Loading...

NHTSA ID Number: 11018924

Manufacturer Communication Number: Circular 26OB

TSB/Document Date: 2025-06-03


Summary

In affected vehicles it is possible that a faulty exhaust pressure sensor may impact tailpipe emissions. To address this issue, the exhaust pressure sensor will be replaced on affected vehicles


Emissions Service Action
Code: 26OB
Subject
Document History
Affected Vehicles

Exhaust Pressure Sensor

Date
05/20/2025

Country
USA
USA
CAN
CAN

Summary
Original publication

Beginning
Model Year
2025
2025
2025
2025

Ending
Model Year
2025
2025
2025
2025

Vehicle

Vehicle Count

JETTA
TAOS
JETTA
TAOS

19
9
63
242

Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.

About this service
action:
Code Visibility

Campaign status must show “open.”

If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.

In affected vehicles it is possible that a faulty exhaust pressure sensor may impact tailpipe
emissions. To address this issue, the exhaust pressure sensor will be replaced on affected
vehicles.
On or about May 20, 2025, the campaign code will be applied to affected vehicles.

Owner Notification

Owner notification will take place in May 2025. Owner letter examples are included in this
bulletin for your reference.

Additional Information

Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 1 of 10

Parts Information
Criteria

01

Quantity

1

Initial Allocation:
NO

Part Number

05E-906-277-A

P.O.C. Part Description

Ordering Method

PRESSSENS

Reference POC
comments individually by
part number, or in the
POC Campaign List

There will be no parts allocation.

NOTE
Your dealer’s Estimated Remaining Repairs by campaign can be found in Parts on Command.
Click on “View Campaign List” and review the Estimated Remaining Repairs column.
NOTE
Campaign parts should always be ordered as per the parts information in this circular. The ordering system will
supersede the part, if applicable.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 2 of 10

Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the ELSA screen print showing action open on the day of repair to the repair order.
If a customer declines campaign work, refer to the “Customer Declines Campaign/Update Repair” section in the
Campaign/Update Policy and Procedures Manual.
Service Number
Damage Code
Parts Vendor Code
Claim Type

26OB (letter O, not number zero)
0099
WWO
Sold vehicle: 7 10
Unsold vehicle: 7 90

Causal Indicator
Vehicle Wash/Loaner

Mark PRESSSENS* as causal part
Do not claim wash/loaner under this action.
Loaner/rental coverage cannot be claimed under this action. However, loaner/rental
may be covered under the current loaner/mobility program. Please refer to the
VolkswageneBay logo Warranty Policy and Procedures Manual for loaner claims information and
reimbursement details.

Criteria I.D.

01

LABOR
Labor Op

Time Units

2675 55 45

SEE ELSA

Description
Pressure sensor replace

Add only if MIL was illuminated and fault P0471 was stored
2706 89 50

SEE ELSA

Battery Charge

0150 00 60

Time stated on
diagnostic protocol

GFF/Guided functions
(clear fault memory)

PARTS
Quantity

Part Number

Description

1.00

05E906277A

PRESSSENS*

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 3 of 10

Customer Letter Example (USA)

This notice applies to your vehicle: ,
Subject: Emissions Service Action 26OB – Exhaust Pressure Sensor
Dear VolkswageneBay logo Owner,
In cooperation with the United States Environmental Protection Agency and the California Air Resources Board, we are
informing you of our decision to conduct an emissions service action on certain 2025 model year VolkswageneBay logo vehicles.
Our records show that you are the owner of a vehicle affected by this action.
About this service action:
In affected vehicles it is possible that a faulty exhaust pressure sensor may impact tailpipe emissions. To address this
your authorized VolkswageneBay logo dealer will replace, the exhaust pressure sensor at no cost to you. This work will take about
an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need
additional time for the preparation of the work, as well as to accommodate their daily workshop schedule.
IMPORTANT! Please note that if any control module(s) in your vehicle has been “chipped,” “tuned,” or otherwise
modified from factory specifications with aftermarket components and/or software, work needed to repair,
replace, or return the control module(s) to factory specifications is NOT covered under this action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized VolkswageneBay logo dealer as soon as possible to
schedule this work. To set up an appointment online, please visit www.vw.com/find-a-dealer.
Additional Information

If you are the lessor and registered owner of the vehicle identified in this action, please forward this letter
immediately via first-class mail to the lessee within ten (10) days of receipt.

If your authorized VolkswageneBay logo dealer fails or is unable to complete this work free of charge within a reasonable
time, if you have changed your address or no longer own the vehicle identified in this letter, or if you should
have any questions about this communication, please reach out to us using your preferred method of
communication at www.vw.com/contact or by calling us at 800-893-5298.

To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit
www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN) into the Recall/Service
Campaign Lookup tool.

We apologize for any inconvenience this matter may cause; however, we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
VolkswageneBay logo Customer Protection

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 4 of 10

Customer Letter Example (CANADA)

This notice applies to your vehicle: ,
Subject: Emissions Service Action 26OB – Exhaust Pressure Sensor
Dear VolkswageneBay logo Owner,
This notice is sent to you in accordance with the requirements of the Canadian Environmental Protection Act, 1999.
VolkswageneBay logo has determined that a defect, which relates to a prescribed emission standard, exists in certain 2025 model
year VolkswageneBay logo vehicles. Our records show that you are the owner of a vehicle affected by this action.
About this service action:
In affected vehicles it is possible that a faulty exhaust pressure sensor may impact tailpipe emissions. To address this
your authorized VolkswageneBay logo dealer will replace, the exhaust pressure sensor at no cost to you. This work will take about
an hour to complete and will be performed for you free of charge. Please keep in mind that your dealer may need
additional time for the preparation of the work, as well as to accommodate their daily workshop schedule.
On or about May 20, 2025, the necessary repair instructions and parts (if applicable) will be available to your authorized
VolkswageneBay logo dealer.
IMPORTANT! Please note that if any control module(s) in your vehicle has been “chipped,” “tuned,” or otherwise
modified from factory specifications with aftermarket components and/or software, work needed to repair,
replace, or return the control module(s) to factory specifications is NOT covered under this action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized VolkswageneBay logo dealer as soon as possible to
schedule this work.
Additional Information

If you are the lessor and registered owner of the vehicle identified in this action, please forward this letter
immediately via first-class mail to the lessee within ten (10) days of receipt.

If your authorized VolkswageneBay logo dealer fails or is unable to complete this work free of charge within a reasonable
time, if you have changed your address or no longer own the vehicle identified in this letter, or if you should
have any questions about this communication, please contact Customer Relations, Monday through Friday from
8AM to 8PM EST by phone at 1-800-822-8987 or via our “Contact Us” page at www.vw.ca.

We apologize for any inconvenience this matter may cause; however, we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
VolkswageneBay logo Customer Protection

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 5 of 10

Repair Overview

Replace G450 Exhaust Pressure Sensor.

NOTE

These repair instructions may differ from the labor operations and labor times listed in ELSA.

Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.

This procedure must be read in its entirety prior to performing the repair.

Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not
identically match all affected vehicles.

Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.

When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate
inside the shop to avoid temperature-related component damage/breakage.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 6 of 10

Required Tools

Socket – 24mm
-T40284(or equivalent)

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 7 of 10

Repair Instruction
Section A - Check for Previous Repair
TIP
If Campaign Completion label is present, no further work is required.

Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.

TIP
On the date of repair, print this screen and keep a
copy with the repair order.

Confirm the Campaign/Action is open . If the status is closed, no further work is
required.

Note the Applicable Criteria ID for
use in determining the correct work to be done
and corresponding parts associated.
CRITICAL REPAIR STEP

STOP!
All campaigns/actions with a repair available must
be performed in order of the Start date .
The oldest should be performed first (unless
otherwise noted in the repair instructions).
Proceed to Section B

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 8 of 10

Section B – Repair Procedure
NOTE
The condition addressed by this campaign may cause the MIL to illuminate and fault code P0471 – “exhaust pressure
sensor implausible signal” to be stored.
Replace G450 exhaust pressure sensor:

Replace the G450 exhaust pressure sensor
per the ELSA repair manual:
o

Repair manual > Engine > 4-Cylinder
Direct Injection 1.5L 4V, EA 211 evo2
Engine, Turbocharger > 24 Multiport
Fuel Injection > Sensors > Exhaust
Pressure Sensor 1 G450, Removing
and Installing.

Part Number

Part Description

05E-906-277-A

Pressure sensor

Perform the following only if the vehicle arrived
with the MIL illuminated and fault P0471 is
found to be stored:
o

Scan the vehicle using GFF.

o

Clear the fault memory.

o

Send the diagnostic protocol online
when exiting ODIS.

Proceed to Section C

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 9 of 10

Section C – Campaign Completion Label
Install Campaign Completion Label

Fill out and affix Campaign Completion
Label, part number CAMP 010 000, next to
the vehicle emission control information
label.

TIP
Ensure Campaign Completion Label does not cover
any existing label(s).
Proceed to Section D

Section D - Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local
requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S. and
the Part Destruction and Core Disposition Report for Canada.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized VolkswageneBay logo dealer. 2025 VolkswageneBay logo Group of America, Inc. and VolkswageneBay logo Canada. All Rights Reserved.
26OB Page 10 of 10

1

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
SaleBestseller No. 2
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
  • 【FOR END USER & DIYERS】 This error code reader AL319 is...
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...

Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API


 

If the PDF is very large, it may not load in the preview below.

Download PDF [390.45 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: Circular 26OB

Replacement Service Bulletin Number:

MFR Communication Date: 2025-05-20

MFR Internal Campaign ID/Software Version: 26OB

Communication Type: Service Campaign

NHTSA Components: UNKNOWN OR OTHER

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
Bidirectional OBD2 Scanner Diagnostic Tool VDIAGTOOL D200, Bluetooth Scan Tool-Lifetime Free Updates, 26 Resets (Unlockable 49+), Full System Car Code Reader for iOS & Android, FCA AutoAuth & CAN-FD
  • 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrideBay logo cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility.
  • 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
  • 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMWeBay logo, for AudieBay logo, for GM, for FordeBay logo and more. Note:D200 does‘t provide any OE software.
  • 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
  • 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
SaleBestseller No. 2
VDIAGTOOL VD10 OBD2 Scanner Code Reader Car Diagnostic Tool Engine Fault Code Reader for Turn Off CEL with Freeze Frame/I/M Readiness for All OBDII Protocol Cars, OBD2 Scanner Diagnostic Tool
  • 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
  • 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
  • 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
  • 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
  • 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
SaleBestseller No. 3
Bidirectional Scan Tool VDIAGTOOL VD70S, 2026 Wireless OBD2 Scanner Diagnostic Tool with 36+ Resets, All System Scanner for Car, FCA Autoauth, CAN FD & DoIP, ECU Coding, PMI, 3 Years Update
  • Pro Features, Home Mechanic Budget: Why pay thousands for factory scan tool? The VD70S scan tool delivers advanced professional diagnostic at an affordable price, including 10x faster 33-66ft wireless scanning, 4000+ active tests, 36+ hot services, ECU coding, PMI function, and OE-level full-system scan with 8-in-one data graph. It rivals expensive shop tools - perfect for DIYer, technician and small shop. Get dealer-grade power without the cost - the VD70S obd2 scanner diagnostic tool makes pro diagnostic accessible to all. The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase
  • Full Bidirectional Control for Precision Repair: VD70S obd2 scanner gives you direct vehicle module control to test components like fuel pump, injector, A/C clutch, window and more, enabling you to accurately and quickly locate faulty components. Unlike basic obd2 code reader, our advanced bidirectional control lets you actively command system - like triggering the ABS pump to confirm your fix worked. With pinpoint component testing and real-time validation, you can diagnose intermittent issues faster and prevent costly return visits. The VD70S auto diagnostic scanner transforms complex diagnostic into precise, time-saving repair - giving professional-grade accuracy at an unbeatable value
  • 33-66FT Wireless Freedom - Faster & More Stable: Say goodbye to 2M cable limits. Easily Perform bi-directional tests like folding mirror, activating light or fuel pump while walking freely around your vehicle - no more cable dragging or repositioning your tool. Unlike other 33ft BT obd2 scanner that still need a cable to handle DOIP vehicle diagnostics, the VD70S bidirectional scan tool delivers a truly cable-free experience - with up to 66ft stable transmission range and faster, more reliable data transfer. With VD70S scanner, you get pro-level flexibility, faster workflow and stable diagnostics without cable clutter or wireless dropouts
  • Powerful & Affordable Auto Scanner with 36+ Special Functions: Take control of your vehicle maintenance and save hundreds in shop fees with the VD70S car diagnostic tool. This car tool performs 36+ hot services including ✔Crank Sensor Relearn, Oil Reset, EPB, TPMS Reset, Throttle Adaptation, Injector Coding, ABS Bleed and more. ✔Besides, the VD70S bidirectional obd2 scanner unlocks 100+ advanced vehicle-specific functions under specific system menu, including Idle Relearn, VIN Write, Crankshaft Sensor Relearn, Fuel Trim Reset, ABS Initialization and more. These features help you solve complex system error and restore optimal vehicle performance. Text us your VIN we’ll check the compatibility
  • OE-Level Full System Diagnostic, Simplified Workflow: The VD70S car diagnostic scanner delivers OE-level full system scanning (ABS/ECM/BCM/SRS/TCM and more) without the dealership cost. ✔Easily view 8 live data streams, retrieve freeze frame and run active test to quickly identify problem. ✔With advanced bidirectional control, test components like fuel injector and sensor directly to verify repair with certainty. ✔The 8-in-one graphing tracks performance trend to catch intermittent issue like a pro. Whether you're a technician or car owner, the diagnostic scanner provides shop-quality diagnostic to optimize performance and prevent costly repair - all in one affordable tool

Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...