NHTSA ID Number: 11022036
Manufacturer Communication Number: A25-071
TSB/Document Date: 2025-08-21
Summary
Service Bulletin - When the vehicle is put into reverse, the rear camera may display a black and white image. This could occur intermittently, and can change between color display to a black and white display.
Service Bulletin
25-071
August 13, 2025
Version 1
Rear Camera Displays Black and White Image
APPLIES TO
Year
Model
Trim Level
VIN Range
2023–25
CR-V
LX, EX, Sport
ALL
SYMPTOM
When the vehicle is put into reverse, the rear camera may display a black and white image. This could occur intermittently,
and can change between color display to a black and white display.
POSSIBLE CAUSE
The audio unit software threshold may have an incorrect setting for the rear camera. When the color burst signal is low, the
software threshold processes the image from the rear camera to a black and white image.
CORRECTIVE ACTION
Update the vehicles software via USB flash drive.
WARRANTY CLAIM INFORMATION
Operation
Number
Description
Flat Rate
Time
Defect
Code
Symptom
Code
Template
ID
Failed Part Number
0100A1
Update the audio unit
software
0.3hr
03265
03273
A25071A
8A100-3A0-A02
REQUIRED MATERIALS
Part Name
Formatting
Part Number
Quantity
USB-A Flash Drive
FAT32
Commercially available
1
CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment,
and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not
assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact
an authorized Honda
automobile dealer.
© 2025 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 12
INSPECTION PROCEDURE
1. Make sure there are no devices connected to the front and rear (if equipped) USB ports. (USB flash drive,
Smartphone, etc.)
2. Connect one of the following and set its mode:
•
•
Midtronics DCA-8000 Dynamic Diagnostics Charging System in Reflash Mode
Associated Equipment Corporation ESS6100 100A Smart Charger in Power Supply Mode | DIAG+
NOTE: Make sure the ESS6100 is connected directly to the vehicle’s 12-volt battery, leave it connected during the
entire update procedure to maintain constant voltage.
3. Apply the parking brake to keep the headlights off during the update procedure.
Loss of power during the update can cause irreparable damage to the audio unit.
4. Without pressing the brake pedal, push the ENGINE START/STOP button to ON.
5. With the audio unit turned OFF, press the PHONE and CONNECT buttons at the same time, continue to hold the
buttons, then press the VOL/ AUDIO knob 5 times to enter the diagnostic menu.
Page 2 of 12
6. Select System, then scroll down and select Version.
Page 3 of 12
7. Check the audio unit SW Version and the Video Processor version.
01.10.030
01.01.187
01.01.058
01.01.046
Is the SW Version and the Video Processor equal to or greater than 01.10.030 and 01.01.058?
• Yes - The update has been applied; continue normal troubleshooting.
• No - Update the SW Version and Video Processor to the following:
o Software Version 01.10.030
o Video Processor 01.01.058
Continue to Honda Firmware Downloader.
8. Push the ENGINE START/STOP button to OFF.
Page 4 of 12
HONDA FIRMWARE DOWNLOADER
1. From your computer, select and open the Honda Firmware Downloader. Make sure to use a blank/empty USB flash
drive that is formatted to FAT32. Refer to the Job Aid: Honda Firmware Downloader for additional information.
2. Refer to the corresponding service bulletin that directs you to use the Honda Firmware Downloader. Enter the service
bulletin number and the VIN, then press Search. The system will provide the available software update version.
NOTE: The VIN field letters must be entered in CAPS.
Vehicle
CR-V
Model Year(s)
Vehicles Original
Software Version
Honda Firmware
Downloader Service
Bulletin Number
Software Update
Version
2023–2025
Software Version
01.10.030
Video Processor
01.01.058
25-071
H1P2Z047.kwi
Page 5 of 12
3. Select the Download Icon, you will be instructed to insert a blank USB flash drive.
NOTE:
• Make sure the USB flash drive is blank and formatted to FAT32. If there are any files on the USB flash drive the
system will indicate an error and notify you that the USB flash drive is not blank.
• The software download may take up to 15 minutes depending on the size of the file.
4. Once the download is complete, remove the USB flash drive and return to the vehicle to complete the update.
NOTE: If at any time during the download process a “TIMEOUT err” or “UNDEF err” message appears on the screen,
check the USB flash drive for damage, use a new or different USB flash drive.
Page 6 of 12
UPDATING THE AUDIO UNIT
1. Apply the parking brake to keep the headlights off during the update procedure.
2. Without pressing the brake pedal, push the ENGINE START/STOP button to ON.
3. Insert the USB flash drive into the USB data port.
NOTE:
• Make sure there are no devices connected to the front and rear (if equipped) USB ports. (USB flash drive,
Smartphone, etc.)
• Connect the power supply to the vehicle, leave it connected during the entire update procedure to maintain
constant voltage.
Loss of power during the update can cause irreparable damage to the audio unit.
USB-A Data Port
Page 7 of 12
4. With the audio unit turned OFF, press the PHONE and CONNECT buttons at the same time, continue to hold the
buttons, then press the VOL/ AUDIO knob 5 times to enter the diagnostic menu.
5. Select System, then scroll down and select Software Update.
NOTE: If the Software Update selection is grayed out, make sure the USB flash drive is fully inserted and in the USB
data port, not the USB charging port.
6. Select YES to begin the software update.
NOTE: The update process will take about 32 minutes, which includes software checking and updating.
Page 8 of 12
Software Check
1. During the software “Checking” stage, it is important to confirm the software information on the screen matches the
software table.
2. If the information does not match the table below, immediately press CANCEL. The update file on the USB flash drive
does not apply to this vehicle. Confirm that you have downloaded the correct file for the vehicle model/trim you are
working on.
Software Version
01.10.030
System uCOM
01.01.187
Video Processor
01.01.058
Media Processor
01.01.046
EXAMPLE: Incorrect Software
Ver. 02.10.030
Ver. 02.01.044
Ver. 02.10.022
Ver. 02.01.011
NOTE:
• Only update the audio unit software if the software information matches the information table shown above.
• This software “Checking” process will take about 16 minutes; the software update will start automatically.
Updating with the incorrect software will damage the audio unit and will require unit replacement.
Page 9 of 12
Software Updating
1. The screen will turn black and the updating screen will appear.
NOTE:
• DO NOT disconnect the USB flash drive until the software update is complete.
• The updating process will take about 16 minutes.
2. After the update is complete the unit will automatically reboot to Audio is OFF mode.
Page 10 of 12
SOFTWARE UPDATE CONFIRMATION
1. With the audio unit turned OFF, press the PHONE and CONNECT buttons at the same time, continue to hold the
buttons, then press the VOL/ AUDIO knob 5 times to enter the diagnostic menu.
2. Select System, then scroll down and select Version.
Page 11 of 12
3. Confirm the software versions match the table below.
01.10.030
02.10.030
02.01.044
01.01.187
01.01.058
02.10.002
01.01.046
02.01.011
Software Version
01.10.030
System uCOM
01.01.187
Video Processor
01.01.058
Media Processor
01.01.046
4. Push the VOL/
AUDIO button to exit the diagnostic menu.
5. Push the VOL/
AUDIO button to turn the audio unit ON.
6. Push and hold the VOL/
AUDIO button for more than 2 seconds to bypass the anti-theft mode.
01.10.030
01.01.187
01.01.058
01.01.046
7. The update procedure is complete. Remove the USB flash drive from the vehicle.
Page 12 of 12
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A25-071
Replacement Service Bulletin Number:
MFR Communication Date: 2025-08-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool scanner for car newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【15+ Advanced Reset & Calibration Functions】The Thinkdiag scanner provides 15+ professional maintenance functions, including:✔ Oil Reset | ✔ ABS Bleeding | ✔ Injector Coding | ✔ SAS Reset✔ TPMS Reset | ✔ BMS Reset | ✔ Transmission Adaptation | ✔ AFS Reset | ✔ Sunroof Calibration | ✔ Brake Reset | ✔ Suspension Relearn | ✔ Electronic Throttle Relearn | ✔ Seat Calibration | + More reset/relearn/calibrate/adaptive functions under automotive full systems diagnostic menu. Ideal professional OBDII scanner for mechanics and DIY enthusiasts, Thinkdiag delivers professional OE-level diagnostics with adaptive relearn capabilities for precise vehicle servicing.
- 【Full-System Diagnostics OBD2 Scanner Bluetooth】 Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear DTCs, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It works with most car models after 1996, cover more than 120+ car brands. All car make and reset software come with 1 year update without any charge, much valuable and powerful than 1000 dollars level scanners in the market.
- 【Potential Feature Activation】 Thinkdiag diagnose obd2 scanner Bluetooth allows you to match the replaced components with ECU, activate potential functions for BMW, for GM, for Benz etc. Adjust some annoying features, adapt vehicle's settings to improve performance. No matter you are private owner or professional technician, Thinkdiag is a powerful and handy scanner in your repair tool list. Potential features are not suitable for every car models, please check with us before purchase. This superior function required newest Android OS device, it performs better on Android cell phone.
- 【Bidirectional Test/Active Test】 Thinkdiag car code reader actuates solenoids and actuators for active testing, send commands to systems/components to test their real-time working status, without using manual vehicle controls which saves much diagnostic time and effort to identify malfunction causes. You can check windows, doors, mirrors, sunroof, fans, fuel pump and other parts working status by actuation test function, thinkdiag supports 10000+ active tests. When you process Automotive full system diagnostic, you can do active test on every supported module.
- 【Intelligent Diagnostic Tool with Auto-VIN】Thinkdiag Bluetooth OBD2 scanner makes your smart phone device become a professional vehicle diagnostic tool, it compatible with Android and iOS system. Auto-VIN function supports the Thinkdiag identifies the most car models automatically, if autovin failed, you can choose car info manually. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined 4-in-1 Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.