NHTSA ID Number: 11010339
Manufacturer Communication Number: T-SB-0093-24
TSB/Document Date: 2024-11-08
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: •Careful inspection for paint chips/scratches and body dents/dings. •Proper operation of electrical accessories (including interior light, clock, and radio reset). •Interior cleanliness. •Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. (See PDS Check Sheet item 8 of “Final Inspection and Cleaning.”) This bulletin contains the PDS procedures that apply specifically to 2025 model year 86 vehicles. Refer to T-SB-0028-24, the universal Check Sheet that contains PDS steps that apply to all 2025 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0023-24, Long-Term Vehicle Storage Guidelines.
A
1
A
Hole A
1
Well Nuts
2
Intake Cover
© 2024 Toyota
Motor Sales, USA
A
2
1
T-SB-0093-24
October 11, 2024
Page 8 of 14
2025 86 Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation (continued)
Installation Procedure (continued)
3. Align holes “A” in the front license plate mounting bracket with the well nuts, and then install
the front license plate mounting bracket with the two bolts “1”.
Torque: 1.1 N*m (11 kgf*cm, 10 in*lbf)
NOTICE
Do NOT overtighten the bolts.
4. Install the front license plate to the front license plate mounting bracket using two bolts “2”, as
shown in Figure 6.
Figure 6.
3
1
4
1
2
1
Bolt 1
3
Front License Plate Mounting Bracket
2
Bolt 2
4
Front License Plate
© 2024 Toyota Motor Sales, USA
T-SB-0093-24
October 11, 2024
Page 9 of 14
2025 86 Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation
1. Remove the front and rear emergency
towing eyelets from the front
and rear bumpers by turning
them counterclockwise.
Figure 7.
NOTE
If it is difficult to loosen the front emergency
towing eyelet, use a steel bar.
1
2
1
Front Emergency Towing Eyelet
2
Rear Emergency Towing Eyelets
© 2024 Toyota Motor Sales, USA
T-SB-0093-24
October 11, 2024
2025 86 Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)
2. Place one of the removed rear
emergency towing eyelets into the
luggage tray in the luggage compartment.
Figure 8.
A
NOTE
Dispose of the other removed emergency
towing eyelets.
1
B
1
1
Emergency Towing Eyelet
A
Type A
B
Type B
© 2024 Toyota Motor Sales, USA
Page 10 of 14
T-SB-0093-24
October 11, 2024
Page 11 of 14
2025 86 Pre-Delivery Service (PDS)
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation (continued)
3. Install the front and rear emergency
towing eyelet hole covers, which are
stored in the glove box, onto the front and
rear bumpers.
A. Insert the arrow-shaped part “A” of the
front emergency towing eyelet hole cover
(lower side) into the eyelet hole “B” as
shown. Seat the tabs to secure the hole
cover to the front bumper.
Figure 9.
1
D
B
B. Insert the arrow-shaped part “C” of the
front emergency towing eyelet hole cover
(upper side) into the eyelet hole “D” as
shown. Seat the tabs to secure the hole
cover to the front bumper.
C
2
A
C. Insert the arrow-shaped part “A” of the
rear emergency towing eyelet hole cover
into the eyelet hole “B” as shown. Seat
the tabs to secure hole cover to the
rear bumper.
B
NOTE
Make sure the front emergency towing
eyelet cover is installed in the front, and
the rear emergency towing eyelet cover is
installed in the rear.
A
3
1
Front Emergency Towing Eyelet Hole Cover
(Upper Side)
2
Front Emergency Towing Eyelet Hole Cover
(Lower Side)
3
Rear Emergency Towing Eyelet Hole Cover
A
Arrow-shaped Part
B
Eyelet Hole
C
Arrow-shaped Part
D
Eyelet Hole
© 2024 Toyota Motor Sales, USA
T-SB-0093-24
October 11, 2024
Page 12 of 14
2025 86 Pre-Delivery Service (PDS)
Installation of Rubber Body Plugs
1. Confirm the number of plugs in the glove box. If two plugs are present, perform
substep 2A ONLY. If four plugs are present, perform substep 2A AND substep 2B.
2. Install the plugs according to the instructions below by confirming the number of plugs in the
glove box.
A. Install two plugs in the rear side member hole or rocker inner hole as shown.
B. Install two plugs in the torque box hole or rocker inner hole as shown.
Figure 10.
1
2
z
6
3
z
5
z
z
4
z
6
z
z
1
Front Side
4
Rear Side Member Hole or Rocker Inner Hole
2
Rear Side
5
Rocker Inner
3
Torque Box Hole or Rocker Inner Hole
6
Install Plug Here (if Applicable)
NOTICE
The installation of these plugs is required to prevent rust.
These plugs are stored in the glove box.
The number of plugs may vary according to production locations in the same
vehicle model.
© 2024 Toyota Motor Sales, USA
T-SB-0093-24
October 11, 2024
Page 13 of 14
2025 86 Pre-Delivery Service (PDS)
Tire Pressure Warning System (TPWS) Initialization
Refer to the applicable Owner’s Manual for the TPWS initialization procedure.
2025 86:
Section 6-3 Maintenance and Care – Do-It-Yourself Maintenance – Tires –
Initializing the Tire Pressure Warning System
NOTE
To adjust the tire pressure correctly when the outside temperature is significantly colder than shop
temperature, perform a Health Check using GTS+ and select the compensation tire pressure
checkbox. Compensation pressures will display on the Health Check results screen. Adjust the tire
pressure when the tires are cold.
The spare tire does NOT have a TPWS sensor.
DCM Activation
The DCM (Data Communication Module) activation for 2025 model year 86 vehicles during
shipping is different than for other Toyota model vehicles. A lit green LED may NOT be used to
indicate the system’s operation upon arrival at the dealership, and this function MUST
be confirmed.
1. Press and hold the “i” button for
3 – 5 seconds.
Figure 11.
2. If the DCM has NOT previously been
activated, the following will occur.
The LED light indicators will begin
blinking red and green.
The LED light indicators will turn OFF.
The LED light indicators will turn green,
ONLY if successfully activated.
3
1
4
NOTE
If there are ANY DTCs present and/or
other conditions present, refer to the
applicable model and model year
Repair Manual.
2
1
“SOS” Button
2
LED Light Indicators
3
Microphone
4
“i” Button
© 2024 Toyota Motor Sales, USA
T-SB-0093-24
October 11, 2024
Page 14 of 14
2025 86 Pre-Delivery Service (PDS)
DCM Activation (continued)
3. If the DCM has previously been activated, a visual indicator on the head unit will display
“Roadside Assistance …Connecting” along with a voice prompt “Connecting to safety connect
roadside assistance.”
NOTE
If this occurs, press the “i” button again or the End Call icon on the head unit.
No further action is necessary.
© 2024 Toyota Motor Sales, USA
- Seamless Bluetooth Connectivity: Car stereo with Bluetooth...
- Powerful, Clear Audio Performance: Equipped with a built-in...
- High-Quality Music Playback via USB: Enjoy clear, detailed...
- Compact 1-DIN Design: Single din radio is designed with a...
- Simple Sound Customization: Dedicated Direct EQ Keys let you...
- 【High Quality Car Stereo Player】- Our double din car...
- 【Double Din Car Stereo Phone Mirror Link】- Support...
- 【7 inch Double Din Car Radio With Bluetooth 5.0 and FM...
- 【Car Stereo Double Din Inputs】- USB /SD/AUX input. car...
- 【Standard Double Din Stereo with Backup Camera】- Parking...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0093-24
Replacement Service Bulletin Number:
MFR Communication Date: 2024-10-11
MFR Internal Campaign ID/Software Version: T-SB-0093-24
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10-in-1 OBD2 Functions | Beyond Basic Code Reading 】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.