NHTSA ID Number: 11025890
Manufacturer Communication Number: FL997-DLR LTR
TSB/Document Date: 2025-12-02
Summary
Revised Emission Recall for FCCC Clean Idle Label
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: FL997-DLR LTR
Replacement Service Bulletin Number:
MFR Communication Date: 2025-11-25
MFR Internal Campaign ID/Software Version: FL997
Communication Type: Emissions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
Emissions Recall: FCCC Clean Idle Label
Models Affected: Specific model years 2019-2024 Freightliner
Custom Chassis MT45
and MT55 van chassis, B2 106 school bus chassis, and EH High Cab/EL Low Cab
Econic chassis, manufactured June 24, 2019, through January 13, 2023.
Vehicles are powered by DD5® and DD8® engines, engine model years 2020-2021,
engines manufactured from July 1, 2019, to August 31, 2021.
General Information
REVISION: Some vehicles which previously had FL997-A completed have been moved to FL997-B. These
vehicles had a clean idle label installed in error and must have the label removed. See page 8 for FL997-B work
instructions.
2ND REVISION: Added inspection-only SRT.
Daimler Truck North America LLC (DTNA), on behalf of its wholly owned subsidiary Freightliner
Custom Chassis
Corporation (FCCC), has determined that an emissions-related defect exists on the vehicles mentioned above.
Certain vehicles received an incorrect Clean Idle label at the plant.
(See revision statement above.)
The existing Clean Idle label will be removed and replaced with a new Clean Idle label.
(See revision statement above.)
There are approximately 1,046 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a
vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns
before sale or delivery of a vehicle.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a
completion sticker (Form WAR260).
Replacement Clean Idle Labels
See page 9 for Clean Idle Label ordering instructions.
If our records show your dealership has ordered any vehicles involved in campaign number FL997, a list of the
customers and vehicle identification numbers will be available on the DTNA Portal via OWL. Please refer to this
list when ordering parts for this recall.
Table 1 - Replacement Parts for FL997 A
IMPORTANT: Do not order a label for vehicles in Group B.
If a vehicle in Group B has a Clean Idle Label affixed, it is to be removed and not replaced.
Campaign
Number
Part Number
Part Description
FL997 A
A 472 221 21 01
WAR260
COMPLETION STICKER
CLEAN IDLE LABEL
Table 1
Page 1
Qty.
Note
1 ea
1 ea
See ’Claims for Credit’ section on
page 2 for filing instructions.
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the
campaign has not been previously completed. Also, check for a completion sticker prior to beginning work.
U.S. and Canadian dealers, contact the Warranty Campaigns Department via WSC on the DTNA Portal if you have
any questions or need additional information. Export distributors, submit a WSC ticket or contact your International![]()
Service Manager.
U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a
Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC.
All kits must be in resalable condition. PAR requests must include the original purchase invoice number. Export
Distributors: Excess inventory may be returned as noted for U.S. and Canadian dealers. Export locations will pay
freight to return kits. Export Distributors: Excess inventory is not returnable.
The letter notifying U.S. and Canadian vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code,
Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you.
The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an
unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair
a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or
reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance
for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed.
Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage
manufacturer is required to forward this notice to its distributors and retail outlets within five working days.
Page 3
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A
Copy of Notice to Owners (Original, Group A)
Emissions Recall: FCCC Clean Idle Label
Your vehicle may be equipped with an incorrect Clean Idle label, which is regulated under applicable emission
regulations.
Daimler Truck North America LLC (DTNA), on behalf of its wholly owned subsidiary Freightliner
Custom Chassis
Corporation (FCCC), is initiating emissions recall FL997 involving certain FCCC chassis, powered by DD5® and
DD8® engines, engine model years 2020-2021, engines manufactured from July 1, 2019 to August 31, 2021.
Certain vehicles, as described above, received an incorrect Clean Idle label at the plant.
The existing Clean Idle label will be removed and replaced with a new Clean Idle label. The labels will need to be
ordered prior to your appointment and will be installed free of charge by Daimler Truck North America authorized
service facilities. Removal of the old label and affixing the new label will take approximately one half hour.
Please contact an authorized DTNA dealer to arrange to have the recall performed, and to ensure that the label
specific to your vehicle is ordered and available at the dealership, prior to your appointment. To locate a dealer,
search online at https://northamerica.daimlertruck.com/contact-us. Scroll down to ’Locate a Dealer’, and search
for a Freightliner
location. You may also confirm your vehicle’s involvement in this emissions recall at URL: https://
dtna-dlrinfo.prd.freightliner.com: 48518/VinLookup/vin-module/getVinLookupPage.
If you do not own the vehicle that corresponds to the identification number(s), which appears on the recall notification,
please return the notification to the Warranty Campaigns Department with any information you can furnish that will
assist us in locating the present owner. If you have leased this vehicle, federal law requires that you forward this
notice to the lessee within 10 days. If you are a subsequent stage manufacturer, federal law requires that you forward
this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition
corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice
for details.
If you have questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7 a.m.
to 4 p.m. Pacific Time, Monday through Friday, e-mail: [email protected]. For other concerns,
you may contact the Customer Assistance Center at (800) 385-4357.
We regret any inconvenience this action may cause, but feel certain you understand our interest in being compliant
with motor vehicle emissions regulations.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Page 4
Daimler Truck
North America LLC
Recall Campaign
January 2025
FL997 B
Copy of Notice to Owners (New, Group B)
Emissions Recall: FCCC Clean Idle Label
IMPORTANT: This is an update to emissions recall FL997.
Upon review, it has been determined that your vehicle should not have been included in the FL997 population. If
your vehicle had a Clean Idle Label installed it must be removed so the truck is once again compliant with
applicable emission regulations.
If our records show your vehicle has not yet had the FL997 recall campaign performed, and no Clean Idle Label
was installed, then the recall campaign has been closed for your vehicle and no further action is necessary. If
our records are incorrect, please proceed as stated in the next paragraph.
Please contact an authorized DTNA dealer to have the Clean Idle Label removed. To locate a dealer, search online
at https://northamerica.daimlertruck.com/contact-us. Scroll down to ’Locate a Dealer’ and search for a
Freightliner
location.
If you do not own the vehicle that corresponds to the identification number(s), which appears on the recall
notification, please return the notification to the Warranty Campaigns Department with any information you can
furnish that will assist us in locating the present owner. If you have leased this vehicle, federal law requires that you
forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, federal law requires
that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have
this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the
reverse side of this notice for details.
If you have questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7 a.m. to 4 p.m. Pacific Time, Monday through Friday, e-mail: [email protected]. For other
concerns, you may contact the Customer Assistance Center at (800) 385-4357.
We regret any inconvenience this action may cause but feel certain you understand our interest in being compliant
with motor vehicle emissions regulations.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Page 5
Daimler Truck
North America LLC
Recall Campaign
January 2025
FL997 A
Reimbursement to Customers for Repairs
Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the
repair would have cost if completed by an authorized Daimler Truck North America LLC dealer. The following
documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
• The name and address of the person who paid for the repair
• The Vehicle Identification Number (VIN) of the vehicle that was repaired
• What problem occurred, what repair was done, when the repair was done
• Who repaired the vehicle
• The total cost of the repair expense that is being claimed
• Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt)
Reimbursement will be made by check from your Daimler Truck North America LLC dealer.
Please speak with your Daimler Truck North America LLC authorized dealer concerning this matter.
Page 6
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
Work Instructions
Emissions Recall: FCCC Clean Idle Label
Models Affected: Specific model years 2019-2024 Freightliner
Custom Chassis
MT45 and MT55 van chassis, B2 106 school bus chassis, and EH High Cab/EL
Low Cab Econic chassis, manufactured June 24, 2019, through January 13, 2023.
Vehicles are powered by DD5® and DD8® engines, engine model years
2020-2021, engines manufactured from July 1, 2019, to August 31, 2021.
FL997 A – Removal and Replacement of Clean Idle Label
(For FL997 B, Do Not Replace Label. See Page 8.)
REVISION: Some vehicles which previously had FL997-A completed have been moved to FL997-B. These vehicles had a
clean idle label installed in error and must have the label removed. See page 8 for FL997-B work instructions.
2ND REVISION: Added inspection-only SRT.
1.
Inspect the base label (Form WAR259) for a campaign completion sticker for FL997 (Form WAR260). The base label
is usually located on the front wall under the dash. If a sticker is present for FL997, no work is needed. If there is no
sticker, proceed with the steps below.
2.
Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
3.
Locate the CERTIFIED CLEAN IDLE label on the front of the driver-side door & inspect for manufacturer’s badge.
Is a ‘Detroit’ or ‘Detroit Diesel’ logo present on the label, as shown in Fig. 1 or Fig. 2?
YES → No further action is required. Go to step 6.
NO → Continue with step 4.
1 ‘Detroit Diesel’ logo
Fig. 1, Clean Idle Label (Detroit Diesel Logo)
4.
1 ‘Detroit’ logo
Fig. 2, Clean Idle Label (Detroit Logo)
Remove the incorrect clean idle label from the vehicle. Thoroughly clean the surface with isopropyl alcohol, and then
dry with a clean towel.
Page 7
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
IMPORTANT: The label is tamper-resistant, so it cannot be repositioned once it contacts the surface of the vehicle.
5.
Place the new label in the same location.
5.1.
To apply the new label, remove the adhesive backing and carefully place the label in the same location from
where the old label was removed. See Fig. 3.
IMPORTANT: Ensure to avoid bubbles and creases.
NOTE: A wide, straight edge, such as a plastic putty knife or a rubber squeegee, is recommended to apply the label
evenly to the surface, taking care not to damage the label.
5.2.
Start at the top, and while moving downward, slowly lower the label to the surface. See Fig. 4.
5.3.
Use a clean towel to firmly press the label to the vehicle surface, work outward from the center. A firm seal
around the edges is extremely important to avoid dirt and water ingress.
Fig. 3, Placing New Label
Fig. 4, Lowering Label to Surface from Top to Bottom
IMPORTANT: To ensure tamper feature functionality, allow 24 hours cure time on the surface at temperatures above 45°F.
6.
Clean a spot on the base label (Form WAR259), and attach a campaign completion sticker for FL997 (Form WAR260),
indicating this work has been completed.
FL997 B – Removal of Clean Idle Label
1.
Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
IMPORTANT: Vehicles in FL997 B do not require a replacement label.
2.
Locate the CERTIFIED CLEAN IDLE label on the front of the driver-side door, and remove the label. Thoroughly
clean the surface with isopropyl alcohol to remove any remaining glue, and then dry with a clean towel.
3.
Clean a spot on the base label (Form WAR259), and attach a campaign completion sticker for FL997 (Form WAR260),
indicating this work has been completed.
Page 8
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
FL997 A – Ordering Clean Idle Label
(This section is not applicable to FL997 B.)
1.
Log in to DTNA Portal. From the sidebar on the left-hand side, select ‘Service.’ Navigate to the ‘Daimler Truck
Technical Support’ panel, and select ‘Order Center.’ See Fig. 5.
DTNA Portal > Service > Daimler Truck Technical Support > Order Center
Fig. 5, DTNA Portal Service Tab
Page 9
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
2.
The ‘Detroit Diesel Order Center’ webpage opens. Select ‘Customer Support Center’ on the right-hand side of the
screen, then select ‘Order Clean Idle Emission Label/Reman Option Level.’ See Fig. 6.
Fig. 6, Detroit Diesel Order Center
3.
Select the ‘+’ icon next to ‘Add A Clean Idle/Emission/Reman/Other Label.’ See Fig. 7.
Fig. 7, Adding a Label to the Order
Page 10
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
4.
From the drop-down menu, against the ‘Item’ field, select ‘Clean Idle Label Replacement (CARB Clean Idle Label).’
See Fig. 8.
5.
Complete the other required fields, select ‘Insert Item,’ then select ‘Next.’ See Fig. 8 and Fig. 9.
NOTE: The price of the label at the time of publishing is $100. Add this cost to the FL997 claim for reimbursement.
Fig. 8, Selecting the Item
Fig. 9, Confirming the Item
Page 11
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A-B
(Revised January 2025)
(2nd Revision November 2025)
6.
Enter the distributor/dealer information and shipping address, then select ‘Next.’ See Fig. 10.
Fig. 10, Shipping Information
7.
Select ‘Warranty System’ as the payment option. Enter ‘FL997’ in the ‘Purchase Order No’ field. Enter the billing
address, then select ‘Next.’ See Fig. 11.
Fig. 11, Payment Option and Billing Address
Page 12
Daimler Truck
North America LLC
Recall Campaign
July 2024
FL997 A -B
(Revised January 2025)
(2nd Revision November 2025)
8.
Select the checkbox to accept the terms and conditions, then select ‘Next.’ See Fig. 12.
Fig. 12, Terms and Conditions
IMPORTANT: Make sure not to select the ‘Place Order’ button more than once, it creates duplicate orders.
9.
Review the order details, enter the captcha, then select ‘Place Order’ button to complete the ordering process.
See Fig. 13.
NOTE: Once the order is placed, an email confirmation is received on the registered email address. For questions or
additional information, call DETROIT™ Daimler Truck Technical Support (DTTS) at 1-800-445-1980, or email
[email protected].
Fig. 13, Order Review
Page 13
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM
✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages - 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- 🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- 【Extensive Compatibility】HD601 heavy duty truck scanner supports 12V & 24V commercial vehicles and all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins
, Paccar
, Detroit, Caterpillar
, Freightliner
, International
, Peterbilt
, Ford
Heavy Truck, Class 4-Class 8 trucks, etc. It also supports engine diagnosis on most cars, minivans, light trucks and pickups - 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins
, Caterpillar
, Detroit, Caterpillar
, Maxxforce, Bendix
,Wabash
, Wabaco, Haldex
, Allison, Eaton
heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money. Note: Only heavy truck vehicles that comply with the above protocol can diagnose the entire system - 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand code definitions and helps you locate vehicle faults. Note: This device cannot directly solve the fault. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work
- Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
- Wide Compatibility - Friendly Reminder: To avoid compatibility issues, please confirm with us via Amazon Messages before purchasing. This heavy duty truck scanner is compatible with all heavy-duty trucks and semi that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins
, Detroit, Caterpillar
, Freightliner
, International
, Kenworth
, John Deere, Peterbilt
, Sterling, Mack
, Paccar
, Western Star
, Mercedes-Benz
, Volvo
, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, ISUZU
etc. Equipped with 6-pin, 9-pin, and 16-pin connectors for versatile device compatibility, ensuring stable plug-and-play connections. - Save Hundreds of Money for All Heavy Duty Trucks – This diesel diagnostic scanner supports accurate full-system scans for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). It can read and clear trouble codes across a range of vehicle systems, including the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The truck scanner communicates directly with your truck's computer to provide real-time data stream analysis, letting you pinpoint issues with precision. This cuts down on waste from unnecessary part replacements, saving you time and hundreds or even thousands of dollars.
- All OBD2 Functions + Battery Health Monitoring – Unlike many obd2 scanners on the market that only cover partial OBD2 features, ours gives you full OBD2 capability: read & clear codes, live data, freeze frame data, I/M readiness checks, EVAP tests, on-board monitor, O2 sensor tests, vehicle info, and DTC lookup. That means more detailed insights for pros and DIYers alike. The NL102 isn't just a code scanner – it's a battery saver. Regularly check your car's battery health, and catch issues before it dies completely. No more unexpected no-starts in the driveway or on the road. It diagnoses battery condition accurately, helping you avoid costly last-minute repairs.
- Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API




