NHTSA ID Number: 11018915
Manufacturer Communication Number: 09-136-25R
TSB/Document Date: 2025-06-03
Summary
This bulletin announces the availability of reprogramming files for the Engine Control Module (ECM). This logic was developed to address the following Diagnostic Trouble Code (DTC): P062F - Internal Control Module EEPROM Error. If DTC P062F is detected by the ECM, perform the reprogramming procedure outlined in this bulletin.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2025 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY:
SUBJECT:
2023-25MY Legacy & Outback
2023-25MY WRX
2023-25MY Ascent
NUMBER:
09-136-25R
DATE:
03/17/25
REVISED:
05/29/25
Reprogramming Files for DTC P062F
INTRODUCTION:
This bulletin announces the availability of reprogramming files for the Engine Control Module
(ECM). This logic was developed to address the following Diagnostic Trouble Code (DTC): P062F
- Internal Control Module EEPROM Error. If DTC P062F is detected by the ECM, perform the
reprogramming procedure outlined in this bulletin.
PRODUCTION CHANGE INFORMATION:
The reprogramming files have been incorporated into vehicle production as per the table below.
Model
Starting VIN
Legacy
S3210743
Outback
S3016774
WRX
S8802485
Ascent
S3422933
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 09-136-25R; Revised: 05/29/25
Page 1 of 4
PFC FILE INFROMATION:
MY
Model
Legacy / Outback
Outback Wilderness
File Description
Specification
Old Part #
New CID #
2.4L Turbo, CVT
22765AS460
22765AS461
22765AS462
22765AS463
22765AS464
LHBK400Gy0G
22765AS475.pfc
2.4L Turbo, CVT
22765AS470
22765AS471
22765AS472
22765AS473
22765AS474
LHBK400Hy0G
22765AU003.pfc
2.4L Turbo, CVT
22765AU000
22765AU001
22765AU002
LHBKC50Ny0G
22765AU013.pfc
2.4L Turbo, 6MT
22765AU010
22765AU011
22765AU012
LHBKC50My0G
LHBK400Yy0G
22765AS465.pfc
2023
WRX
Ascent
22765AS634.pfc
2.4L Turbo, CVT
22765AS630
22765AS631
22765AS632
22765AS633
Legacy / Outback
22765AT833.pfc
2.4L Turbo, CVT
22765AT830
22765AT831
22765AT832
LHBKH00Gz0G
Outback Wilderness
22765AT843.pfc
2.4L Turbo, CVT
22765AT840
22765AT841
22765AT842
LHBKH00Hz0G
22765AU381.pfc
2.4L Turbo, CVT
22765AU380
LHBP400cz0G
22765AU391.pfc
2.4L Turbo, 6MT
22765AU390
LHBP400bz0G
Ascent
22765AU262.pfc
2.4L Turbo, CVT
22765AU260
22765AU261
LHBP400Az0G
Legacy / Outback
22765AV122.pfc
2.4L Turbo, CVT
22765AV120
22765AV121
LHBR300GA0G
Outback Wilderness
22765AV132.pfc
2.4L Turbo, CVT
22765AV130
22765AV131
LHBR300HA0G
22765AV661.pfc
2.4L Turbo, CVT
22765AV660
LHBT120cA0G
22765AV671.pfc
2.4L Turbo, 6MT
22765AV670
LHBT120bA0G
22765AV351.pfc
2.4L Turbo, CVT
22765AV350
LHBT010CA0G
2024
WRX
2025
WRX
Ascent
Continued...
Bulletin Number: 09-136-25R; Revised: 05/29/25
Page 2 of 4
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
•
Reprogram the ECM Control Module following the normal SSM5-R procedure.
•
Detailed information regarding the SSM5-R reprogramming procedures can be found in TSB 1428-21R.
Subaru of America, Inc. (SOA) highly recommends utilizing either the Subaru Midtronics DCA8000 Dynamic Diagnostic Charging System or the Subaru Midtronics GR8-1100 Diagnostic Battery
Charger to the vehicle and utilizing the Power Supply Mode feature anytime a vehicle control module
is being reprogrammed. Once the Midtronics charger is connected to the vehicle, if the battery is fully
charged, it takes less than three (3) minutes to boot-up the charger, select the Power Supply Mode,
and have the battery voltage stabilized and ready for reprogramming.
NOTES:
•
For instructions on using the Power Supply Mode, reference the applicable User Manual for the
Midtronics DCA-8000 Dynamic Diagnostic Charging System and the Midtronics GR8-1100
Diagnostic Battery Charger on STIS
•
Confirm all electrical loads such as lights, audio, HVAC, seat heaters, and rear defroster are all
switched OFF before setting up the charger for Power Supply Mode.
•
Select the correct battery type (Enhanced Flooded, Flooded, Gel, AGM or AGM Spiral).
•
Input the CCA which matches the vehicle’s battery. NOTE: OE and replacement batteries have
different CCA ratings. Always confirm the battery’s CCA rating before proceeding.
•
If using a DCA-8000 Dynamic Diagnostic Charging System, set the power supply voltage to
13.5 Volts.
•
DO NOT connect the DST-i or DST-010 until the Power Supply mode function has completed its
battery test mode and the Charging Voltage has dropped to and shows a steady 13.5 Volts on the
display.
•
Once Power Supply Mode reaches a steady 13.5 Volts, connect the DST-i or DST-010 to the
OBD connector and proceed with initiating the normal SSM5-R reprogramming process.
•
Amperage will fluctuate based upon the vehicle’s demand for power. NOTE: If the voltage rises
beyond 14 Volts while programming is in process, the procedure will abort. This can indicate a
need to test or charge the vehicle battery before any further attempt at programming is made.
•
ALWAYS set the power supply voltage to 13.5 Volts when using Power Supply Mode. NEVER
turn the ignition switch on when charging at voltages 15 Volts or higher.
REMINDER: If the DCA-8000 or GR8-1100 indicates the vehicle’s battery must be charged, charge
the battery fully before proceeding to reprogram the vehicle while using the Power Supply Mode.
NOTE: Control module failures resulting from battery discharge during reprogramming are not a
matter for warranty. Should any DTCs reset after the reprogramming update is performed, diagnose
per the procedure outlined in the applicable Service Manual.
Continued...
Bulletin Number: 09-136-25R; Revised: 05/29/25
Page 3 of 4
WARRANTY / CLAIM INFORMATION:
For vehicles within the Federal Emissions Extended Defect Warranty period or covered by a Subaru
Added Security Classic or Gold plan, this repair may be submitted using the following claim
information:
Labor Description
Labor Operation #
Fail Code
Labor Time
MFI OBDII ECM Reprogramming
A452-186
UPG-48
.4H
IMPORTANT: Always note the original Calibration Identification number (CID) / ROMID the
vehicle came in with on the repair order before reprogramming and, make sure to list the NEW CID /
ROMID for any newly installed programming (as confirmed from the actual control module AFTER
installation). The NEW CID / ROMID MUST also be noted on the repair order as this information is
required for entry in the Miscellaneous Detail field during claim submission. These numbers can be
read using SSM5-R.
NOTE: The pfc file listings provided in this bulletin are the latest available at the time of publishing.
Updates are often released thereafter without revision to the original bulletin. For this reason, it is
critical to always have the latest version of Select Monitor software installed on your system. You
can confirm if a later version is available by entering the CID listed in this bulletin into SSM5-R. If a
newer CID is shown as available in SSM5-R, reprogram using that file.
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as previously released
information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Bulletin Number: 09-136-25R; Revised: 05/29/25
Page 4 of 4
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 09-136-25R
Replacement Service Bulletin Number:
MFR Communication Date: 2025-05-29
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Obd2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15 reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth obd2 scanner diagnostic tool ideal for diy's and private car owners
- Bidirectional Control for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping Diy users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15 Maintenance Resets: The current version introduces 15 popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis.
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Cost-effective Diagnostic Scan Tool】Lifetime updates without fee, No subscription fee required, No IP restrictions, Ediag Elite bluetooth scanner stands out. It can perform in-depth Full System diagnostics,15+ Reset Services, powerful Active Test, CANFD & FCA AutoAuth. Connect your phone via Bluetooth for diagnosis, providing a faster, smarter and smoother diagnostic experience. Easy to put in pocket, convenient to carry, keep track of the car's status anytime, anywhere. Best bang for your bucks.
- 【15+ Reset Service, Easy Problem Solving】 KINGBOLEN Ediag Elite obd2 scanner diagnostic scan tool comes with 15+ professional reset functions, including: Oil Reset, ABS Bleeding, Injector Code, SAS Reset, TPMS Reset, BMS Reset, AFS Reset, Sunroof Calibration, Brake Reset and more special functions in system diagnose menu. The ideal bluetooth scanner for mechanics and DIY enthusiasts, which can save unnecessary maintenance costs and significantly shorten repair time.
- 【Comprehensive Full Systems Diagnostic】 The Ediag Elite obd2 scanner bluetooth supports full system In-Depth diagnosis. It can read/clear fault codes, read real-time data/freeze frame, module information, and perform testing and reset functions for ECM, BCM, ABS, SRS, TPMS, TCM, BMS, SAS, A/C & RTM systems ect. It works with most car models after 1996, cover more than 150+ car brands. Supports 22 global languages for your convenience(EN, FR, ES, DE, IT, RU, PT, JP, TU...)
- 【Powerful Bidirectional Scan Tool & Active Test】 The obd2 code reader for Ediag Elite can perform real time active test that can send commands to the vehicle’s ECU to drive the actuators to work, such as turn on the radiator fan, modulate the throttle, open/close windows, etc. It can help you quickly find out the bad components and the cause of the fault, which can save you a lot of time. With BT 5.2 wireless connectivity, you can enjoy wireless diagnostics up to 33 feet.
- 【FCA AutoAuth & CANFD Compatibility】 Ediag Elite scan tool offers support with FCA Gateway Access, allowing you to perform protected functions on FCA vehicles, including Chrysler, Dodge, Jeep, Alfa Romeo, Fiat vehicles, etc.(Note:just allows you to access the FCA, but need to have your own FCA account) Supports the CAN-FD protocol, provide high-speed vehicle diagnostic communication and data transfer, working perfectly on GM vehicles produced after 2020, saving $100 to buy a CAN FD adapter.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.