NHTSA ID Number: 11018060
Manufacturer Communication Number: No. 2025
TSB/Document Date: 2025-05-07
Summary
Technical information for ASA3 – Re-Program Reversing Camera Control Unit and, if necessary, Replace Reversing Camera and Surround View Cameras
4.4
Establish readiness for operation (ignition on).
Check readiness for driving the vehicle.
5.1
Operate the footbrake and keep it pressed.
5.2
Use the selector lever to engage driving gears D and R one after the other. The selected gear
must be displayed in the gear indicator on the instrument cluster.
5.3
Activate the parking lock via button P.
6
End readiness for operation (ignition off) and restore it after waiting for approx. 30 seconds (ignition
on).
7
Read out and delete fault memory.
Information
If control units are found to have faults that are not caused by control unit programming, these must
first be found and corrected.
AfterSales
Apr 25, 2025
Page 7 of 13
9
Service
ASA3
ENU
Technical Information
2025
Information
Due to the vehicle diagnosis and coding/programming, fault memory entries that do not indicate an
actual fault in the vehicle can be stored.
These fault memory entries can be deleted for the most part after repeated starting and a test drive.
The following fault memory entry is always stored as part of a vehicle diagnosis with the PIWIS Tester
and does not represent an actual fault:
Control unit
Fault code
Description
"various" control units
B184C00
Protection of vehicle diagnostics, actuation
active
Main control unit for gateway
HCP5 (J1273)
U17A000
Diagnostic filter, access protection deactivated
Drive and chassis main
control unit HCP1 (J1312)
C140DF0
Vehicle Protected Environment (VPE), vehicle
protection activated
7.1
If necessary, restore communication of the PIWIS Tester with the vehicle.
7.2
Press •F7“ to call up the additional menu on the PIWIS Tester.
7.3
Select and confirm the menu item "Read/delete all fault memories" and press to confirm.
7.4
Press •F8“ to delete the displayed fault memory entries.
8
Create Vehicle Analysis Log again. To do this, press •F7“ to access the additional menu and select
create protocol.
Flag the created VAL with "after repair".
9
End the diagnostic application, end readiness for operation (ignition off) and disconnect the PIWIS
Tester from the vehicle.
10 Switch off and disconnect the battery charger.
11 Enter campaign in the Warranty and Maintenance logbook.
Warranty processing
Information
The specified labor times were determined specifically for carrying out this campaign and include all
necessary preliminary work and rework. The labor times can differ from the labor time published in the Labor
Operation List in the PCSS.
Scope 1:
Re-program reversing camera control unit
•
Apr 25, 2025
Page 8 of 13
Campaign WSD0 already implemented
AfterSales
Service
Technical Information
2025
ENU
ASA3
9
Labor time:
Re-program reversing camera control unit
Includes:
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 127 TU
Þ Damage number ASA3 099000 1
⇒
Scope 2:
Re-program reversing camera control unit
•
Campaign WSD0 open
Information
Programming of the reversing camera as part of the WSD0 campaign implementation (expansion to software
network VR28.11).
Labor time:
Re-program reversing camera control unit
Includes:
Re-program reversing camera control unit as part of campaign
WSD0
Labor time: 25 TU
Þ Damage number ASA3 099000 1
⇒
Scope 3:
Re-program reversing camera control unit and replace reversing camera
Labor time:
Re-program reversing camera control unit and replace reversing camera
Includes:
Replace reversing camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 230 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
AfterSales
Apr 25, 2025
Page 9 of 13
9
Service
ASA3
Scope 4:
ENU
Technical Information
2025
Re-program reversing camera control unit and replace reversing camera and front camera
Labor time:
Re-program reversing camera control unit and replace reversing camera and
front camera
Includes:
Replace reversing camera
Replace front camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 556 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 5:
Re-program reversing camera control unit and replace reversing camera and camera on left side
Labor time:
Re-program reversing camera control unit and replace reversing camera and
camera on left side
Includes:
Replace reversing camera
Replace left surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Apr 25, 2025
Page 10 of 13
AfterSales
Labor time: 271 TU
Service
Technical Information
Scope 6:
2025
ENU
ASA3
9
Re-program reversing camera control unit and replace reversing camera and camera on right side
Labor time:
Re-program reversing camera control unit and replace reversing camera and
camera on right side
Includes:
Replace reversing camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 271 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
1 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 7:
Re-program reversing camera control unit and replace reversing camera, front camera and camera on left
side
Labor time:
Re-program reversing camera control unit and replace reversing camera,
front camera and camera on left side
Includes:
Replace reversing camera
Replace front camera
Replace left surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 597 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
2 piece(s)
Þ Damage number ASA3 099000 2
⇒
AfterSales
Apr 25, 2025
Page 11 of 13
9
Service
ASA3
Scope 8:
ENU
Technical Information
2025
Re-program reversing camera control unit and replacing reversing camera, front camera and camera on
right side
Labor time:
Re-program reversing camera control unit and replacing reversing camera,
front camera and camera on right side
Includes:
Replace reversing camera
Replace front camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 597 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
2 piece(s)
Þ Damage number ASA3 099000 2
⇒
Scope 9:
Re-program reversing camera control unit and replace reversing camera and camera on left and right side
Labor time:
Re-program reversing camera control unit and replace reversing camera,
front camera and camera on left and right side
Includes:
Replace reversing camera
Replace left surround view camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
2 piece(s)
⇒ Damage number ASA3 099000 2
Apr 25, 2025
Page 12 of 13
AfterSales
Labor time: 312 TU
Service
Technical Information
Scope 10:
2025
ENU
ASA3
9
Re-program reversing camera control unit and replace reversing camera, front camera and camera on left
and right side
Labor time:
Replace reversing camera, front surround view camera, replace left and right
surround view camera and re-program reversing camera control unit
Includes:
Replace reversing camera
Replace front camera
Replace left surround view camera
Replace right surround view camera
Re-program reversing camera control unit
Connecting and disconnecting battery charger
Connect and disconnect PIWIS Tester
Read out and delete fault memories
Labor time: 639 TU
Required parts:
Part No.
Designation
Quantity
PAD980568C
Control unit with camera for reversing camera
system
1 piece(s)
PAD980551
Camera exterior mirror housing bumper
3 piece(s)
Þ Damage number ASA3 099000 2
⇒
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are
written to inform those technicians of conditions that may occur on some Porsche
vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in
order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and
may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins
are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester
are the ones that must be followed.
© 2025 Porsche Cars North America, Inc.
AfterSales
Apr 25, 2025
Page 13 of 13
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: No. 2025
Replacement Service Bulletin Number:
MFR Communication Date: 2025-04-26
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.