NHTSA ID Number: 11020555
Manufacturer Communication Number: 37249
TSB/Document Date: 2025-07-09
Summary
This is a Technical Journal: Check Engine Light and DTC - ECM P001792. If VIDA symptom-based fault tracing leads to the replacement of parts, follow method in attachment TJI-531608-1_1_1_en-US 1.pdf
Note! Make sure to follow the correct
sequence during installation.
Remove the screws.
Remove the marked part.
Torque:
Right-hand engine pad to body frame ,
60 Nm
TJ Instruction VCC-531608-1
Page 34 ( 65 )
All vehicles
Special Tool: T9997718, Counterhold
Remove the marked part.
TJ Instruction VCC-531608-1
Page 35 ( 65 )
Note! The component can be reused
unless it has been subjected to abnormal
mechanical stress, damage or oil
contamination.
Lower the engine.
TJ Instruction VCC-531608-1
Page 36 ( 65 )
Note! Note the position of the component
before removal.
Extra information
Caution! Make sure that the component is
positioned correctly.
TJ Instruction VCC-531608-1
Page 37 ( 65 )
Continue the removal following the steps below.
Install the Special tool.
Pull the component in direction of the arrow.
Disconnect the connectors.
Remove the cable harness clips.
TJ Instruction VCC-531608-1
Page 38 ( 65 )
Remove the screws.
Remove the marked part.
Remove the screw.
TJ Instruction VCC-531608-1
Page 39 ( 65 )
Disconnect the connector.
Loosen the clips.
Remove the marked part.
Torque:
Lambda probe, tightening , 45 Nm
TJ Instruction VCC-531608-1
Page 40 ( 65 )
Remove the screws.
Remove the marked part.
Remove the screws.
Disconnect the connectors.
Fold marked part aside.
TJ Instruction VCC-531608-1
Page 41 ( 65 )
Undo the hose from the connection.
Fold marked part aside.
Remove the screws.
Remove the marked parts.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 42 ( 65 )
Extra information
Caution! Make sure that the correct spare
part is being used. See spare part catalogue
to choose correct component.
Apply grease on the area indicated.
Continue the removal following the steps below.
Vehicles early version
Caution! The component must be removed
by hand. Tools may not be used.
Note! Use new seals.
Remove the screws.
Remove the marked parts.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 43 ( 65 )
All vehicles
Note! Use new seals.
Disconnect the connector.
Remove the screws.
Remove the marked parts.
Note! Make sure to follow the correct
sequence during installation.
Note! Use a new seal.
Remove the clips.
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 44 ( 65 )
Note! Use new seals.
Remove the screws.
Remove the marked part.
1.
2.
Torque:
M5 , 5 Nm
Torque:
M6 , 10 Nm
Remove the screws.
Remove the marked part.
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 45 ( 65 )
Remove the Special Tool.
Remove the screws.
Remove the marked part.
TJ Instruction VCC-531608-1
Page 46 ( 65 )
Install the Special tool.
Pull the component in direction of the arrow.
Remove the nut.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-1
Page 47 ( 65 )
Remove the nut.
Torque:
M8 , 24 Nm
Disconnect the connector.
TJ Instruction VCC-531608-1
Page 48 ( 65 )
Remove the screws.
Torque:
M8 , 24 Nm
Remove the screws.
Remove the marked part.
Hint: It may be necessary to twist or turn
the component.
Torque:
M8 , 24 Nm
TJ Instruction VCC-531608-1
Page 49 ( 65 )
Remove the screws.
Remove the marked part.
1.
2.
Torque:
M8 , 24 Nm
Torque:
M10 , 50 Nm
Note! Make sure that the component is
installed.
TJ Instruction VCC-531608-1
Page 50 ( 65 )
Remove the screws.
Torque:
M6 , 10 Nm
Warning! Be prepared to collect escaping
fluid.
Caution! Make sure that the area around
the component is clean and free of foreign
material.
Note! Make sure that a new component is
installed.
Remove the nuts.
Remove the marked part.
Special Tool: T9814129, Hook wrench
Torque:
• Stage 1 : High-Pressure Fuel Line to Fuel
Pump , 18 Nm
• Stage 2 : High-Pressure Fuel Line to Fuel
Pump , 30 Nm
TJ Instruction VCC-531608-1
Page 51 ( 65 )
Release the locks.
Caution! Make sure that the area around
the component is clean and free of foreign
material.
Caution! In order to avoid damage to the
injectors, the part must be carefully pulled
straight up.
Caution! Be extra careful when removing or
installing this component.
Remove the screws.
Remove the part carefully
1.
2.
3.
Torque:
Fuel rail M7 , 22 Nm
Torque:
Fuel rail M8 , 30 Nm
Torque:
M6 , 10 Nm
TJ Instruction VCC-531608-1
Page 52 ( 65 )
Warning! Be prepared to collect escaping
fluid.
Caution! Be extra careful when removing or
installing this component.
Remove the marked parts.
When necessary, perform the following instruction.
Note! Orientation view
Special Tool: T9512943, L-hook
TJ Instruction VCC-531608-1
Page 53 ( 65 )
Caution! In order to avoid damage to the
injectors, the part must be carefully pulled
straight up.
Caution! Be extra careful when removing or
installing this component.
Remove the marked part.
Special Tool: T9512943, L-hook
Replace injector seal , refer to:
Removal, replacement and installation
2 - Engine with mountings and equipment
23 - Fuel system
237 - injector and delivery pipe
Caution! Be extra careful when removing or
installing this component.
Install the marked components.
TJ Instruction VCC-531608-1
Page 54 ( 65 )
Extra information
Caution! Make sure that the mating faces
are clean and free of foreign material.
Caution! Clean carefully, using compressed
air.
Special Tool: T9997505, Cleaning tool
Remove the Special Tool.
TJ Instruction VCC-531608-1
Page 55 ( 65 )
Applies to reassembly of the same component
Note! The component can be reused
unless it has been subjected to abnormal
mechanical stress, damage or oil
contamination.
Caution! The part is to be reused.
TJ Instruction VCC-531608-1
Page 56 ( 65 )
Caution! The part is to be reused.
Continue the removal following the steps below.
Remove camshaft seal , refer to:
Removal, replacement and installation
2 - Engine with mountings and equipment
21 - Engine
215 - transmission
Loosen each bolt 2 turns at a time until all bolts
are removed.
Remove the marked part.
TJ Instruction VCC-531608-1
Page 57 ( 65 )
Vehicles early version
Caution! Note the location of the
component before removal.
Caution! Take extra care when handling the
components.
Remove the marked parts.
Vehicles late version
Caution! Note the location of the
component before removal.
Caution! Take extra care when handling the
component.
Remove the marked parts.
TJ Instruction VCC-531608-1
Page 58 ( 65 )
Cleaning
Caution! Take extra care not to damage the
mating faces.
Caution! Make sure that the oil galleries are
clean and free of foreign material.
Note! Make sure that the mating faces are
clean and free of foreign material.
Use: Putty knife (plastic)
Use: Abrasive cloth
Use: Isopropanol ,
Caution! Take extra care not to damage the
mating faces.
Caution! Make sure that the oil galleries are
clean and free of foreign material.
Note! Make sure that the mating faces are
clean and free of foreign material.
Use: Putty knife (plastic)
Use: Abrasive cloth
Use: Isopropanol ,
TJ Instruction VCC-531608-1
Page 59 ( 65 )
Installation
Use: Engine oil ,
Use: Engine oil ,
TJ Instruction VCC-531608-1
Page 60 ( 65 )
Vehicles early version
Caution! Make sure that the components
are positioned correctly.
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
TJ Instruction VCC-531608-1
Page 61 ( 65 )
Vehicles late version
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
All vehicles
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-1
Page 62 ( 65 )
Caution! Make sure that the components
are positioned correctly.
Install the marked components.
Caution! Make sure that the components
are positioned correctly.
TJ Instruction VCC-531608-1
Page 63 ( 65 )
All vehicles
Note! The component must be installed within 5 minutes of applying the sealant.
Use: Chemical gasket , 1161771
Caution! Make sure that equal pressure is
applied to the full length of the component.
Note! Make sure to follow the sequence
indicated.
Install the marked component.
Install the screws.
Tighten each bolt 2 turns at a time.
Torque:
M7 , 17 Nm
TJ Instruction VCC-531608-1
Page 64 ( 65 )
To install, reverse the removal procedure.
Check
Reinstall the fuse.
Start the engine.
Warning! Make sure that there are no leaks.
TJ Instruction VCC-531608-1
Page 65 ( 65 )
Warning! Make sure that there are no leaks.
Switch off the engine.
Discard of the previously installed fuse and
install a new one.
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 37249
Replacement Service Bulletin Number:
MFR Communication Date: 2025-06-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.