Loading...

NHTSA ID Number: 11013293

Manufacturer Communication Number: D24R7-Bulletin

TSB/Document Date: 2025-01-31


Summary

Emission Recall for DD8 EGR Monitor Software Reprogramming


Daimler Truck :
North America LLC Recall Campaign

D24R7
Creation Date: 1130/2025

Subject: Emission Recall DD8 EGR Monitor Software Reprogramming

Models Affected
Model Model Prod. Prod.
Beke Roce Yr. Start | Yr. End | Start Date | End Date
Detroit Diesel January 1, | September
Corporation 936.913 2022 | 2024 | "5022 || 476, 2024
Identifying Feature DD8 Single Stage Turbo

General Information

On behalf of the DETROIT™ Powertrain Division listed below, Daimler Truck North America LLC (DTNA) has decided that
a defect that relates to emission exists and is initiating an Emission Recall Campaign to modify affected vehicles.
= Detroit Diesel Corporati
= Freightliner Trucks Division
= Wholly owned subsidiary/subsidiaries Freightliner Custom Chassis Corporation, Sterling Truck Corporation, Thomas
Built Buses, Western StareBay logo Truck Sales, Inc.

PROBLEM: An EGR fault monitor may not run as frequently as expected in certain situations. This may result in
the Malfunction Indicator Lamp (MIL) failing to illuminate when a failure has occurred.
SOLUTION: Reprogramming the Motor Control Module (MCM) will correct this issue.

There are approximately 8,191 vehicles involved.

Additional Repairs

Dealers must complete all outstanding recall and field service campaigns prior to the sale or delivery of a vehicle. A
Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery
of a vehicle.

Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable
time after receiving notification.

Please contact Warranty Campaigns for consideration of additional charges prior to performing the repair.

Work Instructions

Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a red completion
sticker (Form WAR260).

Replacement Parts

If our records show your dealership has ordered any vehicle(s) involved in campaign number D24R7, a list of the
customers and vehicle identification numbers will be available on DTNA Portal. Please refer to this list when ordering
parts for this recall.

No parts are required for this repair.
Page 1

Daimler Truck
North America LLC

D24R7
Creation Date: 1130/2025

Recall Campaign

IMPORTANT - After Repair is Complete:
Attach a red completion sticker (WAR260) to the base label (WAR259).

If the vehicle does not have a base label, clean a spot on the appropriate location, and attach a base label, prior to
attaching the completion sticker.

If a campaign kit is not required, write the campaign number on a blank sticker and attach it to the base label.
(Failure to install a completion sticker may result in a chargeback of the campaign claim.)

Claim Reimbursement - Labor Allowance

IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has
not been previously completed. Also, check for a completion sticker prior to beginning work.

You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting your claim
through the Warranty system within 30 days of completing this campaign.

e In OWL, use the ‘Retrieve’ function and select the appropriate procedure. This will auto-populate the PFP
component code, replacement parts, cause, corrective action and SRT code in OWL.

Table 1 - Claim Reimbursement Table

Claim Type Recall Campaign
Campaign D24R7
VMRS
Component | 044-003-286
Code
Cause Code | A1-—Campaign
Primary
Failed Part | OPC Reprogramt
Time
Procedure Allowed SRT Codes Corrective Action
(hours)
INSPECTION ONLY (D24R7) 01 996-R245A 06-Inspect
REPROGRAM ONE MODULE (D24R7) 03 996-R245B 412-Repair Recall/Campaign
REPROGRAM TWO MODULES (D24R7) 04 996-R245C 412-Repair Recall/Campaign
REPROGRAM THREE MODULES (D24R7) | 0.6 996-R245D 12-Repair Recall/Campaign

Page 2

Daimler Truck :
North America LLC Recall Campaign

D24R7
Creation Date: 1130/2025

Claim type is Recall Campaign.

e Inthe ‘Campaign’ field, enter the campaign number and appropriate condition code (D24R7).
e Inthe ‘Primary Failed Part’ field, enter “DDC Reprogram1’.

e Inthe ‘Labor’ section, enter the appropriate SRT from the ‘Labor Allowance’ table. Administrative time will be
included automatically using SRT 939-6010A, for 0.4 hours (for RVs) 0.3 hours (for all other vehicles).

e The VMRS Component Code is 044-003-286 and the Cause Code is A1 - Campaign.

« U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the
following:

« Accept the documentation of the previous repair.

« Make a brief check of the customer's paperwork to see if the repair may be eligible for reimbursement. (See
the ‘Copy of Owner Letter’ section of this bulletin for reimbursement guidelines.)

« Submit an OWL Recall Pre-Approval Request for a decision.

« Include the approved amount on your OWL claim in the ‘Other Charges’ section.
e Attach the documentation to the pre-approval request.

¢ If approved, submit a ‘based on claim’ for the pre-approval.

« The Dealer is required to reimburse the customer the appropriate amount.

IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has
not been previously completed. Also, check for a completion sticker prior to beginning work.

U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at DTNAPortal.com/WSC, if
you have any questions or need additional information. Export distributors, submit a Web inquiry or contact your
International Service Manager.

The letter notifying U.S. and Canadian vehicle owners is included for your reference.

Page 3

Daimler Truck :
North America LLC Recall Campaign

D24R7
Creation Date: 1130/2025

Copy of Notice to USA Owners

Subject: Emission Recall D244R7 DETROIT™ DD8 EGR Monitor Software
Reprogramming

Your vehicle may be equipped with software that violates (California or California and Federal) standards and
regulations.

The U.S. Environmental Protection Agency has determined that your engine/equipment may be emitting pollutants in
excess of federal emission standards (and/or California standards) as defined in Title 40 of the Code of Federal
Regulations. These emission standards protect the public health and welfare from air pollution. To ensure your full
protection, by federal law, under the emission warranty on your engine/equipment, and your right to participate in future
recalls, we recommend you have your engine/equipment serviced as soon as possible. Failure to do so can be
considered improper maintenance.

Daimler Trucks North America LLC, on behalf of its DETROIT™ Powertrain Division, is initiating Emission Recall D24R7
to modify engine model 936.913 powered vehicles manufactured in 2024. The recall will be performed at the expense of
the manufacturer.

Note that trucks already reprogrammed will be excluded from this recall. Records indicate that your vehicle has one of the
affected engines.

If you reside in the State of California, a Proof of Correction form will be provided to you by the service facility upon
completion of the repair. Please retain it as it may be requested by the DMV in order to register your vehicle.

Please understand that the California DMV (Department of Motor Vehicles) will reject vehicle registration renewals if this
emission related recall has not been completed.

Certain 2022-2024 Detroit DD8 (936.913) equipped vehicles fail to conform to California Air Resource Board (CARB)
emission standards and regulations. See below for additional detail on vehicle applicability:

Models Affected
Model Model Prod. Prod.
ES Mose Yr. Start | Yr. End | Start Date | End Date
Detroit Diesel January 1, | September
Corporation 936.913 2022 | 2024 | "2024 || 17,2024
Identifying Feature DD8 Single Stage Turbo

On the affected vehicles, OBD operational data is reset every ignition cycle due to a bug in the software. This may result
in the lack of Malfunction Indicator Lamp (MIL) illumination when a failure has occurred.

Note that trucks already reprogrammed will be excluded from this recall. Records indicate that your vehicle has one of the
affected engines. Instructions for this emission recall have been sent to your local DTNA authorized repair facility.

A Daimler Truck North America authorized service facility will reprogram the MCM. The recall will take approximately 0.6
hours and will be performed free of charge.

Page 4

Daimler Truck
North America LLC

D24R7
Creation Date: 1130/2025

Recall Campaign

Please contact a DTNA authorized repair facility to arrange to have the emission recall performed. To locate an
authorized facility, search online at https://demanddetroit.com/find-a-dealer/

You must make an appointment with the repair facility at least one week in advance of the actual repair so the
repair facility may order and receive any required parts and a new certified emission label needed to complete
this emission recall campaign. Failure to provide advance notification to the repair facility may result in repair
delays.

You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable
time after receiving notification.

If you do not own the vehicle that corresponds to the identification number(s), which appears on the Recall Notification,
please return the notification to the Warranty Campaigns Department with any information you can furnish that will
assist us in locating the present owner.

We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.

WARRANTY CAMPAIGNS DEPARTMENT
Enclosure

Page 5

Daimler Truck
North America LLC

D24R7
Creation Date: 1130/2025

Recall Campaign

Reimbursement to Customers for Repairs Performed Prior to Recall

If you have already paid to have this recall condition corrected, you may be eligible to receive reimbursement.

Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would
have cost if completed by an authorized Daimler Truck North America LLC dealer. The following documentation must be
presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:

+ The name and address of the person who paid for the repair.

* The Vehicle Identification Number (VIN) of the vehicle that was repaired.

+ What problem occurred, what repair was done, when the repair was done.

+ Who repaired the vehicle.

* The total cost of the repair expense that is being claimed.

+ Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).

Reimbursement will be made by check from your Daimler Truck North America LLC dealer.

Please speak with your Daimler Truck North America LLC authorized dealer concerning this matter.

Page 6

Daimler Truck :
North America LLC Recall Campaign

D24R7
Creation Date: 1130/2025

Copy of Notice to Canada Owners

Subject: Emission Recall D244R7 DETROIT™ DD8® EGR Monitor Software
Reprogramming

This notice was sent to you in accordance with the requirements of Canadian Environmental Protection Act (CEPA), 1999.
Engines registered in Canada will require reprogramming to a minimum software and fuel map version.

Your vehicle or engine may be releasing air pollutants, which exceed California and Federal standards. This repair does
not adversely affect the performance, fuel economy, nor durability of the vehicle or engine. These engines cannot be
operated in the State of California if the recall is not completed once made available.

The software and fuel maps were released for service beginning in September 2024. Canadian Environmental Protection
Act (CEPA), 1999, California Air Resources Board (CARB) and the Environment Protection Agency (EPA) regulations
require that software and fuel maps meet certain criteria. Reprogramming the MCM corrects the fuel maps to a certified
version.

Daimler Truck North America LLC (DTNA), on behalf of its DETROIT™ Powertrain division, is initiating emission recall
D23R4 to modify specific DD16® engines manufactured between January 2022 and September 2024. The recall will be
completed at the expense of the manufacturer.

Certain DETROIT™ DD8® engines will require reprogramming to a minimum software and fuel map version.

Note that trucks already reprogrammed are excluded from this recall. Records indicate that your vehicle has one of these
qualifying engines, which will require reprogramming the latest software and fuel maps. The procedure will be completed
at no cost to you when performed by a DTNA authorized repair facility and will be at the expense of Daimler Truck North
America LLC (DTNA) DETROIT™ Powertrain division. The scheduled time for the software update is approximately 0.6
hours.

Please contact a DTNA authorized repair facility to arrange to have the emission recall campaign performed. To locate an
authorized facility, search online at https://demanddetroit.com/find-a-dealer/

In order to ensure you full protection under the emission warranty provisions, it is recommended that you have your
engine serviced as soon as possible. Failure to do so could be determined as a lack of proper maintenance of your
engine.

You may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time
after receiving notification.

If you do not own the vehicle that corresponds to the identification number(s), which appears on the Recall Notification,
please return the notification to the Warranty Department, Attention Campaign Coordinator, with any information you can
furnish that will assist us in locating the present owner.

If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would

12

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, Supports J2534/D-PDU/CAN-FD/DoIP
318 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, Supports J2534/D-PDU/CAN-FD/DoIP
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
Bestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [1.87 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: D24R7-Bulletin

Replacement Service Bulletin Number:

MFR Communication Date: 2025-01-31

MFR Internal Campaign ID/Software Version: D24R7

Communication Type: Emissions

NHTSA Components: ENGINE

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
XTOOL D7S Bidirectional Diagnostic Scan Tool, ECU Coding PMI OBD2 Scanner
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSOMM IF745 Full System OBD2 Scanner Code Reader
  • 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
  • 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
  • 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
  • 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
  • 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.

This product presentation was made with AAWP plugin.

Share to...