1. Driver seatbelt is detected as unbuckled.
2. Driver is not detected as present.
3. Driver door is detected as open.
1. Driver seatbelt is detected as unbuckled
2. Driver is not detected as present
3. Driver door is detected as open
4. One or more of the sensors used to detect the three conditions above (seatbelt buckle, seat occupancy, door latch) is not
working as expected
Your vehicle will also automatically shift into Park if any of these conditions is true:
• Door is detected as open

1500

Owner's Manual

Troubleshooting
• Seatbelt is detected as unbuckled while speed is less than 0.1mph (0.15 km/h) in Drive or Reverse
• No driver activity is detected for 60 seconds
NOTE: If your vehicle is running software from 2015 or later, it will automatically shift into Park immediately when all three of
the conditions above are true, regardless of vehicle speed or last detected press of the brake / accelerator pedal.
Your vehicle will also automatically shift into Park if all of these conditions are true:
• Vehicle hold is engaged
• Your vehicle is in Drive (D) or Reverse (R)
• Driver door is detected as open
NOTE: Your vehicle will also automatically shift into Park when a charge cable is connected to the charge port.
What to do:
For more information on automatic shifting into Park, see Shifting on page 396Shifting on page 402.

ESP_a118
Assist for low brake performance activated
To stop, keep brake pedal firmly pressed
What this alert means:
Hydraulic Fade Compensation is active. This brake assist function activates temporarily to make sure you have full braking
capability in conditions where reduced braking performance is detected by your vehicle.
When this assist function activates, you may feel the brake pedal pull away from your foot and notice a strong increase in brake
pressure. You may also hear a pumping sound coming from the brake hydraulic unit at the front of the vehicle. This will usually
last for a few seconds, depending on road surface and vehicle speed. This is completely normal and does not indicate any
issue with your vehicle.
What to do:
Continue to press the brake pedal as you normally would, and do not "pump" (repeatedly press and release) the pedal as this
will interrupt the function.
This alert will clear when your vehicle comes to a stop or you are no longer pressing the brake pedal. It may still be displayed
for up to 5 seconds afterward.
Reduced braking performance is usually temporary, and can occur for a number of reasons including high brake temperatures
after heavy brake use, or driving in extremely cold or wet conditions. It can also indicate that your brake pads or rotors have
worn to the point that normal replacement is needed.
If you continue to experience reduced braking performance which does not improve over time, please contact Tesla service at
your convenience for a brake inspection.
For more information, see Hydraulic Fade Compensation on page 455.

PCS_a016
Cannot charge - Poor grid power quality possible
Retry / Try other charge location or Supercharging
What this alert means:
Charging has stopped due to a condition that prevents your vehicle from charging with AC power. DC fast charging /
Supercharging should still function as expected.
This may be due to power supply disturbances caused by the external charging equipment or by the electrical power grid. In
some cases, this condition may be the result of using nearby electric devices that draw a lot of power.

Owner's Manual

1501

Troubleshooting
If these possible causes can be ruled out, then a condition with your vehicle itself may also be affecting AC charging.
What to do:
If this alert is accompanied by another alert that specifies the condition affecting AC charging, start by investigating that alert.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
If this alert persists when attempting to charge at multiple locations and with different charging equipment, it is recommended
that you schedule service.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a017
Charging stopped - Power lost while charging
Check power source and charging equipment
What this alert means:
Power has been lost during charging. This could result from the charging equipment losing power from the source (for
example, a wall outlet) or from an issue with the charging equipment.
What to do:
This alert is often accompanied by other alerts that can help you identify and troubleshoot the issue. Start by investigating any
other displayed alerts that relate to charging issues.
Alternatively, you can check Mobile Connector or Wall Connector status lights to confirm power to the device, and also refer
to the product owner’s manual for troubleshooting information based on blink codes. If using other (non-Tesla) external
charging equipment, check for a display or other user interface that provides troubleshooting help.
If there is clearly no power to the charging equipment, check the circuit breaker for the wall outlet / Wall Connector to make
sure it has not tripped.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.

1502

Owner's Manual

Troubleshooting
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a019
Power grid or vehicle issue limiting AC charging
Unplug and retry / Try different charging location
What this alert means:
Charging speed has been reduced due to a condition that affects your vehicle’s ability to charge with AC power. DC fast
charging / Supercharging should still function as expected.
This may be due to power supply disturbances caused by the external charging equipment or by the electrical power grid. In
some cases, this condition may be the result of using nearby electric devices that draw a lot of power.
If these possible causes can be ruled out, then a condition with your vehicle itself may also be affecting AC charging.
What to do:
If this alert is accompanied by another alert that specifies the condition affecting AC charging, start by investigating that alert.
Further troubleshooting tips based on equipment type:
• If using a Mobile Connector, try charging the vehicle with a different wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the original wall outlet.
◦ If the vehicle still does not charge, the issue may be with the Mobile Connector.
• If using a Wall Connector, try charging the vehicle with different charging equipment like a Mobile Connector powered by a
separate wall outlet.
◦ If the vehicle starts to charge, the issue was likely with the Wall Connector.
If the issue is with the original wall outlet or the Wall Connector, contact an electrician to inspect the wiring connection.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
If this alert persists when attempting to charge at multiple locations and with different charging equipment, it is recommended
that you schedule service.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a032
Poor electric grid power quality detected
Try different charging station or location
What this alert means:
Charging speed has been reduced or charging has been interrupted due to a condition that affects your vehicle’s ability to
charge with AC power. DC fast charging / Supercharging should still function as expected.
The onboard charger in your vehicle has detected power supply disturbances in the electrical power grid. These disturbances
interfere with your vehicle's charging process.
Typical causes of these power supply disturbances include:

Owner's Manual

1503

Troubleshooting
• Issues with the building wiring and/or the wall outlet.
• Issues with the external charging equipment.
• Other large electric devices, such as washing machines or air conditioning units, that temporarily draw a lot of power or
otherwise disturb the electrical power grid.
• External conditions affecting the electrical power grid.
What to do:
As this alert is usually specific to external charging equipment and power sources, and it does not typically indicate an issue
with your vehicle that can be resolved by scheduling service, it is recommended that you:
• Try charging with different wall outlets.
• Try charging again (disconnect and reconnect to retry) when other large electric devices are not drawing power.
• Try charging with multiple, different types of charging equipment at different locations.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a052
External charging equipment not providing power
Check power source or try different equipment
What this alert means:
Charging cannot begin due to a condition that prevents your vehicle from charging with AC power. DC fast charging /
Supercharging should still function as expected.
Your vehicle has requested AC power from the external charging equipment, but the onboard charger does not detect any
supply voltage coming from the equipment.
This can sometimes be caused by a hardware issue specific to the external charging equipment, which prevents the charging
equipment from switching power to the vehicle on or off when requested. It could also occur due to another condition
affecting the external charging equipment, the power source it is connected to, or your vehicle itself.
What to do:
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
Try charging with multiple, different types of charging equipment.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a053
Charge rate reduced - Unexpected voltage drop
Remove extension cords / Have wiring inspected
What this alert means:
Charging speed has been reduced because the onboard charger in your vehicle has detected a large voltage drop during
charging.
Likely causes of this issue include:
1504

Owner's Manual

Troubleshooting
• Problems with the building wiring and/or the wall outlet.
• An extension cord or other wiring that cannot support the requested charge current.
This issue can also result from turning on electric devices that draw a lot of power from the same branch circuit while the
vehicle is charging.
What to do:
If this issue has occurred multiple times at your normal charging location, contact an electrician to inspect the electrical
installation. They should check the following:
• Any installed charging equipment and its connection to the building wiring.
• The building wiring, including any wall outlet used with a Mobile Connector.
• The electrical connection to the power utility line where it enters the building.
Discuss with the electrician whether the charge current on the vehicle should be lowered, or if the installation should be
upgraded to support a higher charge current.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a054
Charging stopped due to large voltage drop
Remove extension cords / Have wiring inspected
What this alert means:
Charging has been interrupted because the onboard charger in your vehicle has detected an unusually large voltage drop.
Likely causes of this issue include:
• Problems with the building wiring and/or the wall outlet.
• An extension cord or other wiring that cannot support the requested charge current.
This issue can also result from turning on electric devices that draw a lot of power from the same branch circuit while the
vehicle is charging.
What to do:
If this issue has occurred multiple times at your normal charging location, contact an electrician to inspect the electrical
installation. They should check the following:
• Any installed charging equipment and its connection to the building wiring.
• The building wiring, including any wall outlet used with a Mobile Connector.
• The electrical connection to the power utility line where it enters the building.
Discuss with the electrician whether the charge current on the vehicle should be lowered, or if the installation should be
upgraded to support a higher charge current.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.

Owner's Manual

1505

Troubleshooting
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a073
External charging equipment error detected
Try different charging equipment
What this alert means:
AC charging cannot begin due to a condition that prevents your vehicle from charging with AC power. DC fast charging /
Supercharging should still function as expected.
Your vehicle's onboard charger is detecting input voltage at the charge port when no power has been requested from the
external charging equipment, which indicates the external charging equipment is not functioning as expected.
This can sometimes be caused by a hardware issue specific to the external charging equipment, which prevents the charging
equipment from switching power to the vehicle on or off when requested. It could also occur due to another condition
affecting the external charging equipment, or a condition affecting your vehicle itself.
What to do:
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
Try charging with multiple, different types of charging equipment.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

PCS_a090
Charging slowed - Some AC phases not powered
Check power source and charging equipment
What this alert means:
Charging speed has been reduced due to a condition that affects your vehicle’s ability to charge with AC power. DC fast
charging / Supercharging should still function as expected.
Your vehicle's onboard charger has detected that one or more power converters is not receiving the necessary AC input
voltage. For example: during three-phase charging, one phase might be missing from the AC input power provided by the
external source. This could occur due to a condition affecting the external charging equipment, the power source it is
connected to, or your vehicle itself.
What to do:
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
Try charging with multiple, different types of charging equipment.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector or Wall Connector status lights, refer to the product's Owner's
Manual at Charging & Adapter Product Guides.

1506

Owner's Manual

Troubleshooting
PM_a092 / PMF_a092 / PMR_a092
PM_a092 / PMF_a092 / PMR_a092 / PMREL_a092 / PMRER_a092
Powertrain issue detected - Schedule service
Issue may persist even if functionality is restored
What this alert means:
Your vehicle's powertrain requires service. Power, speed, and acceleration may be reduced, and your vehicle may need to shut
down while driving.
This alert indicates a persistent condition requiring powertrain inspection and service.
Even if this alert clears after the current drive and does not return during subsequent drives, service is required to resolve the
powertrain issue your vehicle has detected.
What to do:
It is recommended that you schedule service for your vehicle's powertrain at your earliest opportunity.
Without service, your vehicle may continue to have reduced power, speed, and acceleration, may experience conditions that
require it to shut down while driving, or may become unable to drive.

TAS_a313
Adaptive ride control degraded
Ride comfort may be reduced
What this alert means:
There is an issue with your vehicle’s Adaptive Suspension Damping system. As a result, the system cannot provide real-time
adjustments to the suspension system to optimize both ride and handling.
Instead, all dampers are receiving fixed current. Your ride may be softer or firmer than usual.
What to do:
If this alert persists throughout subsequent drives, schedule service at your earliest convenience. Your vehicle is OK to drive
in the meantime.
This alert is accompanied by a yellow indicator light on the instrument paneltouchscreen. For more information, see Air
Suspension on page 465Suspension on page 496.

TAS_a313
Adaptive ride control degraded
Ride comfort may be reduced
What this alert means:
There is an issue with your vehicle’s Adaptive Suspension Damping system. As a result, the system cannot provide real-time
adjustments to the suspension system to optimize both ride and handling.
Instead, all dampers are receiving fixed current. Your ride may be softer or firmer than usual.
What to do:
If this alert persists throughout subsequent drives, schedule service at your earliest convenience. Your vehicle is OK to drive
in the meantime.
This alert is accompanied by a yellow indicator light on the instrument paneltouchscreen. For more information, see Air
Suspension on page 465Suspension on page 496.

Owner's Manual

1507

Troubleshooting
TAS_a314
Adaptive ride control disabled
Drive with caution
Adaptive ride control unavailable
Vehicle speed limited - Proceed with caution
What this alert means:
There is an issue with your vehicle’s Adaptive Suspension Damping system. As a result, the system cannot provide real-time
adjustments to the suspension system to optimize both ride and handling, and your ride may be softer than usual.
What to do:
If this alert persists throughout subsequent drives, schedule service at your earliest convenience. Your vehicle is OK to drive
in the meantime.
This alert is accompanied by a red indicator light on the instrument paneltouchscreen. For more information, see Air
Suspension on page 465Suspension on page 496.

TAS_a314
Adaptive ride control disabled
Drive with caution
Adaptive ride control unavailable
Vehicle speed limited - Proceed with caution
What this alert means:
There is an issue with your vehicle’s Adaptive Suspension Damping system. As a result, the system cannot provide real-time
adjustments to the suspension system to optimize both ride and handling, and your ride may be softer than usual.
What to do:
If this alert persists throughout subsequent drives, schedule service at your earliest convenience. Your vehicle is OK to drive
in the meantime.
This alert is accompanied by a red indicator light on the instrument paneltouchscreen. For more information, see Air
Suspension on page 465Suspension on page 496.

UI_a004
Front trunk open
Proceed with caution
What this alert means:
Your vehicle's front trunk (hood) is detected open while driving.
This alert indicates at least one of the two latches securing the hood, the front trunk primary and/or secondary latch, cannot
be confirmed closed (confirmed as fully secured) when your vehicle is shifted into a gear other than Park.
What to do:
As this condition may lead to the front trunk opening while driving, it is recommended that you drive carefully until you can
safely bring your vehicle to a stop and shift into Park.
Once your vehicle is parked, check the front trunk (hood) to make sure it is fully closed (both latches are fully engaged). For
more information, see Closing instructions for the Front Trunk on page 181.
The alert should clear once your vehicle is shifted into Park. However, it may return once you start driving if you do not first
inspect and fully secure the hood.

1508

Owner's Manual

Troubleshooting
If this alert persists across multiple drives, or occurs with increasing frequency over several drives, it is recommended that you
schedule service at your earliest convenience.
For more information on the front trunk, see Front Trunk on page 181.

UI_a006
Service is required
Schedule service now
What this alert means:
This alert is set remotely by Tesla when a condition requiring service is detected on your vehicle.
This alert can be set due to various conditions. When you schedule service, more information should be available.
This alert can only be cleared by a service technician after your vehicle has been serviced.
What to do:
As this alert can be present due to various conditions, it is recommended that you schedule service at your earliest
convenience.

UI_a013
Air pressure in tires very low
PULL OVER SAFELY - Check for flat tire
What this alert means:
This alert indicates that one or more of the tires on your vehicle is extremely low or flat.
The tire pressure monitoring system (TPMS) has detected that the air pressure in one or more of your tires is significantly
lower than the recommended cold tire pressure.
What to do:
You should pull over carefully as soon as possible. In a safe location, check for a flat tire.
You can request Tesla roadside assistance options (mobile tire, loaner wheel, tow) if required. See Contacting Tesla Roadside
Assistance on page 914 for more information.
In a non-emergency situation, it is recommended that you visit a local tire shop for assistance or schedule service using your
Tesla Mobile App.
See Maintaining Tire Pressures on page 742 for detailed information on where to find the recommended cold pressure (RCP)
for your vehicle's tires, how to check tire pressures, and how to keep your tires properly inflated.
The alert will clear once the TPMS has a consistent tire pressure measurement for each of your tires within 3 psi of the
recommended cold pressure.
• The alert and Tire Pressure indicator light may still be present immediately after you have filled your tires to the
recommended cold pressure, but both should clear once you have driven a short distance.
• You may need to drive over 15 mph (25 km/h) for at least 10 minutes for the Tire Pressure Monitoring System to measure
and report your updated tire pressures.
For more information on tire pressure and inflation, see Tire Care and Maintenance on page 742.

UI_a014
Air pressure below recommendation for tires
Check pressure and refill air as needed
What this alert means:
Owner's Manual

1509

Troubleshooting
This alert does NOT indicate that there is a flat tire.
The tire pressure monitoring system (TPMS) has detected that the air pressure in one or more of your tires is at least 20%
lower than the recommended cold tire pressure.
See Maintaining Tire Pressures on page 742 for detailed information on where to find the recommended cold pressure (RCP)
for your vehicle's tires, how to check tire pressures, and how to keep your tires properly inflated.
This alert may appear in cold weather because the air in your tires naturally contracts when it becomes cold, decreasing tire
pressures.
What to do:
Add air to maintain the recommended cold tire pressure. Although drops in tire pressure are expected in colder weather, the
recommended cold tire pressure should be maintained at all times.
The alert may clear as the vehicle is driven. This is because the tires will warm up and the tire pressure will increase. Even if the
alert clears, the tires should still be refilled with air once they have cooled.
The alert will clear once the Tire Pressure Monitoring System detects that each of your tires is inflated to the recommended
cold pressure.
• The alert and Tire Pressure indicator light may still be present immediately after you have filled your tires to the
recommended cold pressure, but both should clear once you have driven a short distance.
• You may need to drive over 15 mph (25 km/h) for at least 10 minutes for the Tire Pressure Monitoring System to measure
and report your updated tire pressures.
If you repeatedly see this alert for the same tire, have the tire inspected for a slow leak. You can visit a local tire shop or
schedule service using your Tesla Mobile App.
For more information on tire pressure and inflation, see Tire Care and Maintenance on page 742.
For more information on tire pressure and inflation, see Tire Care and Maintenance on page 742.

UI_a137
Active service connection to vehicle
Service performing remote diagnostics
What this alert means:
A service technician is remotely logged into your vehicle for diagnosis or repair. You may notice some loss of Infotainment
functionality while the connection persists, but this alert does not indicate an issue with your vehicle.
Your vehicle is OK to drive.
What to do:
This alert should clear automatically after the technician completes vehicle diagnosis or repair. You may find it necessary to
restart your touchscreen to restore full Infotainment functionality after the alert has cleared. For more information, see
Restarting the Touchscreen in your vehicle's Do It Yourself Guide.
If this alert does not clear after 24 hours, it is recommended that you schedule service via your Tesla Mobile App or with an
independent service provider. Please note that independent service provider options may vary, based on your vehicle
configuration and your location.

UMC_a001
Unable to charge with Mobile Connector
Inadequate outlet grounding - Try another outlet
What this alert means:

1510

Owner's Manual

Troubleshooting
The Mobile Connector has detected that the electrical outlet has insufficient grounding, likely caused by an inadequate or
missing ground connection.
This does not indicate an issue with your Mobile Connector or vehicle, but instead points to an issue with the wall outlet /
electrical installation the Mobile Connector is connected to.
What to do:
Have the electrical installation inspected by an electrician. Your electrician should make sure there is proper grounding at your
circuit breaker or power distribution box, and also make sure that appropriate connections are made to the outlet, before you
attempt to plug in the Mobile Connector again.
If you need to charge in the meantime, try charging using a different outlet, at another location, or with another type of
charging station.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.

UMC_a002
Unable to charge - Mobile Connector GFCI tripped
Unplug charge handle from charge port and retry
What this alert means:
The vehicle cannot charge because the ground-fault circuit interrupter (GFCI) in the Mobile Connector has tripped.
Like the GFCI in a wall outlet, this feature is designed to stop the flow of electricity when there is a problem. It has interrupted
charging to protect your vehicle and the charging equipment.
This could happen for many reasons. The problem could be in the charge cable, the charge handle, the charge port, or even an
onboard vehicle component.
What to do:
Inspect the charge port and the charge handle for pooled water or unusual levels of moisture. If you find excessive moisture,
wait and let both the inside area of the charge port and the exposed portion of the charge handle dry sufficiently before trying
again.
Inspect the charge equipment for damage.
• If the cable is in any way damaged or deteriorated, do not use it. Try different charging equipment instead.
• If the cable is in good condition, try charging again with the same Mobile Connector.
If the issue persists and prevents charging, try charging with different charging equipment.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.

UMC_a004
Unable to charge with Mobile Connector
Voltage too high / Try a different wall outlet
What this alert means:
Owner's Manual

1511

Troubleshooting
The vehicle cannot charge, or charging is interrupted, because either the Mobile Connector:
• Detects the wall outlet voltage is too high, or
• Detects an unexpected increase in supply voltage from the wall outlet.
What to do:
Try charging the vehicle with a different wall outlet. If the vehicle starts to charge, the issue was likely with the original wall
outlet. Contact an electrician to inspect the building wiring connection to that outlet.
If the vehicle still does not charge when you try a different wall outlet, try charging at a different location.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.

UMC_a005
Unable to charge with Mobile Connector
Voltage too low / Try a different wall outlet
What this alert means:
The vehicle cannot charge, or charging is interrupted, because either the Mobile Connector:
• Does not detect enough supply voltage from the wall outlet, or
• Detects an unexpected drop in supply voltage from the wall outlet.
What to do:
Try charging the vehicle with a different wall outlet. If the vehicle starts to charge, the issue was likely with the original wall
outlet. Contact an electrician to inspect the building wiring connection to that outlet.
If the vehicle still does not charge when you try a different wall outlet, try charging at a different location.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.

UMC_a007
Mobile Connector control box temperature high
Let Mobile Connector cool to resume charging
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature inside its control box housing.
What to do:
Make sure the Mobile Connector is not covered by anything, and that there is no heat source nearby. If the problem persists in
normal ambient temperatures (under 100°F or 38°C), service is required.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 690 for more details.

1512

Owner's Manual

Troubleshooting
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.

UMC_a008
Unable to charge - Wall plug temperature high
Wall outlet and wiring inspection recommended
What this alert means:
High temperature detected by Mobile Connector alerts indicate the outlet used to charge is becoming too warm, so charging
has stopped to protect the outlet.
This does not indicate an issue with your Mobile Connector or vehicle, but instead points to an issue with the wall outlet /
electrical installation the Mobile Connector is connected to.
A warm outlet may be caused by a plug that is not fully inserted, a loose building wiring connection to the outlet, or an outlet
that is beginning to wear out.
What to do:
Make sure your adapter is fully plugged into the outlet. If charging speed does not return to normal, contact an electrician to
inspect the outlet and building wiring connections to the outlet and complete any repairs needed.