NHTSA ID Number: 11022040
Manufacturer Communication Number: B25-040
TSB/Document Date: 2025-08-21
Summary
Service Bulletin - When the vehicle is put into reverse, the rear camera may display a black and white image. This could occur intermittently, and can change between color display to a black and white display.
Service Bulletin
25-040
August 13, 2025
Version 1
Rear Camera Displays Black and White Image
APPLIES TO
Year
Model
Trim Level
VIN Range
2023–25
Integra
Base, A-Spec Base
ALL
SYMPTOM
When the vehicle is put into reverse, the rear camera may display a black and white image. This could occur intermittently
and can change between color display to a black and white display.
POSSIBLE CAUSE
The audio unit software threshold may have an incorrect setting for the rear camera. When the color burst signal is low, the
software threshold processes the image from the rear camera to a black and white image.
CORRECTIVE ACTION
Update the vehicles software via USB flash drive.
WARRANTY CLAIM INFORMATION
Operation
Number
Description
Flat Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed Part Number
0100A1
Update the audio unit
software
0.3hr
03265
03273
B25040A
8A100-3S5-A01
REQUIRED MATERIALS
Part Name
Formatting
Part Number
Quantity
USB-A Flash Drive
FAT32
Commercially available
1
CLIENT INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and
training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this
bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized
Acura
automobile dealer.
© 2025 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 12
INSPECTION PROCEDURE
1. Make sure there are no devices connected to the front and rear (if equipped) USB ports. (USB flash drive, Smartphone,
etc.)
2. Connect one of the following, then set its mode:
•
•
Midtronics DCA-8000 Dynamic Diagnostics Charging System in Reflash Mode
Associated Equipment Corporation ESS6100 100A Smart Charger in Power Supply Mode | DIAG+
NOTE: Make sure the ESS6100 is connected directly to the vehicle’s 12-volt battery, leave it connected during the
entire update procedure to maintain constant voltage.
3. Apply the parking brake to keep the headlights off during the update procedure.
Loss of power during the update can cause irreparable damage to the audio unit.
4. Without pressing the brake pedal, push the ENGINE START/STOP button to ON.
5. With the audio unit turned OFF, press the PHONE and CONNECT buttons at the same time, continue to hold the
buttons, then press the VOL/
AUDIO knob 5 times to enter the diagnostic menu.
Page 2 of 12
6. Select System, then scroll down and select Version.
Page 3 of 12
7. Check the audio unit SW Version and the Video Processor version.
01.11.030
01.01.187
01.11.058
01.01.046
Is the SW Version and Video Processor equal to or greater than 01.11.030 and 01.11.058?
• Yes - The update has been applied, continue normal troubleshooting.
• No - Update the SW Version and Video Processor to the following:
o Software Version 01.11.030
o Video Processor 01.11.058
Continue to Acura Firmware Downloader.
8. Push the ENGINE START/STOP button to OFF.
Page 4 of 12
ACURA FIRMWARE DOWNLOADER
1. From your computer, select and open the Acura Firmware Downloader. Make sure to use a blank USB flash drive that is
formatted to FAT32. Refer to the Job Aid: Acura Firmware Downloader for additional information.
2. Refer to the corresponding service bulletin that directs you to use the Acura Firmware Downloader. Enter the service
bulletin number and the VIN, then press Search. The system will provide the available software update version.
NOTE: The VIN field letters must be entered in CAPS.
Vehicle
Integra
Model Year(s)
Vehicles Original
Software Version
Honda Firmware
Downloader Service
Bulletin Number
Software Update
Version
2023–2025
Software Version
01.11.020
Video Processor
01.11.056
25-040
H1P2Z049.kwi
Page 5 of 12
3. Select the Download Icon, you will be instructed to insert a blank USB flash drive.
NOTE:
• Make sure the USB flash drive is blank and formatted to FAT32. If there are any files on the USB flash drive the
system will indicate an error and notify you that the USB flash drive is not blank.
• The software download may take up to 15 minutes depending on the size of the file.
4. Once the download is complete, remove the USB flash drive and return to the vehicle to complete the update.
NOTE: If at any time during the download process a “TIMEOUT err” or “UNDEF err” message appears on the screen,
check the USB flash drive for damage, use a new or different USB flash drive.
Page 6 of 12
REPAIR PROCEDURE
1. Apply the parking brake to keep the headlights off during the update procedure.
2. Without pressing the brake pedal, push the ENGINE START/STOP button to ON.
3. Insert the USB flash drive into the USB data port.
NOTE:
• Make sure there are no devices connected to the front and rear (if equipped) USB ports. (USB flash drive,
Smartphone, etc.)
• Connect the power supply to the vehicle, leave it connected during the entire update procedure to maintain
constant voltage.
Loss of power during the update can cause irreparable damage to the audio unit.
USB-A Data Port
Page 7 of 12
4. With the audio unit turned OFF, press the PHONE and CONNECT buttons at the same time, continue to hold the
buttons, then press the VOL/ AUDIO knob 5 times to enter the diagnostic menu.
5. Select System, then scroll down and select Software Update.
NOTE: If the Software Update selection is grayed out, make sure the USB flash drive is fully inserted and in the USB
data port, not the USB charging port.
6. Select YES to begin the software update.
NOTE: The update process will take about 32 minutes, which includes software checking and updating.
Page 8 of 12
Software Check
1. During the software “Checking” stage, it is important to confirm the software information on the screen matches the
software table.
2. If the information does not match the table below, immediately press CANCEL. The update file on the USB flash drive
does not apply to this vehicle. Confirm that you have downloaded the correct file for the vehicle model/trim you are
working on.
Software Version
01.11.030
System uCOM
01.01.187
Video Processor
01.11.058
Media Processor
01.01.046
EXAMPLE: Incorrect Software
Ver. 02.10.030
Ver. 02.01.044
Ver. 02.10.022
Ver. 02.01.011
NOTE:
• Only update the audio unit software if the software information matches the information table shown above.
• This software “Checking” process will take about 16 minutes; the software update will start automatically.
Updating with the incorrect software will damage the audio unit and will require unit replacement.
Page 9 of 12
Software Updating
1. The screen will turn black and the updating screen will appear.
NOTE:
• DO NOT disconnect the USB flash drive until the software update is complete.
• The updating process will take about 16 minutes.
2. After the update is complete the unit will automatically reboot to Audio is OFF mode.
Page 10 of 12
SOFTWARE UPDATE CONFIRMATION
1. With the audio unit turned OFF, press the PHONE and CONNECT buttons at the same time, continue to hold the
buttons, then press the VOL / AUDIO knob 5 times to enter the diagnostic menu.
2. Select System, then scroll down and select Version.
Page 11 of 12
3. Confirm the software versions match the table below.
01.11.030
01.01.187
01.11.058
01.01.046
Software Version
01.11.030
System uCOM
01.01.187
Video Processor
01.11.058
Media Processor
01.01.046
4. Push the VOL/
AUDIO button to exit the diagnostic menu.
5. Push the VOL/
AUDIO button to turn the audio unit ON.
6. Push and hold the VOL/
AUDIO button for more than 2 seconds to bypass the anti-theft mode.
01.11.030
01.01.187
01.11.058
01.01.046
7. The update procedure is complete. Remove the USB flash drive from the vehicle.
Page 12 of 12
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B25-040
Replacement Service Bulletin Number:
MFR Communication Date: 2025-08-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.