NHTSA ID Number: 11014568
Manufacturer Communication Number: 25-NA-014
TSB/Document Date: 2025-02-27
Summary
This bulletin provides a procedure to overhaul the control valve to replace a plate and worn down check ball to correct the customers concern of No Reverse, No Shift Past Third Gear - DTC P2732 Set.
Bulletin No.: 25-NA-014
Service Bulletin
Date: February, 2025
TECHNICAL
Subject:
Brand:
No Reverse, No Shift Past Third Gear - DTC P2732 Set
Model:
Silverado 1500
Sierra 1500
Involved Region or Country
Model Year:
from
to
2024
2024
Build Date:
from
Engine:
L84
MHT, MI2
to
North America
Some customers may comment on one or more of the following conditions:
• No reverse
Condition
• No shifting past third gear
Some technicians may find P2732 (Transmission Control Solenoid Valve 6 Stuck Off)
set in the Transmission Control Module (TCM).
Cause
This condition may be caused by a mis-stamped spacer plate and worn check ball
internal of the control valve.
Correction
Replace the spacer plate and check balls in the control valve.
Important: Service agents must comply with all International
, Federal, State, Provincial, and/or Local laws
applicable to the activities it performs under this bulletin, including but not limited to handling, deploying,
preparing, classifying, packaging, marking, labeling, and shipping dangerous goods. In the event of a
conflict between the procedures set forth in this bulletin and the laws that apply to your dealership, you
must follow those applicable laws.
Service Procedure
1. Remove the control valve Control Valve Body Replacement.
Copyright 2025 General Motors. All Rights Reserved.
Page 2
February, 2025
Bulletin No.: 25-NA-014
6804421
2. Remove the bolts that secure the auxiliary body to the solenoid cover.
3. Remove the bolt that secures the wiring harness to the control valve body.
Bulletin No.: 25-NA-014
February, 2025
Page 3
6804426
4. Position the wiring harness aside.
5. Remove the remainder of the bolts that secure the solenoid cover.
Page 4
February, 2025
Bulletin No.: 25-NA-014
6804446
6. Separate the Auxiliary and Auxiliary plate.
Bulletin No.: 25-NA-014
February, 2025
Page 5
6804481
Note: Lower the valve body keeping the worm trail face pointing up. There are 5 check balls in the control valve
body that are loose and can fall out.
7. Separate the control valve body and thick plate from the solenoid body.
Page 6
February, 2025
Bulletin No.: 25-NA-014
6804487
Note: Use care not to damage or bend the solenoids.
8. Stand valve body on its side with the solenoids on the base.
9. Using care, begin separating the valve body from the solenoid body.
⇒
Lower the valve body keeping the worm trail face pointing up. There are 5 check balls in the valve body that
are loose and can fall out.
Bulletin No.: 25-NA-014
February, 2025
Page 7
6804509
10. Once body is partially split, twist thermocouple and pull to remove from the valve body assembly.
Page 8
February, 2025
Bulletin No.: 25-NA-014
6804511
11. Split the assembly in half.
12. Verify that the 5 check balls remain in the control valve body.
Bulletin No.: 25-NA-014
February, 2025
Page 9
6804467
13. Ensure solenoid body is lying flat on table with spacer plate up.
− There are check balls/check valves that can fall out once removed.
14. Remove the 2 bolts holding the spacer plate to solenoid body.
15. Once spacer plate is removed, discard Spacer Plate.
Page 10
February, 2025
Bulletin No.: 25-NA-014
6804538
Note: The parts section indicates to order 5 check balls. Replacement of the undersized check ball is all that is
required. The extras were suggested in the event some are misplaced or damaged in the disassembly process. .
16. Utilizing a pick or equivalent, remove the undersized check ball from the seat and discard.
− If needed, press the check ball out from the solenoid body cover side using caution when doing this to
prevent parts from falling out of the solenoid body.
17. Install the new check ball into the solenoid housing.
Bulletin No.: 25-NA-014
February, 2025
Page 11
6804538
18. Ensure all check balls, spring check valves, and VFS damper are in place in solenoid body prior to putting on
replacement spacer plate.
Page 12
February, 2025
Bulletin No.: 25-NA-014
6804467
19. Place new spacer plate on solenoid body and run down spacer plate bolts.
⇒
Torque the fasteners to 9 Y (80 lb-in).
Bulletin No.: 25-NA-014
February, 2025
Page 13
6804511
20. Take solenoid body half and set on top of valve body half – make sure harness is out of the way. There are 2
locating dowels on the valve body used for alignment.
21. Stand valve body on its side with the solenoids on the base.
22. Place thermistor back into cover side and rotate until anti-rotation feature is aligned into cast slot.
23. Place thick plate and thick plate spacer plate back on top of solenoid body cover side.
− There are 3 locating dowels to align.
Page 14
February, 2025
Bulletin No.: 25-NA-014
6814198
24. Place aux body spacer plate and aux body back on top of thick plate.
− There are 2 locating dowels to align.
Bulletin No.: 25-NA-014
February, 2025
Page 15
6837102
Important: Torque the fasteners to 9 Y (80 lb-in).Torque the aluminum fastener (1) to 3 Y (27 lb-in) plus 30°
(angle).
25. Reinstall all bolts following the bolt sequence and torque diagrams.
Reinstall aux pump O ring seal and cover.
Install the control valve assembly. Refer to Control Valve Body Replacement.
Parts Information
Note: Follow the procedure in SI for additional parts that may be required for the repair.
Causal
Part
Description
Part
Number
Qty
X
PLATE ASMC/VLV BODY
SPCR (W/ GSKT)
24299519
1
N/A
SEAL-A/TRNS
AUX FLUID
PUMP OTLT
PIPE
24271818
1
N/A
BOLT/SCREWC/VLV BODY
24050764
1
N/A
SEAL-A/TRNS
FLUID PUMP
24290889
1
N/A
SEAL-A/TRNS
FLUID PUMP
24270191
1
Page 16
February, 2025
Bulletin No.: 25-NA-014
Causal
Part
Description
Part
Number
Qty
N/A
SEAL-EXH
MANIF PIPE (L)
15035747
1
N/A
SEAL - EXH
MANIF R
15077362
1
N/A
SEAL-A/TRNS
AUX FLUID
PUMP
24047734
1
N/A
VALVE-C/VLV
BODY BALL CHK
96020431
5
N/A
Fluid A/Trans
(ULV) USA
19352619
(U.S.)
19352620
(Canada)
As Required
Warranty Information
For vehicles repaired under the Powertrain coverage, use the following labor operation. Reference the Applicable
Warranties section of Investigate Vehicle History (IVH) for coverage information.
Labor Operation
Description
Labor Time
8486498*
Spacer Plate and Check Ball Replacement for L84
3.5
*This is a unique Labor Operation for Bulletin use only.
Version
1
Modified
Released February 12, 2025
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job
properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 25-NA-014
Replacement Service Bulletin Number:
MFR Communication Date: 2025-02-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.