NHTSA ID Number: 11023093
Manufacturer Communication Number: N252516900
TSB/Document Date: 2025-09-11
Summary
Emission Recall. General Motors
has decided to conduct a Voluntary Emission Recall. Certain vehicles listed above may have a condition which can cause the fuel pump power control module to fail. If this were to occur, fuel flow to the engine could be interrupted. Dealers will replace the fuel pump power control module.
GENERAL MOTORS![]()
DCS7318
URGENT - DISTRIBUTE IMMEDIATELY
Date:
September 11, 2025
Subject: N252516900 - Emission Recall
Fuel Pump Power Control Module
Models: 2021-2022 Buick
Envision
2021 Cadillac
Escalade and ESV
2021-2023 Cadillac
XT4
2021-2022 Cadillac
XT5
2021-2022 Cadillac
XT6
2021 Chevrolet
Blazer
2021 Chevrolet
Camaro
2022 Chevrolet
Equinox
2021 Chevrolet
Malibu
2021 Chevrolet
Suburban
2021 Chevrolet
Tahoe
2021-2022 GMC
Acadia
2021 GMC
Savana
2022 GMC
Terrain
2021 GMC
Yukon and XL
General Motors
is releasing Emission Recall N252516900 today.
This is a phased launch.
What Should Dealers Do: Dealers should review IVH, or the Dealer Maxis reports
for open VINs in their inventory. Dealers can view the attached bulletin, and it
will also be displayed in Service Information tomorrow.
A Stock VIN list is not included as our records show there are no vehicles in
dealer new inventory.
For dealers with involved vehicles, a listing has been prepared and will be
available through GM Global Connect Maxis Field Action Reports or GWM Field
Action Batch Search Report. The Inventory tab of the dealer reports will contain
VINs that apply to this field action. This information is intended to assist dealers
with the PROMPT COMPLETION of these vehicles. The Customer In-Service
tab will contain customer names and addresses from Motor Vehicle Registration
Records. The use of such motor vehicle registration data for any purpose other
than follow-up necessary to complete this field action may be a violation of law in
several states.
END OF MESSAGE
Emission Recall
N252516900 Fuel Pump Power Control Module
Release Date:
Attention:
September 2025
Revision:
00
THIS IS A PHASED LAUNCH.
Investigate Vehicle History (IVH) in the GM Global Warranty Management system MUST always
be checked to confirm vehicle involvement and MUST be in OPEN status prior to beginning any
required inspections and/or repairs. DO NOT use Service Information with VIN search, as it will
not verify the VIN eligibility for field actions.
Model Year
Make
Buick![]()
Cadillac![]()
Cadillac![]()
Cadillac![]()
Cadillac![]()
Cadillac![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
Chevrolet![]()
GMC![]()
GMC![]()
GMC![]()
GMC![]()
GMC![]()
Model
From
2021
2021
2021
2021
2021
2021
2021
2021
2022
2021
2021
2021
2021
2021
2021
2022
2021
2021
Envision
Escalade
Escalade ESV
XT4
XT5
XT6
Blazer
Camaro
Equinox
Express
Malibu
Suburban
Tahoe
Acadia
Savana
Terrain
Yukon
Yukon XL
To
2022
2021
2021
2023
2022
2022
2021
2021
2022
2021
2021
2021
2021
2022
2021
2022
2021
2021
Investigate Vehicle History (IVH) in the GM Global Warranty Management system MUST always be checked to confirm
vehicle involvement and MUST be in OPEN status prior to beginning any required inspections and/or repairs. DO NOT
use Service Information with VIN search, as it will not verify the VIN eligibility for field actions.
Condition
Correction
General Motors
has decided to conduct a Voluntary Emission Recall. Certain vehicles listed above
may have a condition which can cause the fuel pump power control module to fail. If this were to
occur, fuel flow to the engine could be interrupted.
Dealers will replace the fuel pump power control module.
Parts
Quantity
1
1
Part Name
Fuel Pump Power Control Module
Fuel Pump Power Control Module
Part No.
13554821
13554820
Note: Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which Fuel Pump Power Control Module to
order.
Reminder: Parts may be removed from SPRINT and Retail Inventory Management (RIM) and be non-returnable. Dealers
should review the affected parts to confirm RIM managed status. Parts may have quantity limiters in effect. There are a
small number of vehicles anticipated that will need this fix. Due to the limited initial parts availability, dealers are
encouraged not to order these parts for use as shelf stock.
Page 1 of 5
Emission Recall
N252516900 Fuel Pump Power Control Module
Warranty Information
Labor
Operation
9108005
9108006
9108007
Description
Fuel Pump Power Control Module Replacement
XT5, XT6, Camaro (LTG), Blazer, Acadia
Equinox, Terrain, Yukon, Tahoe, Suburban, Escalade, Malibu,
Envision, Express, Savana
XT4
Customer Reimbursement Approved
- For USA and Canada dealers only
- For Export dealers only
Customer Reimbursement Denied – For USA dealers only
Labor
Time
Trans.
Type
ZFAT
Net
Item
N/A
ZFAT
*
ZFAT
**
0.3
0.4
0.5
N/A
0.2
N/A
Note: To avoid having to “H” route the customer reimbursement transaction for approval, it must be submitted prior to the
repair transaction.
* For USA & Canada: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement. Submit $20.00 USD
($25.00 CAD) administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement.
** Submit $10.00 administrative allowance in Net/Admin Allowance.
Service Procedure
Important: Service agents must comply with all International
, Federal, State, Provincial, and/or Local laws applicable to
the activities it performs under this bulletin, including but not limited to handling, deploying, preparing, classifying,
packaging, marking, labeling, and shipping dangerous goods. In the event of a conflict between the procedures set forth
in this bulletin and the laws that apply to your dealership, you must follow those applicable laws.
1.
Replace the Fuel Pump Power Control Module. Refer to Fuel Pump Power Control Module Replacement in SI.
2.
CALIFORNIA, COLORADO, CONNECTICUT, DELAWARE, MAINE, MARYLAND, MASSACHUSETTS, NEW
JERSEY, NEW YORK, OREGON, RHODE ISLAND, VERMONT, WASHINGTON VEHICLES ONLY: Install a
Recall Identification Label upon recall completion. See General Motors
Service Policies and Procedures Manual,
Recall Identification Label, for details.
3.
CALIFORNIA VEHICLES ONLY: Complete a “Proof of Correction” certificate and provide to the vehicle owner upon
recall completion. For the recall number on the “Proof of Correction” certificate, enter only the six digits in
characters 4-9 of this recall bulletin number: 251690.
Dealer Responsibility
All new, used, GM Certified Pre-Owned (CPO), courtesy transportation vehicles, dealer shuttle vehicles, CarBravo, etc.
in dealers' possession and subject to this recall must be held and inspected/repaired per the service procedure of this
bulletin before customers take possession of these vehicles. Involved vehicles must be held and not delivered to
customers, dealer-traded, released to auction, used for demonstration, or any other purpose.
All GM Certified Pre-Owned (CPO) vehicles currently in the dealers’ inventory within the SHIFT Digital system will be
de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting an accepted/paid
warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified for sale within
the SHIFT Digital system, or once again be used in the Courtesy Transportation Program.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle,
or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer
information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the
required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this
bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the
customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory you must take the steps necessary to
ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering your facility for
service, you are required to ensure the customer is aware of the open recall and make every reasonable effort to
implement the program correction as set forth in this bulletin prior to releasing the vehicle.
Page 2 of 5
Emission Recall
N252516900 Fuel Pump Power Control Module
***THE FOLLOWING 2 PARAGRAPHS ARE NOT FOR CANADA OR EXPORT***
When a California emissions recall is completed by a GM dealer, the dealer must provide the vehicle owner a “Proof of
Correction Certificate” which the owner may need to present to the California Department of Motor Vehicles (DMV) when
renewing their vehicle registration. Without this correction certificate, the owner may be unable to renew their vehicle
registration.
Additional Certificates can be obtained, at no charge, from the 1Store application in Global Connect. Request GM Item
Number 1825 when ordering.
Dealer Reports – For USA
For dealers with involved vehicles, a listing has been prepared and will be available through GM Global Connect Maxis
Field Action Reports or GWM Field Action Batch Search Report. The Inventory tab of the dealer reports will contain
VINs that apply to this field action. This information is intended to assist dealers with the PROMPT COMPLETION of
these vehicles. The Customer In-Service tab will contain customer names and addresses from Motor Vehicle
Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary
to complete this field action may be a violation of law in several states.
Courtesy Transportation
USA - For repairs covered under this Field Action, Courtesy Transportation can be made available ONLY if the
customer/vehicle qualify for Courtesy Transportation per Bulletin 07-00-89-037.
Canada - Courtesy transportation is available for customers whose vehicles are involved in a product program and still
within the warranty coverage period. See General Motors
Service Policies and Procedures Manual for courtesy
transportation program details. Refer to the most current Home Office Letter (YYYY-604) on the Courtesy
Transportation Program for details.
Customer Notification
USA & Canada - General Motors
will notify customers of this recall on their vehicle (see copy of sample customer letter
included with this bulletin).
In order to ensure full protection under the emission warranty, and the right to participate in future recalls, the customer
notification letter recommends that customers have their vehicles serviced as soon as possible. It also advises that failure
to do so could legally be determined to be lack of proper maintenance. The vehicle may fail a state or local emission
inspection test if the recall work is not completed.
Customer Reimbursement
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to
be submitted to the dealer prior to or by November 30, 2026. See General Motors
Service Policies and Procedures
Manual (USA & Canada) or local Policies and Procedures, for details.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 3 of 5
Emission Recall
N252516900 Fuel Pump Power Control Module
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors
Customer:
This notice is sent to inform you that General Motors
is conducting a voluntary emission recall that includes your
vehicle.
Reason For This Recall: Certain vehicles may have a condition which can cause the fuel pump power control module
to fail. If this were to occur, fuel flow to the engine could be interrupted.
What Will Be Done: Your GM dealer will replace the fuel pump power control module. This service will be performed
for you at no charge. Eligibility for this service will not be denied solely due to your vehicle having non-GM parts or
repairs performed by outlets other than a GM franchised dealer.
How Long Will The Repair Take? Because of service scheduling requirements, it is likely that your dealer will need
your vehicle longer than the actual service correction time of approximately 30 minutes.
What You Should Do: Please contact your GM dealer as soon as possible to arrange a service date and to assure
parts availability. Instructions for making this correction have been sent to your dealer. Please ask your dealer if you
wish to know how much time will be needed to schedule, process, and repair your vehicle.
Reimbursement: Even though you may have previously had repairs for this condition, you will still need to take your
vehicle to your dealer for additional repairs. If you have already paid for repairs for the condition described in this letter,
and those repairs were completed prior to this mailing, please complete the enclosed reimbursement form and
present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if
this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement
Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented
to your dealer or received by the Reimbursement Department by November 30, 2026, unless state law specifies a
longer reimbursement period.
You may schedule your vehicle for repair using the QR code below. For more information about your vehicle, or if you
have questions or concerns that your dealer is unable to resolve, please visit gm.com/service. You can also use your
preferred voice assistant (for example, “Please go to GM.com”), or call the Buick
, Chevrolet
or GMC
Customer
Assistance Center at 1-866-467-9700. For Cadillac
, please call 1-800-333-4223.
For the hearing or speech impaired, please contact our Customer Assistance Center using the Telecommunication
Relay Service by dialing 711 then providing the appropriate Customer Assistance Center number for your vehicle.
Emission Law Information: In order to ensure your full protection under the emission warranty made applicable to
your vehicle by state and federal law, and your right to participate in future recalls, it is recommended that you have
your vehicle serviced as soon as possible. Failure to do so could legally be determined to be lack of proper
maintenance of your vehicle. Also, your vehicle may fail a state or local emission inspection if this recall is not
accomplished.
IMPORTANT MESSAGE FOR CALIFORNIA RESIDENTS
The California Air Resources Board (CARB) requires vehicle emission recalls be completed prior to California
registration renewal. Uncorrected emission recalls will result in the inability to renew your California vehicle registration.
At the time of emission recall completion, your California dealer will issue a "Proof of Correction Certificate". Keep this
certificate and, if required, present it to the Department of Motor Vehicles when renewing your California registration as
proof of recall completion.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued
satisfaction with our products.
Page 4 of 5
Emission Recall
N252516900 Fuel Pump Power Control Module
Regina A. Carto
Vice President
Global Product Safety and Systems
Scan here to
locate a dealer.
Enclosure
GM Recall: N252516900
Page 5 of 5
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N252516900
Replacement Service Bulletin Number:
MFR Communication Date: 2025-09-11
MFR Internal Campaign ID/Software Version: N252516900
Communication Type: Emissions
NHTSA Components: FUEL/PROPULSION SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW
, for Audi
, for GM, for Ford
and more. Note:D200 does‘t provide any OE software. - 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- Pro Features, Home Mechanic Budget: Why pay thousands for factory scan tool? The VD70S scan tool delivers advanced professional diagnostic at an affordable price, including 10x faster 33-66ft wireless scanning, 4000+ active tests, 36+ hot services, ECU coding, PMI function, and OE-level full-system scan with 8-in-one data graph. It rivals expensive shop tools - perfect for DIYer, technician and small shop. Get dealer-grade power without the cost - the VD70S obd2 scanner diagnostic tool makes pro diagnostic accessible to all. The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase
- Full Bidirectional Control for Precision Repair: VD70S obd2 scanner gives you direct vehicle module control to test components like fuel pump, injector, A/C clutch, window and more, enabling you to accurately and quickly locate faulty components. Unlike basic obd2 code reader, our advanced bidirectional control lets you actively command system - like triggering the ABS pump to confirm your fix worked. With pinpoint component testing and real-time validation, you can diagnose intermittent issues faster and prevent costly return visits. The VD70S auto diagnostic scanner transforms complex diagnostic into precise, time-saving repair - giving professional-grade accuracy at an unbeatable value
- 33-66FT Wireless Freedom - Faster & More Stable: Say goodbye to 2M cable limits. Easily Perform bi-directional tests like folding mirror, activating light or fuel pump while walking freely around your vehicle - no more cable dragging or repositioning your tool. Unlike other 33ft BT obd2 scanner that still need a cable to handle DOIP vehicle diagnostics, the VD70S bidirectional scan tool delivers a truly cable-free experience - with up to 66ft stable transmission range and faster, more reliable data transfer. With VD70S scanner, you get pro-level flexibility, faster workflow and stable diagnostics without cable clutter or wireless dropouts
- Powerful & Affordable Auto Scanner with 36+ Special Functions: Take control of your vehicle maintenance and save hundreds in shop fees with the VD70S car diagnostic tool. This car tool performs 36+ hot services including ✔Crank Sensor Relearn, Oil Reset, EPB, TPMS Reset, Throttle Adaptation, Injector Coding, ABS Bleed and more. ✔Besides, the VD70S bidirectional obd2 scanner unlocks 100+ advanced vehicle-specific functions under specific system menu, including Idle Relearn, VIN Write, Crankshaft Sensor Relearn, Fuel Trim Reset, ABS Initialization and more. These features help you solve complex system error and restore optimal vehicle performance. Text us your VIN we’ll check the compatibility
- OE-Level Full System Diagnostic, Simplified Workflow: The VD70S car diagnostic scanner delivers OE-level full system scanning (ABS/ECM/BCM/SRS/TCM and more) without the dealership cost. ✔Easily view 8 live data streams, retrieve freeze frame and run active test to quickly identify problem. ✔With advanced bidirectional control, test components like fuel injector and sensor directly to verify repair with certainty. ✔The 8-in-one graphing tracks performance trend to catch intermittent issue like a pro. Whether you're a technician or car owner, the diagnostic scanner provides shop-quality diagnostic to optimize performance and prevent costly repair - all in one affordable tool
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




