NHTSA ID Number: 11019747
Manufacturer Communication Number: LI46.15-P-063353
TSB/Document Date: 2025-06-26
Summary
Complaint Height adjustment of electric steering column adjustment jammed in the top/bottom adjustment position (e.g. with Easy Entry function), noise (breakaway noise) when leaving the limit stops of the height adjustment. Cause Height adjustment moves to the top/bottom limit stop and jams. 1. Driver seat control unit software 2. Steering column height adjustment transmission Remedy There are 2 repair procedures to follow depending on vehicle (differentiated according to model and vehicle manufacturing date) 1. Perform software update of driver's seat control unit 2. Replace repair kit for steering column height adjustment Procedure 1: Perform software update of driver seat control unit. ALL models except 205/253/293/222/217/231/463/213/238/257/290 up to special equipment code 801. • Move out the fore/aft adjustment to the end position. • Release jamming of height adjustment by knocking with palm of hand onto top of steering wheel/at the same time pressing adjustment switch downward • After releasing the jam, perform a software update of the driver's seat control unit If procedure 1 is not effective, there is no new software available for the driver seat control unit, or the chassis is not listed above (167, 223, 294, 206, 294, 295, 296, 297,232,214,254) then use procedure 2. Procedure 2: Replace repair kit for steering column height adjustment. • Move out the fore/aft adjustment to the end position. • Release jamming of height adjustment by knocking with palm of hand onto top of steering wheel/at the same time pressing adjustment switch downward • Remove footwell trim on driver's side. • Determine type version of height adjustment in XENTRY Parts Information and order appropriate replacement part (refer to attachment). 1. Version A: A 231 460 77 00 2. Version B: A 205 460 38 03 • Remove steering column. • Remove height adjustment (adjustment repair kit). • Install repair kit (adjustment repair kit) (observe tightening torque for screws in attachment). • Install steering column. • If possible, flash driver seat control unit to latest software release or code SCN again. • Commission driver seat control unit (normalization of limit stops is deleted and learning process repeated).
Height adjustment of electric steering column adjustment jammed
Topic number
LI46.15-P-063353
Version
18
Function group
46.15 - Steering column adjustment
Date
6/9/25
Validity
Model 167
Model 205
Model 213
Model 223
Model 238
Model 253
Model 257
Model 290
Model 293
Model 463
Model 222
Model 217
Model 231
Model 206
Model 294
Model 295
Model 296
Model 297
Model 232
Model 214
Model 254
Reason for change
Verbiage
Complaint
Height adjustment of electric steering column adjustment jammed in the top/bottom adjustment position (e.g. with Easy Entry function), noise (breakaway noise) when leaving the limit stops of the height adjustment.
10.06.2025 18:12
© Copyright Mercedes-Benz
AG
CCUSHWA
Page 1 / 3
Cause
Height adjustment moves to the top/bottom limit stop and jams.
1.
2.
Driver seat control unit software
Steering column height adjustment transmission
Remedy
There are 2 repair procedures to follow depending on vehicle (differentiated according to model and vehicle manufacturing date)
1.
2.
Perform software update of driver's seat control unit
Replace repair kit for steering column height adjustment
Procedure 1: Perform software update of driver seat control unit.
ALL models except 205/253/293/222/217/231/463/213/238/257/290 up to special equipment code 801.
•
•
•
Move out the fore/aft adjustment to the end position.
Release jamming of height adjustment by knocking with palm of hand onto top of steering wheel/at the same time pressing adjustment switch downward
After releasing the jam, perform a software update of the driver's seat control unit
If procedure 1 is not effective, there is no new software available for the driver seat control unit, or the chassis is not
listed above (167, 223, 294, 206, 294, 295, 296, 297,232,214,254) then use procedure 2.
Procedure 2: Replace repair kit for steering column height adjustment.
•
•
•
•
1.
2.
•
•
•
•
•
•
Move out the fore/aft adjustment to the end position.
Release jamming of height adjustment by knocking with palm of hand onto top of steering wheel/at the same time pressing adjustment switch downward
Remove footwell trim on driver's side.
Determine type version of height adjustment in XENTRY Parts Information and order appropriate replacement
part (refer to attachment).
Version A: A 231 460 77 00
Version B: A 205 460 38 03
Remove steering column.
Remove height adjustment (adjustment repair kit).
Install repair kit (adjustment repair kit) (observe tightening torque for screws in attachment).
Install steering column.
If possible, flash driver seat control unit to latest software release or code SCN again.
Commission driver seat control unit (normalization of limit stops is deleted and learning process repeated).
Attachments
File
Description
Nm.pdf
Bolt tightening torque, adjustment repair kit
Lenksäulenverstellung.pdf
Overview of versions, RS adjustment
Disclaimer
10.06.2025 18:12
© Copyright Mercedes-Benz
AG
CCUSHWA
Page 2 / 3
NOTE: The information contained in this document is intended for use by trained, professional technicians with the
knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz
vehicles, using Mercedes-Benz![]()
approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and
provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect
is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a
symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes
resulting in the same or similar symptoms or conditions described in this document, and trained professional service
technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained
in this document does not guarantee warranty coverage nor does it extend the vehicle’s warranty in any way.
Symptoms
Chassis/suspension > Steering system > Steering column adjustment > Malfunction
Chassis/suspension > Steering system > Steering column adjustment > Does not adjust longitudinally
Chassis/suspension > Steering system > Steering column adjustment > Does not adjust in height
Chassis/suspension > Steering system > Steering column adjustment > Adjusts without obvious cause
Parts
Part number
ES1 ES2 Designation
Quantity Note
EPC
A2314607700
Adjustment repair kit
1
Version A
X
A2054603803
Adjustment repair kit
1
Version B
X
Operation numbers/damage codes
Op. no.
Operation text
10.06.2025 18:12
© Copyright Mercedes-Benz
AG
Time
CCUSHWA
Damage
code
Note
46281H2
Transmission of steering column adjustment jams
Page 3 / 3
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LI46.15-P-063353
Replacement Service Bulletin Number:
MFR Communication Date: 2025-06-09
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STEERING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【Looking for More Professional Vehicle Scan Tool?】iCarsoft E660 2026 Upgrade Version OBD2 scan tool can do it all-reads and clears trouble codes on Engine system, ABS system, Transmission system and Airbag system, And with 6 reset function. It covers more than 59 vehicle makes from 1996-2023 models ( included most USA/ Asia / EU vehicle brand) with full OBDII. (As every car model has its-owned specific car system and ECUs, not all car models have full car ECUs which may prevent the scanner from performing all listed system diagnostics or reset services. Therefore, please email to us with car VIN and services required to do scanner's services for a compatibility check before purchasing.)
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E660 2026 Upgrade Version diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan Engine system. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E660 2026 Upgrade Version adopts unique diagnostic software, works well for most Porsche
, Benz, BMW
, US Ford
, Land Rover
, Jaguar
, Audi
, VW
, Volvo
, Honda
, Nissan
, Infiniti
, Toyota
, Lexus
, Scion
, Isuzu
, Hyundai
, Kia
, Daewoo, Mazda
, Sprinter
, Mini
, Seat, Skoda, SAAB
, EU Ford
, Holden, AUS Ford
, Acura
, Subaru
, Mitsubishi
, Dacia, Renault, Fiat
, GM, Chrysler
, Citroen, Peugeot, Opel, Smart,Suzuki
, Vauxhall, Alfa-Romeo, Lancia and etc. - 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is a diagnostic tool that offers professional maintenance services, including Oil Reset, EPB, BMS, ETC, SAS, TPMS Reset. It can help you easily reset oil change indicators, recalibrate steering angle sensors, relearn replaced electric parking brake and so on. For optimal vehicle performance and maintenance convenience. (Tips: Please update the softwareafter receiving the product to obtain new service functions)
- 【118+ Real Time Record & Live Graph View】iCarsoft E660 2026 Upgrade Version can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. 15 languages: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage.
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi
/ VW
/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery
, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has) - REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW
/MINI
/RollsRoyce / Audi
/VW
/Seat/Skoda/Bentley
/Bugatti
/Lamborghini
, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- 【WHY CHOOSE CR PRO+】COST-EFFECTIVE BIDIRECTIONAL OBD2 SCANNER, COST 80 LESS THAN CR MAX, WITH THE SAME maintenance services as CR MAX, 49 Reset + 46 Brand-Specific services & ECU coding( for AU DI/BM W/ V W ONLY), OEM-level active tesing, multi-systems diagnostic(More than 4 basic systems), powerful full OBD2 functions. 2.0 GHz 4 core CPU, 16GB memory .Warm Tip: Some car models with FCA
gateways, causing scanners failed diagnostic, please contact us for additional FCA
adapter (please check the details in the following description) - 【CONTACT US TO CONFIRM 】Few models need a special adapter cable, which will be available soon, please contact us for check if you are the following models: (2018&later) for Chrysler
: 300, Great Jetdragon; for Dodge
: Challenger
, Warhorse, Durango, Cooley, Rams 1500, Rams 2500, Rams 3500, Rams 4500, Rams 5500; for JEEP
: Grand Cherokee, Free Man, New Wrangler (JL), Grand Commander. (2019&later) for JEEP
: Free Light, Compass. (2020&later)for JEEP
: Gladiator. (2018&later) for Alfa Romeo
: GIULIA; for Fiat
: 500L, 500X, 500, Novo Uno fl, Toro. (2018&later) for Maserati
. CONTACTING US FOR FCA
GATEWAY ADAPTER. - 【Bidirectional Test Covers 180,00+ vehicles】The CR Pro+ offers extensive actuator coverage, up to 9981 tests for AUDI
A4, 4117 tests for Land Rover
, 7092 tests for VW
0B-Magotan, 60776 tests for GM Chevrolet
, 24611 for Benz S221, 3744 for Porsche
, 114 for BMW
. Beyond sending commands to basic control-units like headlights, mirrors, A/C clutches, fans, windows, doors and more, CR Pro+ CR Pro+ perform real-time bidirectional control with deeper ECU access, such as complex sensor or electronic responses or inner unit like fuel pump, injector, ignition coil, main relay, transmission coolant valve to catch potential issues. It enables you quickly locate the faults, avoid needless pa r.t swap. - 【COST-EFFECTIVE 49 RESET SERVICE】iCarsoft Pro+features all Reset/ Adaptation/ Calibration/ Initialization service including ABS Reset/ Oil Reset/ EPB Reset/ ETC Reset/ INJ Reset/ SAS Reset/ BLD Reset/ BMS Reset/ LAP Reset/ SPS Reset/ TPMS Reset/ACS Reset/ AFS Reset/ FPP Reset/ IDL Reset/ BSC Reset/ Door Reset/ Seat Reset/ TCM Reset/ Service Interval Reset/ Brake Reset/ DWR Reset/ ECM Reset etc. IMPORTANT: CR PRO+ has been upgraded to provides numerous car maintenance functions for maintaining car systems/control units outside the systems corresponding to the above functions (in miscellaneous). NOTE:Above services vary by vehicle models, please contact us for the service list for your cars.
- 【OE MULTI-SYSTEMS DIAGNOSTICS】CR Pro+ can diagnose main vehicle systems like Engine, TCM, ABS, Airbag, Brake, BMS, Battery, windows, etc,AND ALSO diagnose vehicle specific systems like Antenna Module / Communication Control Module/ Parking Lock/Voice Control/ AC Reducing Agent Metering System,etc, helping to detect existing faults and potential faults, giving you complete vehicle health analysis. It displays module Info, real-time data graphs, such as transmission temperature, saves freeze frames to pinpoint intermittent faults. Note: Available systems vary by model. Each car model has unique systems. You can contact us for diagnoseable systems of your vehicle.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




