NHTSA ID Number: 11009673
Manufacturer Communication Number: TSB-131-24030
TSB/Document Date: 2024-11-04
Summary
Inspection of transmission driveshaft fitment/security if specific faults are reported. Lotus
has received reports from the dealer network of: ̵ Loss of drive. ̵ Oil leaking from the transmission driveshaft seals. ̵ Transmission noise while driving. It has been identified that a potential cause of these issues is as a result of the driveshafts not being fully locked in position into the transmission at the time of vehicle assembly. Start of production for both Emira V6 powertrain (manual and automatic) and Emira 4-cylinder DCT up to 2025 model year VIN SCCLEKAX4RHB12094 inclusive. If an Emira owner contacts you, or you are presented with a vehicle within the affected VIN range which has any of the transmission faults listed above*, then the following transmission components must be checked for damage caused by incorrect installation: ̵ Driveshaft splines. ̵ Driveshaft circlips. ̵ Driveshaft oil seal. *Note: If the only fault is transmission fluid leakage from a driveshaft seal because the driveshaft is not fully locked into position and the vehicle is only at delivery mileage (less than 100 miles/160 km), then it is acceptable to push the driveshaft back into position if a visual inspection shows that the driveshaft seal has not been damaged, (and then check/top up the transmission oil level). Refer to the operation codes for driveshaft removal and re-fitment shown in sections 47.15. for both V6 and 4-cylinder powertrains from the Emira service notes which are available to view from the aftersales dealer portal at: https://dealerportal.uslotservice.lotuscars.com/log-in - from the Aftersales tab, select Service Manuals > Emira.
Affected Regions:
United States &
Canada
Affected Volume: Number:
1117
131-24030
USA
Copy files should be maintained by:
Service Manager
Service Reception
Supervisor
Parts Manager
TITLE
Inspection of transmission driveshaft fitment/security if specific faults are reported.
REASON
Lotus
has received reports from the dealer network of:
̵ Loss of drive.
̵ Oil leaking from the transmission driveshaft seals.
̵ Transmission noise while driving.
It has been identified that a potential cause of these issues is
as a result of the driveshafts not being fully locked in position
into the transmission at the time of vehicle assembly.
VIN range affected
Start of production for both Emira V6 powertrain (manual and automatic) and Emira 4-cylinder DCT up
to 2025 model year VIN SCCLEKAX4RHB12094 inclusive.
ACTION
If an Emira owner contacts you, or you are presented with a vehicle within the affected VIN range
which has any of the transmission faults listed above*, then the following transmission components
must be checked for damage caused by incorrect installation:
̵ Driveshaft splines.
̵ Driveshaft circlips.
̵ Driveshaft oil seal.
*Note: If the only fault is transmission fluid leakage from a driveshaft seal because the driveshaft is
not fully locked into position and the vehicle is only at delivery mileage (less than 100 miles/160 km),
then it is acceptable to push the driveshaft back into position if a visual inspection shows that the
driveshaft seal has not been damaged, (and then check/top up the transmission oil level).
Refer to the operation codes for driveshaft removal and refitment shown in sections 47.15. for both
V6 and 4-cylinder powertrains from the Emira service notes which are available to view from the
aftersales dealer portal at: https://dealerportal.uslotservice.lotuscars.com/log-in - from the Aftersales
tab, select Service Manuals > Emira.
Important: Have a mobile device such as a tablet or phone ready and operating in photo
or video mode, that can record evidence of any transmission oil leakage from the driveshaft
seal and/or damage to the driveshaft splines or circlips.
Any claims relating to the contents of this Technical Service Bulletin must be supported with video or
photographic evidence.
Continued...
LOTUS
CARS AMERICAS
9201 Circuit of the Americas Blvd, Austin, TX 78617. Michigan Branch:35255 Glendale St., Livonia, MI 48150
SERVICE BULLETIN QBP CLASS 3
Date:
Affected Models:
10.28.2024 All Emira Vehicles From Start
of Production to Specific
2025 Model Year VIN
CHARGES
A warranty claim may be submitted with a valid prior authorisation number on the Lotus
Dealer
Connect system for any combinations listed below as required:
Left Side Driveshaft Renewal
Fitment of applicable left side driveshaft part number (and driveshaft seal if required), 2 x rear brake
caliper bolts (8891014034) 1 x driveshaft nut (A132F6029F) and a sublet value for a suitable quantity
of transmission fluid if required. Applicable labour time/vehicle for either V6 or 4-cylinder powertrain.
Use operation code 47.15.01-02. Use A code 2 and B code 14.
Right Side Driveshaft Renewal
Fitment of applicable right side driveshaft part number (and driveshaft seal if required), 2 x rear brake
caliper bolts (8891014034) 1 x driveshaft nut (A132F6029F) and a sublet value for a suitable quantity
of transmission fluid if required. Applicable labour time/vehicle for either V6 or 4-cylinder powertrain.
Use operation code 47.15.02-02. Use A code 2 and B code 14.
Left Side Driveshaft Seal Renewal Only
Fitment of applicable left side driveshaft seal, 2 x rear brake caliper bolts (8891014034) 1 x driveshaft
nut (A132F6029F) and a sublet value for a suitable quantity of transmission fluid if required.
Applicable labour time/vehicle for either V6 or 4-cylinder powertrain. Use operation code 47.15.05-02.
Use A code 2 and B code 14.
Right Side Driveshaft Seal Renewal Only
Fitment of applicable right side driveshaft seal, 2 x rear brake caliper bolts (8891014034) 1 x
driveshaft nut (A132F6029F) and a sublet value for a suitable quantity of transmission fluid if required.
Applicable labour time/vehicle for either V6 or 4-cylinder powertrain. Use operation code 47.15.06-02.
Use A code 2 and B code 14.
Left Side Driveshaft Refitting Only
Locking driveshaft into transmission - left side, 0.8 hours labour/vehicle Use operation code 47.15.1300 (and a sublet value for a suitable quantity of transmission oil if required). Use A code 2 and B code
14.
Right Side Driveshaft Refitting Only
Locking driveshaft into transmission - right side, 0.8 hours labour/vehicle Use operation code
47.15.14-00 (and a sublet value for a suitable quantity of transmission oil if required). Use A code 2
and B code 14.
Please quote bulletin number TSB-131-24030 in the remarks section of and of the above warranty
claims submitted.
Ends.
LOTUS
CARS AMERICAS
9201 Circuit of the Americas Blvd, Austin, TX 78617. Michigan Branch:35255 Glendale St., Livonia, MI 48150
SERVICE BULLETIN QBP CLASS 3
TSB-131-24030
continued page 2
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TSB-131-24030
Replacement Service Bulletin Number:
MFR Communication Date: 2024-10-28
MFR Internal Campaign ID/Software Version: TSB-131-24030
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System: Transmission Driveshaft
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover
/Jaguar
, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA
cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis(or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- 【2026 Most-cost-effective LAUNCH Scanner】 LAUNCH X431 CRP919XBT, upgraded from CRP919X, includes a VCI for wireless data transmission (3Mbps max). ✅HARDWARE: MTK's chip + doubled memory & battery capacity ensure 5X faster & smoother navigation than OBD2 scanner diagnostic tools in the same category. ✅SOFTWARE: Its productive features (same as LAUNCH X431 scanners), 99% car coverage, more-frequent software renewals, field-tested accurate database, are superior to most competitors on market.
- 【FCA
AutoAuth + CANFD&DOIP】 LAUNCH X431 CRP919XBT uses a newly-developed wireless connector “DBSCar VII VCI” instead of a connection cable. You can be at workbench or any location around vehicle while running diagnostics. ✅With this VCI, this OBD2 scanner supports new protocols of tomorrow: CANFD for 2020-now GM&Chrysler
Models; DoIP for Volvo
, Land Rover
/Jaguar
, BMW
F/G Chassis. ✅And with integrated AutoAuth, you can diagnose 2018+ FCA
SGW-equipped cars without separate adapters. - 【ECU Coding & 35+ Reset Services】 For just 500 bucks you’ll get fully-featured ECU coding & resets/relearns from LAUNCH X431 CRP919XBT. 👍Online Code for VW
/Audi
/Skoda/Ford
/Lincoln
/Mazda
; 👍Open/close hidden functions; 👍Personalized modifications/changeover; 👍Shortcut to 35+ special functions like “Oil Reset/Brake Reset/Throttle Adaptation” etc., to quickly meet your daily repair needs. 🚩100+ more resets/relearns are under “car brand – system” waiting to explore. - 【All Brands All System Scan】 With a market focus, LAUNCH X431 CRP919XBT boasts a complete filed-tested database for your deeper dive into car's health to handle more complex repairs. Back up by leading LAUNCH technology, you can do all system coding/scans/read&clear codes/bidirectional control/resets covering 99% cars, unlike many scanners for cars on market (x-tool) with fake advertisement claiming to “do it all” but in reality, they ONLY work for certain cars with limited services.
- 【Bi-directional Control】This LAUNCH bidirectional scan tool CRP919XBT allows technicians to command specific vehicle components (like solenoids, relays) to monitor real-time working status, without using the vehicle controls. Achieve fast, accurate diagnostics and take control like never before. Turn on the radiator fan, modulate the throttle, open or close windows, operate mirrors, Injector Buz Test, turn on interior and exterior lights, sound horn, etc.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
- 【Newly Added 3 Reset Functions】CRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and Vehicle Information, O2 Sensor Test, EVAP Test of Fuel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your vehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.4 inches Screen Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
This product presentation was made with AAWP plugin.
Last update on 2026-06-05 / Affiliate links / Images from Amazon Product Advertising API




