Service Bulletin
September 13, 2024

24-012
Version 2

Product Update: 2023 HR-V Rear Window Inspection
Supersedes 24-017, dated July 17, 2024, to update the parts information in yellow.
AFFECTED VEHICLES
Year

Model

Trim Level

VIN Range

2023

HR-V

ALL

Check the iN VIN status for eligibility

REVISION SUMMARY
Under PARTS INFORMATION, rear windshield glass disposal was added.
BACKGROUND
During the assembly process for some vehicles, the sealer used to secure the rear glass have contacted the defroster
heating elements. This can lead to a hot-spot and the weakening of the glass over time as the defroster is used.
CUSTOMER NOTIFICATION
Owners of the affected vehicles will be sent a notification of this campaign. Do an iN VIN status inquiry to verify eligibility.
Some vehicles affected by this campaign may be in the dealer’s new or used car inventory. Repair these vehicles before
they are sold.
CUSTOMER REIMBURSEMENT
If the customer previously paid to have the rear glass replaced, even if they no longer own the vehicle, they may be eligible
for reimbursement. If the customer received a customer letter refer to the attached reimbursement form for eligibility
requirements, instructions, and the reimbursement procedure.
For any questions and support please call American Honda’s Customer Support & Campaign Center at (1-888-234-2138).
CORRECTIVE ACTION
Inspect the rear glass. If necessary, replace the rear windshield glass.

CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment,
and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not
assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact
an authorized Honda automobile dealer.

© 2024 American Honda Motor Co., Inc. – All Rights Reserved

Page 1 of 15

PARTS INFORMATION
NOTE:
 This is a VIN controlled part; dealers must provide a valid VIN to order parts.
 As of August 29, 2024, the removed rear windshield glass under this service bulletin may be disposed of immediately
in accordance with state and local regulations. The published retention policy remains in effect for all other parts.
 If you have any questions about this exception or other parts retention issues, contact the WPI Administrative Office at
937-642-2737.
2WD Vehicles
Part Name

Part Number

Quantity

LX 2WD Rear Windshield Kit

06732-3W0-306

1

Sport, EX-L 2WD Rear Windshield Kit

06732-3W0-305

1

Part Name

Part Number

Quantity

LX AWD Rear Windshield Kit

06732-3W1-306

1

Sport, EX-L AWD Rear Windshield Kit

06732-3W1-305

1

AWD Vehicles

WARRANTY CLAIM INFORMATION
Inspection if rear windshield is not shattered.
NOTE: A photo of the VIN plate and two clear photos of the urethane sealer contacting the defroster grid around the
couplers must be included when submitting your claim, or the claim may be subject to a debit.


Sublet out to glass shop for rear windshield replacement with a PDF attachment of bill in the claim.
Operation
Number

Description

Flat
Rate
Time

Defect
Code

Symptom
Code

Template ID

Failed Part
Number

8325A0

Urethane sealer is not
adhering to the defroster grid.
No further action needed

0.3 hr

6GL00

GGE00

A24012A

73211-3W0-A01

Operation
Number

Description

Flat
Rate
Time

Defect
Code

Symptom
Code

Template ID

Failed Part Number

8325A1

2WD LX: Urethane sealer
adheres to the defroster
grid. Replace rear
windshield (Includes
photos)
2WD Sport/EXL: Urethane
sealer adheres to the
defroster grid. Replace rear
windshield (Includes
photos)

0.4 hr

6GL00

GGE00

A24012B

73211-3W0-A01

0.4 hr

6GL00

GGE00

A24012C

73211-3W0-305

AWD LX: Urethane sealer
adheres to the defroster
grid. Replace rear
windshield (Includes
photos)

0.4 hr

6GL00

GGE00

A24012D

73211-3W0-A11

8325A1

8325A1

Page 2 of 15

8325A1

AWD Sport/EXL: Urethane
sealer adheres to the
defroster grid. Replace rear
windshield (Includes
photos)

0.4 hr

6GL00

GGE00

A24012E

73211-3W0-306

Inspection if rear windshield is shattered.
NOTE: A photo of the VIN plate and two clear photos of the shattered rear windshield must be included when
submitting your claim, or the claim may be subject to a debit.
 Sublet out to glass shop for rear windshield replacement with a PDF attachment of bill in the claim.
Operation
Number

Description

Flat
Rate
Time

Defect
Code

Symptom
Code

Template ID

Failed Part Number

8321B8

2WD LX: Replace shattered
rear windshield – (Includes
photos & cleaning of
broken glass)

1.2 hr

6GL00

GGE00

A24012F

73211-3W0-A01

8321B8

2WD Sport/EXL: Replace
shattered rear windshield –
(Includes photos &
cleaning of broken glass)

1.2 hr

6GL00

GGE00

A24012G

73211-3W0-305

8321B8

AWD LX: Replace shattered
rear windshield – (Includes
photos & cleaning of
broken glass)

1.2 hr

6GL00

GGE00

A24012H

73211-3W0-A11

8321B8

AWD Sport/EXL: Replace
shattered rear windshield –
(Includes photos &
cleaning of broken glass)

1.2 hr

6GL00

GGE00

A24012J

73211-3W0-306

File Attachment Instructions for a Sublet Claim:
Select G1 from the sublet code, enter the invoice number, amount and then upload the required bulletin photos and
PDF copy of the glass shop invoice.

Page 3 of 15

INSPECTION PROCEDURE
If the rear windshield glass is not shattered, do the following:
1. Lift the tailgate and remove the following trim pieces:

2. Remove the tailgate trim panel.

Page 4 of 15

3. Inspect the urethane sealer for contact with the defroster grid lines.

4. For incorrect urethane sealer application take a photo of the VIN plate and two photos, one of each coupler where
the urethane contacts the defroster grid line. Then, proceed to step 4 of the REPAIR PROCEDURE.
For correct urethane sealer application: the inspection is complete, and no repair is required.

Page 5 of 15

If the rear windshield glass is shattered, do the following:
NOTE: Make sure that the vehicle does not have any visual body damage that could have caused the rear glass to shatter.

1. Take a photo of the VIN plate plus two photos of the broken windshield and upload to the warranty claim.
2. Clean any debris in the rear cargo area, and inside of the rear tailgate, caused by the shattered glass.
3. If there are no signs of damage to the bumpers, tailgate, wiper, or body alignment issues, and the tailgate opens and
closes properly, go to the REPAIR PROCEDURE and replace the rear windshield glass.
If there are signs of visible body damage (from a vehicle accident), refer to the DPSM for evaluation.

Page 6 of 15

REPAIR PROCEDURE
1. Lift the tailgate and remove the following trim pieces:

2. Remove the tailgate trim panel.

3. Disconnect the connectors.

Page 7 of 15

4. Remove the following:

5. Remove the rear wiper motor.

Page 8 of 15

6. Remove the tailgate spoiler.

7. Remove the tailgate trim panel.

Page 9 of 15

8. Remove the side seals and fasteners from the edge of the rear window.
NOTE: Cut the seal with a utility knife, if necessary.

9. Apply protective tape along the inside and outside edges of the tailgate.

Page 10 of 15

10. Make a hole through the adhesive (from inside the vehicle) at a corner of the rear window, then separate the adhesive.
NOTE: Hold the piano wire as close to the rear window as possible to prevent damage to the tailgate.

11. With an assistant’s help, remove the rear window.
12. Scrape off any remaining original adhesive. Then, clean the bonding surface with a shop towel dampened with
isopropyl alcohol. Prevent any oil, grease, or water from contacting the clean surface.
13. Install the tailgate trim panel.

Page 11 of 15

14. Install the following on the new glass:
NOTE:




Before installing the fasteners and spacer, apply glass primer to the area where the adhesive tape will be
applied.
Do not touch the rear window where the adhesive will be applied.
Make sure all fasteners line up with the alignment marks.

15. Install the rubber dams and side seals with adhesive tape on the inside facing of the rear window.

Page 12 of 15

16. Attach the new fasteners with the adhesive tape to the rear window opening flange of the tailgate.

17. Apply a light coat of primer, then lightly wipe it off with a gauze or cheesecloth.

Page 13 of 15

18. Apply a light coat of body primer to any exposed paint or metal around the flange where the new adhesive will be
applied. Let primer dry for at least 10 minutes.

19. Apply the urethane.
NOTE: Make sure the urethane does not contact the defroster grid lines.

Page 14 of 15

20. Inspect the applied urethane.

NOTE:



For more information refer to the service information; enter keyword Rear Window, then select Rear Window
Area from the list.
The applied urethane cannot contact the defroster grid lines, especially at the bottom area of the glass where
space is limited during installation.

21. Install the new window, leaving a 5 mm–6 mm space between the urethane and defroster gridlines.
22. Install the remaining parts in reverse order.
NOTE:




Clean the fastener surface and prevent oil, grease, or water from getting on the surface.
Inspect the fastener and replace if it is distorted.
Before installing a new fastener, apply primer to the area where the adhesive tape will be applied.

Page 15 of 15