Loading...

NHTSA ID Number: 11012655

Manufacturer Communication Number: JLRTB02119NAS3

TSB/Document Date: 2025-01-08


Summary

Rear Headliner Vent Poor Performance


JLRTB02119NAS3

TECHNICAL BULLETIN
01 JAN 2001

© JaguareBay logo Land RovereBay logo North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly
and safely. It informs these Technicians of conditions that may occur on some vehicles,
or provides information that could assist in proper vehicle service. The procedures
should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume
that a condition described affects your vehicle. Contact an authorized Land RovereBay logo
service facility to determine whether this bulletin applies to a specific vehicle.
INFORMATION

This bulletin supersedes TSB JLRTB02119NAS2/2024 dated 08 AUG 2024, which
should either be destroyed or clearly marked to show it is no longer valid (e.g. with a line
across the page). Only refer to the electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in blue

SECTION:

412-02

SUBJECT
/CONCERN:

Rear Headliner Vent Poor Performance

AFFECTED VEHICLE RANGE:

MODEL:

MODEL
YEAR:

VIN:

ASSEMBLY
PLANT:

APPLICABILITY:

MODEL:

MODEL
YEAR:

VIN:

ASSEMBLY
PLANT:

APPLICABILITY:

Range Rover
(LK)

2022-2024

000124204519

Solihull

Vehicles With: 5
Seats

Range Rover
(LK)

2022-2024

000002254756

Solihull

Vehicles With: 7
Seats

MARKETS:

NORTH AMERICA

CONDITION
SUMMARY:

SITUATION:
The air passing through the rear right headliner air vent is approximately 12 °C (53
degrees Fahrenheit) higher than the air passing through the rear left headliner air vent.
This bulletin has been updated due to changes to the affected Vehicle
Identification Number (VIN) range.
CAUSE:
Excessive increase in air temperature within the air ducts, caused by the current air duct
routing and insufficient insulation.
ACTION:
Follow the instructions below.
Check the VIN in the warranty portal, if the bulletin JLRTB02119 has previously been
completed DO NOT continue. Repair the vehicle as necessary with reference to TOPIx.
Check the part numbers of the air ducts installed to the vehicle (refer to the parts
section of this bulletin) before ordering new parts. If the new level of parts are already
installed, check that the ducts have been correctly assembled, that there is no obvious
leakage from the joints and that there are no blockages within the ducting.

PARTS:

PART NUMBER

DESCRIPTION

QUANTITY

Vehicles with 5 seats only
LR185930

Air duct

1

LR185931

Air duct

1

LR185932

Air duct

1

LR185933

Air duct

1

LR185934

Air duct

1

LR185935

Air duct

1

LR185936

Air duct

1

568123459

Air duct

1

568123460

Air duct

1

568123461

Air duct

1

568123462

Air duct

1

568123463

Air duct

1

568123464

Air duct

1

568123465

Air duct

1

568123466

Air duct

1

Vehicles with 7 seats only

WARRANTY:

NOTE:
*When submitting your Warranty claim within the Warranty portal, use the
Condition Code list shown to select the Condition Code which best describes the
vehicle defect.

NOTES:
Repair procedures are under constant review, and therefore times are subject
to change; those quoted here must be taken as guidance only. Use TOPIx to
obtain the latest repair time.
The JLR claims submission system requires the use of causal part numbers.
Labor only claims must show the causal part number with a quantity of zero.

SRO

TIME
(HOURS)

CONDITION
CODE

CAUSAL
PART

JLRTB - Without third row seating - Rear air
ducts - Renew

99.01.95

3.0

*

LR153633

JLRTB - With third row seating - Rear air
ducts - Renew

99.01.94

3.3

*

LR153633

DESCRIPTION

NOTE:
Normal Warranty procedures apply.

SERVICE INFORMATION

NOTES:
Some variation in the illustrations may occur, but the essential information is
always correct.
Some components shown removed for clarity.

1.

The illustration shows the 6 right air ducts which require removal.
1. Right air duct 1.
2. Right air duct 2.
3. Right air duct 3.
4. Right air duct 4.
5. Right air duct 5.
6. Right air duct 6.

2.

The illustration shows the 3 left air ducts which require removal.
1. Left air duct 1.
2. NOTE:
Left air duct 2 will be removed during completion of the 'Headliner
Lower For Access' procedure.

Left air duct 2.
3. Left air duct 3.

LEFT AND RIGHT AIR DUCT REMOVAL

NOTES:
Some variation in the illustrations may occur, but the essential information is
always correct.
Some components shown removed for clarity.

All vehicles
1.

NOTE:
Left air duct 2 will be removed during completion of the 'Headliner
Lower For Access' procedure.

Lower the headliner for access only, (see TOPIx Workshop Manual section 50105: Interior Trim And Ornamentation - Removal and Installation - Headliner
Lower For Access).
Vehicles with 5 seats only

2.

Remove the loadspace floor trim.
Release the latch.
Remove the loadspace floor trim.

3.

Remove the right loadspace trim panel, (see TOPIx Workshop Manual section
501-05: Interior Trim And Ornamentation - Removal and Installation - Right
Loadspace Trim Panel - Vehicles With: 5 Seats/executive Seats).

Vehicles with 7 seats only
4.

Use the loop to release and open the smart loadspace compartment floor.

5.

Remove the smart loadspace compartment floor in the illustrated sequence.

6.

Remove the right loadspace trim panel, (see TOPIx Workshop Manual section
501-05: Interior Trim And Ornamentation - Removal and Installation - Right
Loadspace Trim Panel - Vehicles With: 7 Seats).

All vehicles

7.

NOTE:
Left side is shown, right side is similar.

Remove the right loadspace speaker.
Remove the 3 screws.
Release the loadspace speaker.
Disconnect the electrical connector.

8.

Remove the right upper loadspace side bracket.
Release the 8 wiring harness clips.
Remove the 2 bolts.
Remove the 4 nuts.
Vehicles with 5 seats only

9.

Remove the left loadspace trim panel, (see TOPIx Workshop Manual section
501-05: Interior Trim And Ornamentation - Removal and Installation - Left
Loadspace Trim Panel - Vehicles With: 5 Seats/executive Seats).

Vehicles with 7 seats only
10.

Remove the left loadspace trim panel, (see TOPIx Workshop Manual section
501-05: Interior Trim And Ornamentation - Removal and Installation - Left
Loadspace Trim Panel - Vehicles With: 7 Seats).

All vehicles
11.

Remove the left loadspace speaker.
Remove the 3 screws.
Release the loadspace speaker.
Disconnect the electrical connector.

12.

Remove the left upper loadspace side bracket.
Release the 4 wiring harness clips.
Remove the 2 bolts.
Remove the 3 nuts.

13.

Remove the rear right junction box assembly.
Disconnect the 4 electrical connectors.
Remove the 2 bolts.

14.

Reposition the module housing bracket.
Remove the 2 nuts.
Remove the nut.
Vehicles with 5 seats only
15.

Remove and discard the right air duct 1.
Remove the 2 trim clipseBay logo.

12

Bestseller No. 1
3M Headliner & Fabric Adhesive, 18.1 oz.,
  • Recommended for automotive headliners in vehicles.
  • Formula dries in 30 to 60 minutes.
  • Adjustable nozzle.
  • Product dries clear.
Bestseller No. 2
Permatex 27828 Body Shop Heavy Duty Headliner and Carpet Adhesive, 16.75 oz Aerosol Can
6,239 Reviews
Permatex 27828 Body Shop Heavy Duty Headliner and Carpet Adhesive, 16.75 oz Aerosol Can
  • Extreme Holding Power - High Strength And High Temperature...
  • Easy Application- Permatex Headliner Adhesive Is Designed...
  • Resist The Elements - Permatex Headliner Adhesive Is...
  • Professional Grade- Headliner Adhesive That Has A High...
  • Suggested Applications - Headliners; Carpets; Trunk Linings...

If the PDF is very large, it may not load in the preview below.

Download PDF [2.08 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: JLRTB02119NAS3

Replacement Service Bulletin Number:

MFR Communication Date: 2025-01-08

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: UNKNOWN OR OTHER

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Diagnostic Scan Tool, ECU Coding PMI OBD2 Scanner
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
Sale
2026 BOSSOMM IF745 Full System OBD2 Scanner Code Reader
  • 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
  • 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
  • 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
  • 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
  • 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.

This product presentation was made with AAWP plugin.

Share to...