NHTSA ID Number: 11019959
Manufacturer Communication Number: CBR 2435-10 202506
TSB/Document Date: 2025-07-01
Summary
CBR - This CBR solution provides guidelines for ensuring the correct position of battery sensor modules and battery sensor harnesses on the Volvo
VN(4) chassis, as well as the Battery Sensor Diagnostic and Calibration Procedure.
6/30/25, 9:39 AM
Article
Preview Solution CBR-2435-10
Volvo Chassis - Battery Sensor
Diagnostic and Calibration Procedure Model VN (4)
Published 16 June 2025
Valid For
Volvo model VN(4)
Model Year 2025 to current
This CBR solution provides guidelines for ensuring the correct position of battery sensor
modules and battery sensor harnesses on the Volvo VN(4) chassis, as well as the Battery
Sensor Diagnostic and Calibration Procedure.
Battery Sensor Concerns
Problem Observed
Battery Sensor Sub-HW mismatch in Control Unit Data after VMCU
campaign
Missing calibration
Invalid / Incompatible Configuration
Invalid / Incompatible Software Component
What Is Seen In
Calibration Failure / Pro
with x54 and/or x56 and/
x54 - Fault codes – e.g.: C118
54, etc
x56 - Fault codes – e.g.: C118
56, etc
x57 - Fault codes – e.g.: C118
57, etc
Scenario 1: Battery Sensor 24696834 Issues Before/After VMCU
Campaign
Preliminary Checks
Ensure battery voltage is above 20V.
Disconnect any battery charger from the unit before performing battery sensor
calibration.
Inspect all wiring, connectors, PINs, LIN11, and the 3A fuse connected to the
battery sensors before proceeding with further steps.
Procedure
; Live UI
1. Update CCIOM Software:
Ensure the CCIOM program is updated to the latest version.
2. Program and Calibrate Sensor:
1/7
6/30/25, 9:39 AM
Article
Program and then calibrate the existing battery sensor (PN: 24696834).
3. Troubleshoot Calibration Errors:
If a programming or calibration error occurs in Tech Tool:
Disconnect and reconnect the sensor module connector.
Retry programming/calibration.
4. Sensor Replacement (If Necessary):
If Step 3 fails, replace the battery sensor.
Order and install a new battery sensor (PN: 24787102).
If new parts are installed ensure you perform replace hardware
operation (#1700-22-03-12) for CCIOM in PTT. This Ensures correct
part numbers are reported to back office systems and pervent data
mismatch.
5. Final Calibration:
Calibrate the new battery sensor.
Note: Battery Sensor Programming is not required
for PN: 24787102.
Scenario 2: Battery Sensor 24787102 Issues Before/After VMCU
Campaign
Preliminary Checks
Ensure battery voltage is above 20V.
Disconnect any battery charger from the unit before performing battery sensor
calibration.
Inspect all wiring, connectors, PINs, LIN11, and the 3A fuse connected to the
battery sensors before proceeding with further steps.
Procedure
1. Update and Calibrate:
Update the CCIOM program to the latest version.
Calibrate the battery sensor.
2. Troubleshoot Calibration Errors:
If a calibration error occurs in Tech Tool:
Disconnect and reconnect the sensor module connector.
Retry calibration.
3. Sensor Programming (If Necessary):
If Step 2 fails, program the battery sensor and recalibrate.
4. Sensor Replacement (If Necessary):
If Step 3 fails, replace the battery sensor.
Order and install a new battery sensor (PN: 24787102).
5. Final Calibration:
Calibrate the new battery sensor.
Note: Battery Sensor Programming is not required
for PN: 24787102.
; Live UI
Currently programming PN 24787102 will cause calibration to fail.
Do not program until further notice
2/7
6/30/25, 9:39 AM
Article
Note: If you see this message:
Please perform 1700-08-03-33 Function Parameters Reset for the battery.
When asked to select option, the Cold Cranking Amperage (CCA) is not
important, select which type of battery you have. (see pitcure below)
; Live UI
Battery Sensor Module Position
3/7
6/30/25, 9:39 AM
Article
4-Battery Configuration:
Battery Sensor Module 1: Install on the inboard-most set of batteries.
Battery Sensor Module 2: Install on the outboard-most set of batteries.
6-Battery Configuration:
Battery Sensor Module 1: Install on the inboard-most set of batteries.
Battery Sensor Module 2: Install on the middle set of batteries.
Battery Sensor Module 3: Install on the outboard-most set of batteries.
Refer to the image below for detailed positioning of battery sensor modules.
Battery Sensor Identification
PTT Identification
Battery Sensor Module 3, Sensor 1
Battery Sensor Module 3, Sensor 2
Battery Sensor Module 3, Sensor 3
Battery Sensor Module 3, Sensor 4
Battery Sensor Module 3, Sensor 5
Battery Sensor Module 3, Sensor 6
Actual Identification
Battery Sensor Module 1, Sensor 1
Battery Sensor Module 1, Sensor 2
Battery Sensor Module 2, Sensor 3
Battery Sensor Module 2, Sensor 4
Battery Sensor Module 3, Sensor 5
Battery Sensor Module 3, Sensor 6
Post-Correction Operations
After performing any corrections to the battery sensors or their harnesses, the
following operations must be completed:
1. Operation 3113-22-03-01: Programming for all battery sensors.
2. Operation 1700-08-03-33: Calibration for all battery sensors.
Ensure both operations are performed to maintain system integrity and performance.
Harness Label Issues
; Live UI
If harness labels are:
Damaged
Missing
4/7
6/30/25, 9:39 AM
Article
Illegible
Use the following method to determine the correct harness positioning:
1. Use a Multimeter:
Measure the voltage to the code pin of each harness.
Cross-reference the voltage readings with the vehicle’s electrical
schematic to confirm the correct harness position.
Scenario 3: Battery Sensor Modules and/or CCIOM offline.
5/7
6/30/25, 9:39 AM
Article
Battery Sensor Modules and/or CCIOM Offline
1. Turn the Maintenance Disconnect Switch (MDS) off.
2. Unplug each individual battery sensor. (pictured below)
3. Unplug the communication line from the UltraCapacitor. (pictured below)
4. Wait 3 minutes.
5. While waiting, inspect the 3A fuses mounted on the 24V and Ground
bus bars.( pictured below)
6. Reconnect the UltraCapacitor communication line.
7. Reconnect the battery sensors.
8. Turn the MDS on.
9. Run truck for 30 seconds, turn truck off, then return to on pre-run mode.
Check DTC's.
6/7
6/30/25, 9:39 AM
Related links and attachments
No links or attachments available
Article
Share
to others that might find it helpful
Feedback
Give feedback
to help improve the content of this
article
7/7
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-05-30 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: CBR 2435-10 202506
Replacement Service Bulletin Number:
MFR Communication Date: 2025-06-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.