CUSTOMER SATISFACTION NOTIFICATION
NORTH AMERICA

Purge Valve Hose
FCA US LLC
Reference: 90C

2025 (WS) Grand Wagoneer/ Wagoneer
2025 (DT) Ram 1500 Pickup
Template Version 1.8

Revision
0

Edition
13 November 2025

Detail
Initial Version.

SYMPTOM DESCRIPTION
The purge valve hose on about 15,000 of the above
vehicles may become disconnected from the intake
manifold or the purge solenoid. This condition can
cause an engine misfire, rough running and hard
starting. In addition, the Malfunction Indicator Lamp
(MIL) may illuminate on the instrument panel cluster.

SCOPE
This campaign applies only to the above vehicles
equipped with a 3.0L GMET6 HO engine (sales code
EFC).

NOTE: Some vehicles above may have been
identified as not involved in this campaign and
therefore have been excluded from this campaign.
IMPORTANT: Some of the involved vehicles may
be in dealer new vehicle inventory. Dealers should
complete this campaign service on these vehicles
before retail delivery. Dealers should also perform
this repair on vehicles in used vehicle inventory and
those vehicles in for service. Involved vehicles can be
determined by using the VIP inquiry process.

Use the following labor operation numbers and time
allowances:
Labor Description
Number
Hrs
Replace Purge Valve Hose
25-90-C1-82
0.3hrs
NOTE: See the Warranty Administration Manual,
Recall Claim Processing Section, for complete
claim processing instructions.

PARTS INFORMATION
Qty
1
1

Part Name
Purge Hose
04275086AE

Part No.
CCBS90C1AE
Authorization
Modification
Label

PARTS RETURN
No parts return required for this campaign.

SPECIAL TOOLS
No special tools required to perform this service
procedure.

DEALER NOTIFICATION
REPAIR TO BE PERFORMED
Replace the purge solenoid hose by following the
directions outlined in the Service Procedure below.

To view this notification on DealerCONNECT, select
“Global Recall System” on the Service tab, then click
on the description of this notification.

Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any intervention.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved

1/5

CUSTOMER SATISFACTION NOTIFICATION
NORTH AMERICA

Purge Valve Hose
FCA US LLC
Reference: 90C

Owner Notification and Service
Scheduling
All involved vehicle owners known to FCA are being
notified of the service requirement by mail. They are
requested to schedule appointments for this service
with their dealers. A generic copy of the owner letter
is attached.

Vehicle Lists, Global Recall System, VIP
and Dealer Follow Up
All involved vehicles have been entered into the
DealerCONNECT Global Recall System (GRS) and
Vehicle Information Plus (VIP) for dealer inquiry as
needed.

VIN list for each campaign displayed can be sorted by:
those vehicles that were unsold at campaign launch,
those with a phone number, city, zip code, or VIN
sequence.
Dealers should perform this repair on all unsold
vehicles before retail delivery. Dealers should also
use the VIN list to follow up with all owners to schedule
appointments for this repair.
VIN lists may contain confidential, restricted owner
name and address information that was obtained from
the Department of Motor Vehicles of various states.
Use of this information is permitted for this notification
only and is strictly prohibited from all other use.

Additional Information
GRS provides involved dealers with an updated VIN
list of their incomplete vehicles. The owner’s name,
address and phone number are listed if known.
Completed vehicles are removed from GRS within
several days of repair claim submission.

If you have any questions or need assistance in
completing this action, please contact your Service
and Parts District Manager.
Customer Service / Field Operations FCA US LLC

To use this system, click on the “Service” tab and
then click on “Global Recall System.” Your dealer’s

Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any intervention.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved

2/5

CUSTOMER SATISFACTION NOTIFICATION
NORTH AMERICA

Purge Valve Hose
FCA US LLC
Reference: 90C

Service Procedure
1. Release and open the hood.
2. Remove the four push-on engine cover
fasteners (Figure 1).

Figure 1 – Engine Cover Removal
3. Remove the bolted engine cover fastener (Figure 2).

Figure 2 – Bolted Engine Cover Fastener Location

Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any intervention.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved

3/5

CUSTOMER SATISFACTION NOTIFICATION
NORTH AMERICA

Purge Valve Hose
FCA US LLC
Reference: 90C

Service Procedure [Continued]
4. Remove the tree clip (1) (Figure 3).
5. Disconnect the canister purge hose quick
connect at the Ejector-T (2) (Figure 3).
6. Disconnect canister purge tube quick-connect at
the intake manifold (3) (Figure 3).
7. Remove and DISCARD the purge hose.
8. Install the NEW purge hose.
9. Connect the purge hose quick connect at the
intake (3) (Figure 3).
10.

Connect the purge hose quick connect at the
Ejector-T (2) (Figure 3).

11.

Push in the tree clip (1) (Figure 3).

12.

Position the engine cover into position and firmly press into place.

13.

Install and tighten the bolted engine cover fastener to 5.5N∙m (49In. Lbs.) (Figure 2).

14.

Start the engine verify no vacuum leaks.

15.

Connect the wiTECH micro pod II to the vehicle data link connector.

16.

Place the ignition in the “RUN” position.

17.

Open the wiTECH 2.0 website.

18.

Enter your “User id” your “Password” and your “Dealer Code”, then select “Finish” at the bottom of the
screen.

19.

Select “View DTC’s”.

20.

Select the “Clear All DTCs” tab, then click “Clear All DTCs” and then select “Close”. It may be necessary to
cycle the ignition OFF to RUN to clear the codes.

21.

Turn the ignition to the “OFF” position and then remove the wiTECH micro pod II device from the vehicle.

22.

Complete Proof of Correction Form for California Residents:

Figure 3 – Purge Hose

This recall is subject to the State of California Registration Renewal/Emissions Recall Enforcement
Program. Complete a Vehicle Emission Recall Proof of Correction Form (Form No. 81-016-1053) and
supply it to vehicle owners residing in the state of California for proof that this recall has been
performed when they renew the vehicle registration.

Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any intervention.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved

4/5

CUSTOMER SATISFACTION NOTIFICATION
NORTH AMERICA

Purge Valve Hose
FCA US LLC
Reference: 90C
Process Steps to obtain the California Proof of Correction form:
a.
b.
c.
d.
e.

Access the “DealerCONNECT” website.
Select the “Service” tab.
Under the “Publications” heading, select the “ePublishing” link.
Sign in using your Dealer Code and Password.
Select the “Proof of Correction form”.

Install the Authorized Modifications Label:
Type or print (with a ballpoint pen) the
necessary information shown in Figure
4 onto the Authorized Modifications
Label. Then attach the label near the
VECI label.

Figure 1 – Authorized Modifications Label

Figure 4 – Authorized Modifications Label
22.

Return the vehicle to the customer.

Strictly respect STELLANTIS Group safety, cleanliness, and environmental instructions for any intervention.
Document exclusively reserved for dealer information. Internal distribution to be ensured by dealer.
Reproduction forbidden without the written agreement of STELLANTIS Group. (C) 2024 STELLANTIS Group. All Rights Reserved

5/5

This notice applies to your vehicle,

CUSTOMER SATISFACTION NOTIFICATION
Purge Valve Hose

[Model Year and Model]
VIN XXXXXXXXXXXXXXXXX

90C

Dear [Name],

LOGO

At FCA US LLC, we recognize that the success of our business depends on the satisfaction of
our customers. We are constantly monitoring the quality of our products and looking for
opportunities to improve our vehicles even after they are sold. Because your long-term
satisfaction is important to us, we are contacting you on important improvements we would
like to make to your vehicle [1]. This will be done at no charge to you.

VEHICLE PICTURE

We are recommending the following improvements be performed on certain [2025 Model
Year (WS) Wagoneer/Grand Wagoneer, (DT) Ram 1500 Pickup] vehicles equipped with a
3.0L GMET6 HO engine.

YOUR SCHEDULING OPTIONS
1. RECOMMENDED OPTION
Call your authorized Chrysler /
Dodge / Jeep® / RAM Dealership
2. Call the FCA Recall Assistance
Center at 1-800-853-1403. An
agent
can
confirm
part
availability and help schedule an
appointment
3. Visit recalls.mopar.com, scan the
QR code below, or download the
Mopar Owner’s Companion App.

QR Code

Get access to recall notifications,
locate your nearest dealer, and more
through this website or Mopar
Owner’s Companion App. You will be
asked to provide your Vehicle
Identification Number (VIN) to
protect and verify your identity.
DEALERSHIP INSTRUCTIONS
Please reference CSN 90C.

WHY DOES MY VEHICLE NEED REPAIRS?
The purge valve hose on your vehicle may become disconnected from the intake manifold or
the purge solenoid. This condition can cause an engine misfire, rough running and hard
starting. In addition, the Malfunction Indicator Lamp (MIL) may illuminate on the instrument
panel cluster.
HOW DO I RESOLVE THIS CUSTOMER SATISFACTION NOTIFICATION?
FCA US will repair your vehicle free of charge (parts and labor). To do this, your dealer
will replace the purge valve hose. The estimated repair time is about 30 minutes. In
addition, your dealer will require your vehicle for proper check-in, preparation, and check-out
during your visit, which may require more time. Your time is important to us, so
we recommend that you schedule a service appointment to minimize your inconvenience.
Please bring this letter with you to your dealership.
TO SCHEDULE YOUR FREE REPAIR,
CALL YOUR CHRYSLER, DODGE, JEEP OR RAM DEALER TODAY
CALIFORNIA RESIDENTS
The State of California requires the completion of this emission recall repair prior to vehicle
registration renewal. Your dealer will provide you with a Vehicle Emission Recall Proof of
Correction Form after the Customer Satisfaction Notification service is performed. Be sure to
save this form since the California Department of Motor Vehicles may require that you supply
it as proof that the Customer Satisfaction Notification has been performed.
In order to ensure your full protection under the emissions warranty provisions, it is
recommended that you have your vehicle serviced as soon as possible. Failure to do so could
be determined as lack of proper maintenance of your vehicle.
WHAT IF I ALREADY PAID TO HAVE THIS REPAIR COMPLETED?
If you have already experienced this specific condition and have paid to have it repaired, you
may visit www.fcarecallreimbursement.com to submit your reimbursement request online. [2]
Once we receive and verify the required documents, reimbursement will be sent to you within
60 days. If you have had previous repairs performed and/or already received reimbursement,
you may still need to have the repair performed.
We apologize for any inconvenience, but are sincerely concerned about your satisfaction.
Thank you for your attention to this important matter.
Customer Assistance/Field Operations
FCA US LLC

Mr. Mrs. Customer
1234 Main Street
Hometown, MI 48371

[1] If you no longer own this vehicle, please help us update our records. Call the FCA Recall Assistance Center at 1-800-853-1403 to update your information.
[2] You can also mail in your original receipts and proof of payment to the following address for reimbursement consideration: FCA Customer Assistance, P.O. Box 218004, Auburn Hills, MI 48321-8007, Attention: Recall Reimbursement.