NHTSA ID Number: 11017317
Manufacturer Communication Number: 25-NA-080
TSB/Document Date: 2025-04-29
Summary
This service bulletin provides a procedure to overhaul the control valve to replace a plate and worn down check ball to correct the customers concern of No Reverse, No Shift Past Third Gear - DTC P2732 Set.
Bulletin No.: 25-NA-080
Service Bulletin
Date: March, 2025
TECHNICAL
Subject:
No Reverse, No Shift Past Third Gear - DTC P2732 Set
Important: : This service bulletin only applies to vehicles listed that had service valve body part number 24047993
or 24065351 or a service transmission installed in the 2024 Calendar Year and returned 15000 miles (24000 km) or
less with the condition of No Reverse, No Shift Past Third Gear and DTC P2732. Note the MQB RPO Spacer Plate
is engine specific between the gas and diesel applications.
Brand:
Model:
Model Year:
from
to
from
Camaro
2021
2024
Silverado 1500
2021
2021
2022
2022
Silverado 1500 LTD
(RPO J21, VIN Digit
5 = W/Y)
Silverado 1500 New
(RPO J22, VIN Digit
5 = A)/D
Build Date:
Silverado 1500
2023
2023
Sierra 1500
2021
2021
2022
2022
2023
2023
Sierra 1500 Limited
(RPO J21, VIN Digit
5 = 8/9)
Sierra 1500 New
(RPO J22, VIN Digit
5 = H/U)
Sierra 1500
Involved Region or Country
—
LGX, LT4,
LT1, L84,
L87, LM2,
LZ0
MI1, MI4, MHT,
MI2, MQB
to
—
United States, Canada, Europe, Middle East, Argentina, Brazil, Bolivia, Chile, Colombia,
Ecuador, Paraguay, Peru, Uruguay, South Korea, Philippines, Australia/New Zealand
Some customers may comment on one or more of the following conditions:
• No reverse
Condition
• No shifting past third gear
Technicians may find P2732 (Transmission Control Solenoid Valve 6 Stuck Off) set in the
Transmission Control Module (TCM).
Cause
This condition may be caused by a mis-stamped spacer plate and worn check ball
internal of the control valve.
Correction
Replace the spacer plate and check balls in the control valve.
Important: Service agents must comply with all International, Federal, State, Provincial, and/or Local laws
applicable to the activities it performs under this bulletin, including but not limited to handling, deploying,
preparing, classifying, packaging, marking, labeling, and shipping dangerous goods. In the event of a
conflict between the procedures set forth in this bulletin and the laws that apply to your dealership, you
must follow those applicable laws.
Service Procedure
Note: A 10EPL Internal Torx Plus Socket is required for disassembly.
Copyright 2025 General Motors. All Rights Reserved.
Page 2
March, 2025
Bulletin No.: 25-NA-080
1. Remove the control valve Control Valve Body Replacement.
6804421
2. Remove the bolts that secure the auxiliary body to the solenoid cover.
3. Remove the bolt that secures the wiring harness to the control valve body.
Bulletin No.: 25-NA-080
March, 2025
Page 3
6804426
4. Position the wiring harness aside.
5. Remove the remainder of the bolts that secure the solenoid cover.
Page 4
March, 2025
Bulletin No.: 25-NA-080
6804446
6. Separate the Auxiliary and Auxiliary plate.
Bulletin No.: 25-NA-080
March, 2025
Page 5
6804481
Note: Lower the valve body keeping the worm trail face pointing up. There are 5 check balls in the control valve
body that are loose and can fall out.
7. Separate the control valve body and thick plate from the solenoid body.
Page 6
March, 2025
Bulletin No.: 25-NA-080
6804487
Note: Use care not to damage or bend the solenoids.
8. Stand valve body on its side with the solenoids on the base.
9. Using care, begin separating the valve body from the solenoid body.
⇒
Lower the valve body keeping the worm trail face pointing up. There are 5 check balls in the valve body that
are loose and can fall out.
Bulletin No.: 25-NA-080
March, 2025
Page 7
6804509
10. Once body is partially split, twist thermocouple and pull to remove from the valve body assembly.
Page 8
March, 2025
Bulletin No.: 25-NA-080
6804511
11. Split the assembly in half.
12. Verify that the 5 check balls remain in the control valve body.
Bulletin No.: 25-NA-080
March, 2025
Page 9
6804467
13. Ensure solenoid body is lying flat on table with spacer plate up.
− There are check balls/check valves that can fall out once removed.
14. Remove the 2 bolts holding the spacer plate to solenoid body.
15. Once spacer plate is removed, discard Spacer Plate.
Page 10
March, 2025
Bulletin No.: 25-NA-080
6858665
Note: The parts section indicates to order 5 check balls. Replacement of the undersized check ball is all that is
required. The extras were suggested in the event some are misplaced or damaged in the disassembly process.
16. Utilizing a pick or equivalent, remove the undersized check ball from the seat and discard.
− If needed, press the check ball out from the solenoid body cover side using caution when doing this to
prevent parts from falling out of the solenoid body.
17. Install the new check ball into the solenoid housing.
Bulletin No.: 25-NA-080
March, 2025
Page 11
6804538
18. Ensure all check balls are in place in solenoid body.
Page 12
March, 2025
Bulletin No.: 25-NA-080
6858662
19. Ensure the spring check valves and the VFS damper are in place in solenoid body prior to putting on
replacement spacer plate.
Bulletin No.: 25-NA-080
March, 2025
Page 13
6804467
20. Place new spacer plate on solenoid body and run down spacer plate bolts.
⇒
Torque the fasteners to 9 Y (80 lb-in).
Page 14
March, 2025
Bulletin No.: 25-NA-080
6804511
21. Take solenoid body half and set on top of valve body half – make sure harness is out of the way. There are 2
locating dowels on the valve body used for alignment.
22. Stand valve body on its side with the solenoids on the base.
23. Place thermistor back into cover side and rotate until anti-rotation feature is aligned into cast slot.
24. Place thick plate and thick plate spacer plate back on top of solenoid body cover side.
− There are 3 locating dowels to align.
Bulletin No.: 25-NA-080
March, 2025
Page 15
6814198
25. Place aux body spacer plate and aux body back on top of thick plate.
− There are 2 locating dowels to align.
Page 16
March, 2025
Bulletin No.: 25-NA-080
6837102
Important: Torque the fasteners to 9 Y (80 lb-in).Torque the aluminum fastener (1) to 3 Y (27 lb-in) plus 30°
(angle).
26. Reinstall all bolts following the bolt sequence and torque diagrams.
Reinstall aux pump O ring seal and cover.
Install the control valve assembly. Refer to Control Valve Body Replacement.
Note: Characterization and Service Fast Learn (SFL) are not required for this repair.
Parts Information
Note: Follow the procedure in SI for additional parts that may be required for the repair.
Causal Part
Description
Part Number
Qty
X
PLATE ASM-C/VLV BODY SPCR (W/
GSKT) L84, L87, LGX, LT1, LT4
24299519
1
X
PLATE ASM-C/VLV BODY SPCR (W/
GSKT) LM2, LZ0
24299518
1
N/A
SEAL-A/TRNS AUX FLUID PUMP OTLT
PIPE
24271818
1
N/A
BOLT/SCREW-C/VLV BODY
24050764
1
N/A
SEAL-A/TRNS FLUID PUMP
24290889
1
N/A
SEAL-A/TRNS FLUID PUMP
24270191
1
N/A
SEAL-EXH MANIF PIPE (L) - L84
15035747
1
N/A
SEAL - EXH MANIF R - L84
15077362
1
N/A
SEAL-A/TRNS AUX FLUID PUMP
24047734
1
Bulletin No.: 25-NA-080
March, 2025
Page 17
Causal Part
Description
Part Number
Qty
N/A
VALVE-C/VLV BODY BALL CHK
96020431
5
N/A
Fluid A/Trans (ULV) USA
19352619 (U.S.) 19352620
(Canada)
As Required
Warranty Information
For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable
Warranties section of Investigate Vehicle History (IVH) for coverage information.
Labor Operation
8486508*
Description
Labor Time
Spacer Plate and Check Ball Replacement for All Camaro
1.8 hrs
Spacer Plate and Check Ball Replacement for 2021 - 2023
LM2, LZ0
2.1 hrs
Spacer Plate and Check Ball Replacement for 2021 L84, L87
3.9 hrs
Spacer Plate and Check Ball Replacement for 2022 L84, L87
(J21)
3.9 hrs
Spacer Plate and Check Ball Replacement for 2022 L84, L87
(J22)
3.5 hrs
Spacer Plate and Check Ball Replacement for L84, L87
3.5 hrs
With ULV
0.3 hr
Add
*This is a unique Labor Operation for bulletin use only.
Version
1
Modified
Released March 27, 2025
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job
properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 25-NA-080
Replacement Service Bulletin Number:
MFR Communication Date: 2025-03-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.