NHTSA ID Number: 11019934
Manufacturer Communication Number: 15-236-18R
TSB/Document Date: 2025-07-01
Summary
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models as listed
•
Always refer to STIS for the latest service information before performing any repairs.
Continued...
Bulletin Number: 15-236-18R; Revised: 06/10/25
Page 21 of 26
“Appendix A”
The following time line and symptom list represents conditions addressed by all previous Harman 3.1
updates including the most current version as described in this bulletin.
Harman Gen 3.1 Software Update Chronology (TSB Number: 15-236-18R)
Update #
Release
Date:
NEW Version
ID #:
Map Update
Software ID #
0
7/1/2018
Rel4.18.11.50
Rel4.18.20.50
Rel_U1.18.20.60
Rel_U0.18.30.20**
1
12/5/2018
Rel_U1.18.38.50
n/a
2
3/18/2019
Rel_UA.19.01.70
Rel_UD.19.17.70**
Revised 15-236-18R, INCLUDES update #1 above and addresses
these additional conditions:
- AM/FM radio station presets are lost.
- Favorite Phone Contacts list is lost.
- previously displayed on SXM screen was changed to (a.k.a. SEEK).
- US State names corrected when using voice guidance.
- Correction made for Pop / Crackling-type sound when using AM
radio.
- Navigation system freezes during loading / start-up.
- Music skips/cuts out while using Apple CarPlay.
- Hands-free feature freezes intermittently while loading.
- Navigation system freezes after entering a particular address using
Voice Recognition.
- The voice guidance volume no longer changes After Ignition Off/On.
Once the Voice Guidance has been muted, the system retains that
setting even after switching the ignition Off/On.
- Invalid Destination Code message appears on the display while
listening to the radio.
- Spanish version FOTA (Firmware Over The Air) translation corrected.
- Mismatch of Speed Limit between Navigation display and the Speed
Limit displayed in the Combination Meter Multi-Function Display
(MFD).
3
8/16/2019
Rel_UE.19.22.70
Rel_UE.19.25.70**
Revised 15-236-18R, INCLUDES updates #1 & #2 above and
addresses these additional conditions:
- The steering wheel satellite controls for the audio/ navigation
system (other than volume control) and the audio/ navigation head
unit hard buttons (other than volume control) may become inoperative
intermittently.
- The setting for scheduling charging will terminate (Only Crosstrek
Hybrid
).
Conditions Addressed:
- Station presets are lost
- Addition of the security enhancement
** NOTE: These Map Update Software I.D. numbers contain the same functional updates as the corresponding New Version I.D.
numbers.
Continued...
Bulletin Number: 15-236-18R; Revised: 06/10/25
Page 22 of 26
Update #
Release
Date:
NEW Version
ID #:
Map Update
Software ID #
4
12/18/19
Rel_UA.19.36.70
Rel_UA.19.42.70**
Rel_UF.20.28.70**
Revised 15-236-18R, INCLUDES updates #1, #2 and #3 above
and addresses these additional conditions:
- Navigation Route Calculation takes too much time.
- SXM Preset Program List is lost.
- Enhanced CD (e-CD) does not play.
- Voice recognition (VR) does not operate correctly.
- When the ignition switch is turned on, music in USB memory goes
back to track #1.
- Phonebook cannot be downloaded from a connected smart phone.
- When the ignition switch is turned on, a message of ‘Invalid
Destination Code’ is displayed.
- When using voice recognition for route searching, the state name is
recognized wrong.
- When MOTA (Map update Over The Air) is conducted, the map
display goes blank (white) temporarily. In case the customer
terminates the MOTA when in this condition, the map stays blank
(white). See NOTE 1 below.
- Hands Free conversation volume not loud enough compared to the
audio volume (unfavorable balance). See NOTE 2 below.
-Added function for SXM Weather Alert setup. See NOTE 3 below.
5
12/21/2020
Rel_UA.20.38.70
Rel_UA.20.41.70
Rel_UH.21.13.70
Rel_UA.21.41.70**
Rel_UA.22.05.45**
Revised 15-236-18R, INCLUDES updates #1 - #4 above and
addresses these additional conditions:
- Radio station information does not appear.
- Activation Code Not Accepted by Navigation System when updating
Map Data
- For 19MY NAVI models, the map data update over the air (MOTA)
is available using a mobile phone with the STARLINK App installed.
For 20MY models, this function was incorporated at the start of
production.
- If of over 1000 addresses are stored in Phonebook, some part of
Phonebook cannot be downloaded to the Head Unit.
- When reading out SMS (Short Message Service or text message) in
CarPlay, the voice breaks up or words are incorrectly pronounced.
- On push-button start models, the word “key fob” is deleted from
the note that appears when the operation setting of Rear Gate Unlock
Button is selected. (Rear Gate equipped models only.)
- When the iPhone is disconnected while playing music through the
CarPlay function, the music source is no longer selected automatically
(instead of automatically changing to RADIO.)
- When an iPhone (CarPlay allowed) is connected using USB, the
system moves to CarPlay screen no matter what is set in the menu in Setting. The Setting menu of
is applicable only on Android Auto.
- Repair Facility POI Icons are now shown on the NAVI map display.
See 2-1-4 for details.
Conditions Addressed:
Continued...
Bulletin Number: 15-236-18R; Revised: 06/10/25
Page 23 of 26
Update #
Release
Date:
NEW Version
ID #:
Map Update
Software ID #
6
7/27/2021
Rel_UH.20.52.70
Rel_UA.21.41.70**
Rel_UA.22.05.45**
Conditions Addressed:
Revised 15-236-18R, INCLUDES updates #1 - #4 above and
addresses these additional conditions:
- Minor hardware (GPS module supplier) change on SBR / SIA
production line.
NOTE:
1. The new version software is installed ONLY at the production line,
and NOT released as USB or FOTA update.
2. The Navi Head Unit part number does not change due to this
software update.
3. The functionality of the Head Unit is not affected by this software
update.
4. The above change will be implemented to production line from the
beginning of April 2021 production at SIA and the end of April 2021
production at SBR.
7
8/12/2022
Rel_UG.22.13.70
Rel_UG.22.39.70**
Revised 15-236-18R, INCLUDES updates #1 - #6 above and
addresses these additional conditions:
1)
No Audio when HK AMP is installed (added fail-safe function to
reset the external Harman Kardon amplifier in case of no sound
failure)
2)
Volume setting becomes inoperative
3)
Buzzing Noise following Head Unit reboot (CarPlay is reset with
noise)
4)
Head Unit is stuck in phone mode following completion of the
call
5)
Multiple audio sources are playing simultaneously
6)
Noise (random interruption) on AM radio
7)
Bluetooth handsfree call disconnect using iPhone
8)
Re-route search in Faster Route mode does not work
9)
is not shown completely in the pop-up menu
for Paid Map License Renewal
10) Voice recognition address search does not work in some states
in Mexico
Continued...
Bulletin Number: 15-236-18R; Revised: 06/10/25
Page 24 of 26
Update #
Release
Date:
NEW Version
ID #:
Map Update
Software ID #
8
5/10/2023
Rel_UK.22.49.70
Rel_UL.23.13.70 **
Conditions Addressed:
Revised 15-236-18R, INCLUDES updates #1 - #7 above and
addresses these additional conditions:
1)
Message “DCM FOTA In Progress” is displayed following IGN-ON
2)
Loss of Bluetooth pairing or difficulty connecting
3)
Music played via Bluetooth device is lost (skipped or
interrupted), when Apple Watch is being connected
4)
If multiple phones (phone A and phone B) are connected
via Bluetooth and phone A is playing music while phone B’s
registration is deleted, than phone A’s registration can’t be
deleted
5)
Android Auto does not launch
6)
When playing music with Android Auto, the sound or volume
control is lost
7)
Android Auto does not launch automatically using Android phone
connected prior to stopping CarPlay operation due to iPhone
disconnection
8)
CarPlay does not launch, after iPhone is connected
9)
Clock setting changes on its own, when the time is set in
manual mode
10) License confirmation logic improvement in Map Update process
11) USB Hub (AUX USB port) Reset function. Please follow TSB 15314-23 as well to confirm proper hardware is installed*
* Please follow TSB 15-314-23 to confirm proper hardware
is installed
9
12/15/2023
Rel_UK.23.16.70
Rel_UK.23.42.70**
Rel_UM.24.08.70**
Revised 15-236-18R, INCLUDES updates #1 - #8 above and
addresses these additional conditions:
1)
Error message appears and Android Auto does not start when
connected via USB cable
2)
No response to the operation on Android Auto screen
3)
Screen freezes while using Android Auto
4)
When an IGN cycle is performed while using Android Auto, the
registered phonebook is grayed out and phonebook favorites
disappear
5)
CarPlay widget is displayed on the taskbar when CarPlay is
launched, but the CarPlay icon is not displayed on the Home
screen
6)
Expansion of data storage for MOTA (data size limit per region
for MOTA is extended from 2 GB to 2.3 GB)
7)
Unable to play News on Google Assist
Continued...
Bulletin Number: 15-236-18R; Revised: 06/10/25
Page 25 of 26
Update #
Release
Date:
NEW Version
ID #:
10
11/8/2024
Rel_UK.24.09.70
Map Update
Software ID #
Conditions Addressed:
Revised 15-236-18R, INCLUDES updates #1 - #9 above and
addresses these additional conditions:
1)
11
06/16/2025
Rel_UK.25.04.70
This software update was solely prepared to renew the
electronic certificate programmed in the head unit to enjoy Map
update Over the Air (MOTA) service.
Revised 15-236-18R, INCLUDES updates #1 - #11 above and
addresses these additional conditions:
1) No sound from AM/FM radio.
2) Delay in AM/FM radio sound.
** NOTE: These Map Update Software I.D. numbers contain the same functional updates as the corresponding New Version I.D.
numbers.
NOTE 1: The MOTA operation is performed in two steps, i.e., Downloading (download the map data to the H/U via Wi-Fi) and
Overwriting (replace the map data to new one inside the H/U.) Before updating the software to Ver. 6, the map screen turns blank (white)
during the Downloading process until it is completed. If the customer stops (by turning off the H/U,) during the Downloading process, the
map display will stay in blank condition. The MOTA operation can be restarted even in this condition. After the Ver. 6 software is installed,
the map does not turn to blank (white) during Downloading. However, the map still turns to blank (white) during the Overwriting process,
which is a normal operating characteristic.
NOTE 2: To meet with customer expectations, Ver. 6 software will increase the Hands-Free conversation volume by 6dB against the
base audio volume. Customers will now be able to hear Hands Free conversation volume which used to be at audio volume level 30
at level 22 after installing this update. If the customer prefers the original Hands-Free conversation volume setting, it can be manually
adjusted by following: Home >> Settings >> Sound Tab >> Phone Volume >> then lowering the volume 6 - 8 steps.
The base audio volume setting chosen at the Factory Data Reset is at level 22 compared to the previous setting, which is level 30. (This
means customers will no longer have to adjust the base audio volume to get
comfortable Hands-Free conversation volume.)
NOTE 3: Added function for SXM Weather Alert is only applicable to HIGH grade head unit.
Bulletin Number: 15-236-18R; Revised: 06/10/25
Page 26 of 26
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-236-18R
Replacement Service Bulletin Number:
MFR Communication Date: 2025-06-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW
/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year. - Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




