(S)
DECEMBER 2025
GV70 (JK1)
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN L02G)
SUBJECT:
This TSB supersedes 25-01-080G to revise the Configuration of Ethernet Communication
on Tablet procedure on page 4.
IMPORTANT
Retailers must perform this field action on all affected vehicles within 5 / 60,000 New Vehicle Limited
Warranty (NVLW) prior to retail delivery to a guest and whenever an affected vehicle is in the shop
for any maintenance or repair. See Warranty Information section for more details.
Access the “Vehicle Information” screen via WebDCS to verify “Warranty Start Date” and ensure the
vehicle is within NVLW, observing mileage prior to any repair work.
Description: Certain GV70 (JK1) vehicles may exhibit a Data Communication Unit (DCU) software
error due to the internal timer initialization logic not being implemented. The DCU module may shut
down telematics services after one year. This bulletin provides instructions to perform a software update
for the DCU module.
Applicable Vehicles:
Model Year
Model
2026
GV70 (JK1)
Production Dates
02/18/2025 – 09/10/2025
SST Information:
Tool Name
Tool Number
VCI 3
G0VPNNN006
19-Pin Cable
Figure
Remarks
+
VCI 3 comes with
the 19-pin cable
(P/N G1XDDCA020
included here
for reference)
G1XDDCA020
Ordering Information
Website:
https://genesisessentialtools.com/
Email:
[email protected]
VCI 2
Ethernet
Communication
Interface (ECI)
Kit
G1XDDMN002
+
G0XDDMN052
If using VCI 2, the
ECI Kit will be
required to
complete software
updates.
Phone: 1-855-763-6630
Hours: 7 AM – 7 PM CST
NOTE: VCI 2 can NO longer be ordered but can be used for the updates in this TSB.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L02G )
GDS Information:
Model
System
Event Number*
Description
GV70 (JK1)
DCU
1312
JK1 PE DCU LOGIC IMPROVEMENT (NA)
(*or use a later available event as listed in the GDS DCU Update screen if one is available.)
NOTE: The software update is subject to an OTA (Over-the-Air) option and may be completed by
customers with active Genesis
Connected Services subscriptions.
Warranty Information:
Model
Op. Code
Operation
GV70 (JK1)
50D280R0
Op.
Time
DCU Software Update 0.4 M/H
Causal Part
Nature
Code
Cause
Code
96510-ARNA0
M73
ZZ3
NOTE 1: Submit claim on Claim Entry Screen as “Campaign” type.
NOTE 2: 5 / 60,000 New Vehicle Limited Warranty (NVLW) applies to the part(s) and repair
procedure(s) outlined in this TSB. Prior to beginning any repair work, ensure the part(s) associated
with the repair procedure are within NVLW, observing mileage and Warranty Start Date or date of first
use. If the subject part(s) are out of warranty coverage, the retailer has the option to submit a PA
Request for goodwill consideration on a case-by-case basis.
NOTE 3: If any part(s) not subject to this TSB are found in need of replacement while performing the
repair procedure, and the affected part(s) are still under warranty, the retailer may submit a separate
claim using the same repair order. If the part(s) not subject to this TSB are out of warranty coverage,
the retailer has the option to submit a PA Request for goodwill consideration on a case-by-case basis.
NOTE 4: This TSB includes repair validation photos. Op times include VIN, mileage, and photo
capture of the ECU Update “Success” result screen as outlined in the Digital Documentation Policy.
ROM ID Information:
Model
Event
System
ECU
Part Number
ROM ID
Current
Latest
120.CA.011606.011606
GV70 (JK1)
1312
DCU
96510-ARNA0
120.CA.011870.011870
120.NA.012054.01205
120.CA.011951.011951
TSB #: 25-01-080G-1
Page 2 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L02G )
Service Procedure:
DIGITAL DOCUMENTATION
This TSB includes repair validation photos. Refer to the latest Warranty Digital Documentation
Policy for requirements.
NOTICE
Perform the GDS ECU update in Auto Mode.
•
If the ECU update fails in Auto Mode, perform the update in Manual Mode to recover.
NOTICE
Ensure the vehicle’s battery charge is above 11.0 Volts and the tablet’s battery charge is above
30% before performing a software update to avoid failure.
i
Information
•
Turn OFF all lamps (do NOT leave head lamp switch in auto mode) and accessories.
•
Perform update with the ignition switch in the ON position.
•
Do NOT disconnect any cables connected to the vehicle or scan tool during the update.
•
Do NOT start the engine during the update.
•
Do NOT turn OFF the ignition switch during the update.
TSB #: 25-01-080G-1
Page 3 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L02G )
Configuration of Ethernet Communication on Tablet
VCI 2 Connection (must use ECI kit with USB-C cable attachment):
1.
Connect the ECI DLC connector to the OBD
connector of the vehicle.
2.
Connect the VCI to the receiver module on the
ECI cable.
3.
Connect the ECI cable with the USB-C
connector cable attachment to the tablet.
VCI 3 Connection (use VCI 3 cable):
1.
Connect the 19-pin connector to the bottom of
the VCI 3.
2.
Connect the VCI to the OBD connector of the
vehicle.
3.
Connect the cable with the USB-C connector
to the tablet.
i
•
Information
If using VCI 2, please wait for the Wi-Fi Direct timer to complete to ensure the Wi-Fi Direct
connection is established. Do NOT select Bluetooth Only.
TSB #: 25-01-080G-1
Page 4 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L02G )
ECU Update Procedure
1.
Enter the following digits exactly as shown for
IP address, DNS address, Netmask and
Default gateway.
Save and close.
i
Information
Ensure the following IP settings on your
tablet matches the below before
proceeding with the software update.
2.
Perform the ECU update in Auto Mode.
i
Information
Refer to TSB # 24-GI-016G, “ECU
Update Procedure for Tablet-Based
Genesis Smart”, for additional
information.
TSB #: 25-01-080G-1
Page 5 of 8
SUBJECT:
3.
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L02G )
Verify the ROM ID by selecting the DCU
system to scan the vehicle’s current ROM ID.
NOTICE
Check the current ROM ID version and
compare it to the ROM ID Information
table before attempting to perform the
software update.
NOTICE
If the update fails, remove the power
connector from the in-cabin fuse box for
at least 5 seconds. Reassemble and
retry the update.
i
Information
The screenshots within this service
procedure refers to a GV70 Internal
Engine Combustion (ICE) vehicle from
Hyundai Motor Manufacturing Alabama
factory, but is also applicable to the GV70
ICE vehicle from Hyundai Motor
Company.
4.
Once the ECU update is 100% complete,
follow the prompts on the screen to cycle the
ignition OFF for at least 10 seconds to reset
the control unit (certain models may take up to
30 seconds).
i
Information
Use the Refresh button to reset the
timer.
TSB #: 25-01-080G-1
Page 6 of 8
SUBJECT:
5.
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
OTA initialization (A) should perform
automatically:
• If OTA initialization performs
automatically, then proceed with the
service procedure.
•
L02G )
A
If the OTA initialization process fails,
complete it manually under:
S/W Management > CCU_CCNF Central Communication Unit (CCNF)
> OTA Initialization (B).
Follow the instructions on the screen.
B
6.
DIGITAL
DOCUMENTATION
Using the tablet or GDS screen capture
function, take a screenshot of the ECU
Update “Success” result screen.
Upload the photo to STUI.
NOTE: The VIN/Date/Time/Mileage photo
imprint is NOT required for GDS
screenshots.
TSB #: 25-01-080G-1
Page 7 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
7.
Perform an All Systems Fault Code search
and erase DTC history that had incidentally
occurred from the ECU update.
8.
Start the engine to confirm proper operation of
the vehicle.
9.
The service procedure is now complete.
L02G )
NOTICE
If the ECU update fails in Auto Mode, perform the update in Manual Mode using the password(s)
below.
Manual Mode Password:
Event
EC U Menu
Password
1312
JK1 PE DCU 96510-ARNA0
2123
TSB #: 25-01-080G-1
Page 8 of 8
- [J2534 Pass-Thru Programmer] - TOPDON RLink J2534 is...
- [All-in-One OEM Reprogramming and Diagnostics] - When...
- [Tested, Trusted, and Proven for Accuracy] - TOPDON RLink...
- [One-Click Installation, Continuous Updates] - The exclusive...
- [Works with Windows Compatibility and OEM Software...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 25-01-080G-1 TSB
Replacement Service Bulletin Number:
MFR Communication Date: 2025-12-17
MFR Internal Campaign ID/Software Version: L02G
Communication Type: Service Campaign
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- OE ALL SYSTEM DIAGNOSE: Autel scanner MX808S can enter into in-depth system diagnosis and quickly spot problems inside the car. It can scan all systems found in today's cars to read generic DTCs, displays Live Data and performs active test etc.
- 3000+ ACTIVE TESTS: mx808s bidirectional It's enabling targeted tests on car subsystems to swiftly identify and resolve issues. Such as lights, headlamps, fuel Injector, mirrors, coolant fans, windows, wipers, EVAP, Inlet & Outlet Valve, etc.
- Auto Scan: Auto Scan technology automatically scan all available systems within clicks.
- 5X FASTER HARDWARE: Android 11.0( allows fast boot-up within seconds and multitasking, cover more new cars up to 2025/2026); Rockchip RK3566, boosts your speed of diagnostics; 4/64G, larger memory to handle more files data; 5G&2.4 GHz dual Wi-Fi, more stable; Enhanced OBD2 cable 2.0
- 150+ BRAND COVERAGE: MX808S auto scanner fits for 99% large-scale repair garages with its up-to-date vehicle coverage: 150+ brands, US Top Selling cars (1996-2026), 2018+ FCA
& 2015+ Renault SGW.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.
- 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.