Service

Technical Information

2025

ENU

WSE9

4

WSE9 - Replace Disc Wheels (Workshop Campaign)
Model Line:

911 (992)

Model Year:

2025

Equipment:

Wheels painted in Anthracite Grey (M-no. 1NA)

Concerns:

Disc wheels

Cause:

Disc wheels with different color or with different color hub caps were installed on the affected vehicles
due to a control error.

Action:

Replace hub cap or disc wheels and hub cap depending on the assigned campaign scope.
Information
Every vehicle is assigned to exactly one campaign scope.
⇒ To determine the scope assigned to the relevant vehicle, see PCSS Vehicle Information.
Depending on the scope, the following actions ensue:
•

Scope 1: Hand out disc wheels to the customer (customer consultation required)

•

Scope 2: Replace disc wheels (customer consultation required)

•

Scope 3: Replace wheel trim cover

Determine work procedure based on the scope assigned to the vehicle:

AfterSales

Jul 10, 2025
Page 1 of 6

4

Service
WSE9

ENU

Technical Information

2025

Assigned scope

Customer consultation

Action

Scope 1 and Scope 2

Customer wants the disc wheels
already delivered with the vehicle
to remain installed.

Hand out new disc wheels to the
customer.
•
•

Enter the campaign in the
Warranty and Maintenance
Logbook.
Invoicing: Scope 1

End of action.
Customer wants the new disc
wheels to be installed.

Replace existing disc wheels with
new disc wheels.
Continue with: ⇒ Technical
Information 'Replace disc wheels with
hub cap'
Dismantled disc wheels can remain
with the customer.
•

Scope 3

Not necessary.

Invoicing: Scope 2

Replace existing hub caps with new
hub caps.
•
•

Enter the campaign in the
Warranty and Maintenance
Logbook.
Invoicing: Scope 3

End of action.
Affected
Vehicles:

Only vehicles assigned to the campaign (see also PCSS Vehicle Information).

Required parts
Parts Info:

The part numbers of the required parts for the respective vehicle can be seen in the assigned scope. For an
overview of the campaign scopes, see: ⇒ Technical Information 'Warranty processing'
For materials required for carrying out the action, see the corresponding Workshop Manual in PCSS. These
lubricants are usually available in the Porsche Center.
For invoicing the necessary material for Scope 2 during the warranty processing, enter Part No.
WSE90000001 with the "Consumables" designation as an additional part costing $5.67 in the warranty
claim.

Jul 10, 2025
Page 2 of 6

AfterSales

Service

Technical Information

2025

ENU

WSE9

4

Required tools
Tools:

•
•

•

P90999 - PIWIS Tester 4
Battery charger with a current rating of at least 90 A and a current and voltage-controlled charge map
for lithium starter batteries, e.g. VAS 5908 - battery charger 90 A. For further information about the
battery chargers to be used, see the corresponding Workshop Manual. ⇒ Workshop Manual '270689
Charge 12 Volt lithium-ion vehicle electrical system battery'
Torque wrench, 40-200 Nm (30-148 ftlb.), e.g. V.A.G 1332A - Torque wrench, 40-200 Nm (30-148
ftlb.)

Replace disc wheels with hub cap - only required for Scope 2
Information
The disc wheels already delivered with the vehicle can remain with the customer.

Work
Procedure:

1
2
3
4
5
6
7
8

Remove wheels.

⇒ Workshop Manual '440519A1 Remove and install wheel'
Remove tires from existing disc wheels.

⇒ Workshop Manual '444019A3 Tyre mounting (remove and install tyres)'
Convert wheel electronics from existing disc wheels to new disc wheels.

⇒ Workshop Manual '443219A1 Remove and install wheel electronics'
Install tires on new disc wheels.

⇒ Workshop Manual '443219A1 Tyre mounting (remove and install tyres)'
Balance wheels.

⇒ Workshop Manual '440594 Balance wheels'
Install wheels.

⇒ Workshop Manual '440519A1 Remove and install wheel'
Teach wheel electronics.

⇒ Workshop Manual '443225A1 Teach wheel electronics'
Enter the campaign in the Warranty and Maintenance Logbook.

AfterSales

Jul 10, 2025
Page 3 of 6

4

Service
WSE9

ENU

Technical Information

2025

Warranty processing
Information
The specified labor times were determined specifically for carrying out this campaign and include all
necessary preliminary and subsequent rework. The labor times can differ from the labor time published in the
Labor Operation List in the PCSS.
Scope 1:

Hand out disc wheels to the customer
•

Customer does not want to install the new disc wheels
Labor time:
Hand out disc wheels to the customer

Labor time: 10 TU

Required parts:
V04015010Q

Alloy wheel
– Front axle, anthracite

2 piece(s)

V04015010R

Alloy wheel
– Rear axle, anthracite

2 piece(s)

9P1601147J TA0

Wheel trim cover
– Alloy wheel, anthracite

4 piece(s)

WHT010187

Metal valve
– Black

4 piece(s)

WHT010183

M5 x 12 internal hexagon round countersunk screw,
self-locking
– Valve

4 piece(s)

WHT010179

Union nut M11 x 0.75
– Black

4 piece(s)

WHT010180

Washer
– Black

4 piece(s)

⇒ Damage number WSE9 066 000 2

Jul 10, 2025
Page 4 of 6

AfterSales

Service

Technical Information
Scope 2:

2025

ENU

WSE9

4

Replace disc wheels
•
•

Customer wants to install the new disc wheels
Dismantled disc wheels can remain with the customer
Labor time:
Replace disc wheels
Includes:
Remove and install wheels
Install tires
Remove and install wheel electronics
Balance wheels

Labor time: 186 TU

Required parts:
V04015010Q

Alloy wheel
– Front axle, anthracite

2 piece(s)

V04015010R

Alloy wheel
– Rear axle, anthracite

2 piece(s)

9P1601147J TA0

Wheel trim cover
– Alloy wheel, anthracite

4 piece(s)

WHT010187

Metal valve
– Black

4 piece(s)

WHT010183

M5 x 12 internal hexagon round countersunk screw,
self-locking
– Valve

4 piece(s)

WHT010179

Union nut M11 x 0.75
– Black

4 piece(s)

WHT010180

Washer
– Black

4 piece(s)

Consumables
– Optimoly TA mounting paste
- Adhesive weights (5 - 90 grams / 0.18 - 3.17 oz)
– Tire mounting paste

1 piece(s)
(for warranty invoicing
only)

Required material:
WSE90000001*

*For invoicing the necessary material during the warranty processing, enter Part No. WSE90000001 with
the "Consumables" designation as an additional part costing $5.67 in the warranty claim.
⇒ Damage number WSE9 066 000 2

AfterSales

Jul 10, 2025
Page 5 of 6

4

Service
WSE9

Scope 3:

ENU

Technical Information

2025

Replace wheel trim cover
•

Vehicles with assigned scope 3 have disc wheels in the correct color installed, only the hub caps must
be replaced due to wrong color
Labor time:
Replace wheel trim cover

Labor time: 19 TU

Required parts:
9P1601147J TA0

Wheel trim cover
– Alloy wheel, anthracite

4 piece(s)

⇒ Damage number WSE9 066 000 2

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are
written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in
order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and
may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins
are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester
are the ones that must be followed.

© 2025 Porsche Cars North America, Inc.

Jul 10, 2025
Page 6 of 6

AfterSales