NHTSA ID Number: 11006911
Manufacturer Communication Number: fsd_12-5-1-2_082024.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
drive and displays the following message requesting you to drive manually.
Autopilot unavailable for current drive. Autopilot Strikeout - Attention warnings ignored.
For the rest of the drive, you must steer manually. Autosteer is available again on your next drive (after you stop and shift
Model SModel XModel 3Model Y into Park).
If you don't resume manual steering, Autosteer sounds a continuous chime, turns on the warning flashers, and slows the
vehicle to a complete stop.
Autopilot Suspension
Use of Autopilot features will be suspended if improper usage is detected.
Use of Autosteer and Full Self-Driving (Supervised) is suspended for a week when you or another driver of your vehicle
receives fivefivefivethreethree Autopilot "strikeouts." A strikeout is when the Autopilot system disengages for the remainder
of a trip after the driver receives several audio and visual warnings for inattentiveness.
You can see how many strikeouts are remaining before Autopilot access is suspended by touching Controls > Autopilot.
A strikeout is forgiven after 7 days, as long as you don't receive another strikeout in that time.
NOTE: If your access to Autosteer and Full Self-Driving (Supervised) is suspended, you also lose access to Autopark.
However, you can still use Traffic-Aware Cruise Control and all active safety features are still enabled.
There may be occasions where driver intervention is required and you must take over immediately to maintain safe driving.
Driver-initiated disengagements do not count as improper usage and are expected from the driver.
Owner's Manual
1273
Autopilot
Take Over Steering Immediately
In situations where Autosteer is unable to steer Model SModel XModel 3Model Y, Autosteer sounds a warning chime and
displays the following message on the touchscreeninstrument panel.
Take over immediately
When you see this message, TAKE OVER STEERING IMMEDIATELY.
1274
Owner's Manual
Autopilot
Traffic Light and Stop Sign Control
NOTE: Traffic Light and Stop Sign Control is a BETA feature and works best on roads that are frequently driven by Tesla
vehicles.
Traffic Light and Stop Sign Control attempts to stop at all traffic lights and may also stop at green lights.
Traffic Light and Stop Sign Control is designed to recognize and respond to traffic lights and stop signs, slowing
Model SModel XModel 3Model Y to a stop when using Traffic-Aware cruise control or Autosteer. This feature uses the
vehicle's forward-facing cameras, in addition to GPS data, and slows the car for all detected traffic lights, including green,
blinking yellow, and off lights in addition to stop signs and some road markings. As Model SModel XModel 3Model Y
approaches an intersection, the instrument clustertouchscreen displays a notification indicating the intention to slow down.
You must confirm that you want to continue or Model SModel XModel 3Model Y stops at the red line displayed on the
instrument clustertouchscreen's driving visualization.
WARNING: NEVER make assumptions and predict when and where Traffic Light and Stop Sign Control will stop or
continue through an intersection or road marking. From a driver's perspective, the behavior of Traffic Light and Stop
Sign Control may appear inconsistent. Always pay attention to the roadway and be prepared to take immediate action. It
is the driver's responsibility to determine whether to stop or continue through an intersection. Never depend on Traffic
Light and Stop Sign Control to determine when it is safe and/or appropriate to stop or continue through an intersection.
Before Using
Before using Traffic Light and Stop Sign Control, you must:
• Ensure that forward-facing cameras are unobstructed (see Cleaning a Camera on page 765Cleaning a Camera on page
766Cleaning a Camera on page 766Cleaning a Camera on page 766) and calibrated (see Drive to Calibrate Cameras on
page 107). Traffic Light and Stop Sign Control depends on the ability of the cameras to detect traffic lights, stop signs, and
road markings.
• Ensure that the latest version of maps has been downloaded to Model SModel XModel 3Model Y. Although Traffic Light
and Stop Sign Control primarily uses visual data received from the vehicle's cameras, greater accuracy is achieved when
using the most recent map data. To check which version of maps is currently downloaded, touch Controls > Software. You
must connect to a Wi-Fi network to receive updated maps (see Map Updates on page 697).
• Enable the feature. With the vehicle in Park, touch Controls > Autopilot > Traffic Light and Stop Sign Control. Once enabled,
Traffic Light and Stop Sign Control operates whenever Traffic-Aware Cruise Control or Autosteer is active.
How it Works
When Traffic Light and Stop Sign Control is enabled and you are using Autosteer, Traffic-Aware Cruise Control, or Full SelfDriving (Supervised), the instrument clustertouchscreen displays a popup message to inform you that an upcoming traffic
light, stop sign, or road marking has been detected. As it approaches the stop location, even at an intersection where the traffic
light is green, Model SModel XModel 3Model Y slows down and displays a red line to indicate where Model SModel XModel
3Model Y will stop. To continue through the intersection—even if the traffic light is green —you must pull the Autopilot stalk
toward you orpress down on the drive stalk orpress down on the drive stalk or briefly press the accelerator pedal to give the
vehicle permission to proceed. When you've confirmed that you want to proceed, the red stop line turns gray and
Model SModel XModel 3Model Y continues through the intersection and resumes your set cruising speed.
NOTE: If Model SModel XModel 3Model Y is approaching a green light and detects that a vehicle in front of you is continuing
through the intersection, Model SModel XModel 3Model Y continues through the intersection without requiring your
confirmation, provided you are not in a turning lane and the vehicle can detect that your hands are on the steering
wheelsteering yoke (or steering wheel).
NOTE: If, after you pull the Autopilot stalk toward you or press down on the drive stalk or press down on the drive stalk or
briefly press the accelerator pedal to confirm that you want to continue through the intersection, the traffic signal changes
before you enter the intersection (for example, the light changes from green to yellow or from yellow to red),
Model SModel XModel 3Model Y may determine that it is not appropriate to proceed. Therefore, Model SModel XModel
3Model Y stops and you must press the accelerator to proceed. At all times, it is your responsibility to ensure the vehicle stops
or accelerates appropriately and safely.
Owner's Manual
1275
Autopilot
WARNING: Traffic Light and Stop Sign Control DOES NOT turn Model SModel XModel 3Model Y through an
intersection unless Full Self-Driving (Supervised) is engaged. When in a turning lane, Model SModel XModel 3Model Y
stops at the red stop line. To proceed, pull the Autopilot stalk toward you or press down on the drive stalk or press down
on the drive stalk or briefly press the accelerator pedal—Model SModel XModel 3Model Y continues straight through
the intersection (even when in a turning lane), so you MUST manually steer Model SModel XModel 3Model Y through
the intersection (which cancels Autosteer).
Traffic Light and Stop Sign Control is designed to operate as described only when the following conditions are met:
• Autosteer, Full Self-Driving (Supervised), or Traffic-Aware Cruise Control is engaged.
• The cameras can detect an upcoming traffic light, stop sign or road marking (for example, cameras are unobstructed and
have a clear line-of-sight to the traffic light, stop sign, or road marking).
• The instrument clustertouchscreen on Model SModel XModel 3Model Y is displaying an upcoming traffic light in "bold"
format. Model SModel XModel 3Model Y does not acknowledge traffic lights that the instrument clustertouchscreen
shows as faded. If a traffic light is not directly ahead of the camera (for example, it is located at an angle of the camera's
view, or located in an adjacent lane) the instrument clustertouchscreen displays it as faded and Model SModel XModel
3Model Y does not slow down and stop for it.
WARNING: If the instrument clustertouchscreen is not displaying a red stop line at an upcoming intersection,
Model SModel XModel 3Model Y does not slow down or stop. It is the driver's responsibility to pay attention to
upcoming intersections and monitor traffic conditions to determine when and if the vehicle should stop and then to take
appropriate action as needed.
WARNING: Never depend on Traffic Light and Stop Sign Control to determine whether to stop at, or proceed through, an
intersection. Drive attentively by watching the road and paying attention to the roadway, upcoming intersections, traffic
conditions, crosswalks, and other road users. It is always the driver's responsibility to determine whether to stop or
proceed. Be prepared to take immediate action. Failure to do so can result in injury or death.
WARNING: In some situations, Traffic Light and Stop Sign Control may inaccurately detect a traffic light or stop sign,
causing Model SModel XModel 3Model Y to slow down unexpectedly. Be prepared to take immediate action at all times.
WARNING: You must pull the Autopilot stalk toward you or press down on the drive stalk or press down on the drive stalk
or briefly press the accelerator pedal to confirm that you want to proceed through an intersection, regardless of the
status of the traffic light. If you do not confirm, Model SModel XModel 3Model Y stops at the red stop line displayed on
the instrument clustertouchscreen, even if stopping may be inappropriate. Stopping at a green light may confuse other
drivers and may result in a collision, injury or death. Therefore, always pay attention to upcoming intersections and be
prepared to manually brake or accelerate in response to surroundings.
WARNING: Never assume that your ability to see a traffic light, stop sign, or road marking (especially at a complex
intersection, or an intersection in which a traffic light or sign is partially obstructed, etc.) means that
Model SModel XModel 3Model Y can also see it and respond appropriately.
WARNING: Even the most recent map data does not include all traffic lights and stop signs. Therefore, Traffic Light and
Stop Sign Control relies heavily on the ability of the cameras to detect traffic lights, stop signs, road markings, etc. As a
result, Model SModel XModel 3Model Y may ignore an intersection that is blocked from the camera's view (for example,
obstructed by a tree or a large vehicle or object, or located near a steep hill or sharp curve).
WARNING: Traffic Light and Stop Sign Control is not a substitute for attentive driving and sound judgment.
1276
Owner's Manual
Autopilot
Traffic Lights
When driving with Autosteer or Traffic-Aware Cruise Control engaged, and Traffic Light and Stop Sign Control enabled,
Model SModel XModel 3Model Y is designed to respond as follows when approaching intersections controlled by a traffic
light:
Type of Traffic Light
Vehicle Intended Response
At a solid green traffic light, or at a traffic light that is currently off (not illuminated),
Model SModel XModel 3Model Y slows down.
If you are following a car in front of you that continues through the intersection, the
instrument clustertouchscreen displays a green stop line and provided your hands are
detected on the steering wheelsteering yoke (or steering wheel), Model SModel XModel
3Model Y also continues. If a car is not in front of you, the instrument clustertouchscreen
displays a red stop line and you must confirm that you want to continue through the
intersection by pulling the Autopilot stalk toward you or press down on the drive stalk or
press down on the drive stalk or briefly pressing the accelerator pedal. If you don’t
confirm, Model SModel XModel 3Model Y stops at the red stop line.
NOTE: Model SModel XModel 3Model Y resumes the set cruising speed when it
continues through the intersection, taking into consideration the speed of a vehicle in
front of you.
Model SModel XModel 3Model Y slows down and comes to a complete stop at the red
stop line displayed on the instrument clustertouchscreen. When you want to continue
through the intersection (for example, the light turns green again, or once
Model SModel XModel 3Model Y has come to a complete stop), you must pull the
Autopilot stalk toward you or press down on the drive stalk or press down on the drive
stalk or briefly press the accelerator pedal.
Model SModel XModel 3Model Y slows down and comes to a complete stop at the red
stop line displayed on the instrument clustertouchscreen. When you want to proceed
through the intersection (for example, the light turns green again), you must pull the
Autopilot stalk toward you or press down on the drive stalk or press down on the drive
stalk or briefly press the accelerator pedal.
NOTE: If the traffic light changes after you've confirmed that you want to proceed (for
example, a green traffic light turns yellow), Model SModel XModel 3Model Y may stop
instead of continuing, especially if Model SModel XModel 3Model Y determines that it
can safely stop before entering the intersection.
NOTE: Model SModel XModel 3Model Y is not designed to proceed through an
intersection when the traffic light is red or if the light turns yellow in situations when there
is adequate distance to safely stop before entering the intersection.
NOTE: You can take over driving at any time by manually braking to cancel Autosteer or
Traffic-Aware Cruise Control.
Owner's Manual
1277
Autopilot
Type of Traffic Light
Vehicle Intended Response
Model SModel XModel 3Model Y slows down. To proceed, you must pull the Autopilot
stalk toward you or press down on the drive stalk or press down on the drive stalk or
briefly press the accelerator pedal. If you don’t, Model SModel XModel 3Model Y stops at
the red stop line displayed on the instrument clustertouchscreen.
NOTE: To prevent Model SModel XModel 3Model Y from stopping, and to minimize how
much it slows down as it approaches, you can confirm that you want to proceed by pulling
the Autopilot stalk toward you or press down on the drive stalk or press down on the drive
stalk or briefly pressing the accelerator pedal at any time after the instrument
clustertouchscreen displays the red stop line. Model SModel XModel 3Model Y resumes
your set cruising speed immediately after you confirm (taking into consideration the
speed of a vehicle in front of you).
WARNING: Approach attentively and be prepared to press the brake pedal to slow
down or stop.
Model SModel XModel 3Model Y slows down and comes to a complete stop at the red
stop line displayed on the instrument clustertouchscreen. When you want to proceed
through the intersection (for example, traffic laws and conditions indicate it is safe and
legal to proceed), you must pull the Autopilot stalk toward you or press down on the drive
stalk or press down on the drive stalk or briefly press the accelerator pedal.
1278
Owner's Manual
Autopilot
Stop Signs and Road Markings
When driving with Autosteer or Traffic-Aware Cruise Control engaged, and Traffic Light and Stop Sign Control enabled,
Model SModel XModel 3Model Y is designed to respond as follows when approaching intersections controlled by stop signs,
stop lines, or road markings:
Type of Intersection
Vehicle Intended Response
Model SModel XModel 3Model Y assumes the right of way and continues straight without
slowing down or stopping.
No Traffic Control
Arm of T-junction
If Model SModel XModel 3Model Y detects a T-junction based on the map data,
Model SModel XModel 3Model Y slows down and comes to a complete stop at the red stop
line displayed on the instrument clustertouchscreen. When you want to proceed, you must
take over steering and acceleration.
WARNING: Model SModel XModel 3Model Y may not stop at a T-junction that does not
have a stop sign or stop line, or if the T-junction is not included in the map data. Drive
attentively and be prepared to stop (when necessary and/or appropriate).
End of T-junction
Model SModel XModel 3Model Y slows down and comes to a complete stop at the red stop
line displayed on the instrument clustertouchscreen. When you want to proceed through the
intersection, you must pull the Autopilot stalk toward you or press down on the drive stalk or
press down on the drive stalk or briefly press the accelerator pedal.
NOTE: If you confirm that you want to proceed through an intersection controlled by a stop
sign by pulling the Autopilot stalk toward you or press down on the drive stalk or press down
on the drive stalk or briefly pressing the accelerator pedal before Model SModel XModel
3Model Y has stopped, your confirmation is ignored. Model SModel XModel 3Model Y is not
designed to proceed through a stop sign without stopping.
Stop Sign
Owner's Manual
NOTE: Even when using Autosteer, and even if you have engaged a turn signal, you must turn
the steering wheelsteering yoke (or steering wheel) yourself (which cancels Autosteer) to
complete a turn at an intersection.
1279
Autopilot
Type of Intersection
Vehicle Intended Response
Stop Sign and Road Marking
Road Marking
WARNING: Model SModel XModel 3Model Y also slows down and stops at a roundabout. You must take over steering
(which cancels Autosteer) and pull the Autopilot stalk toward you or press down on the drive stalk or press down on the
drive stalk or briefly press the accelerator pedal to confirm that you want to continue through the roundabout.
WARNING: At crosswalks, Model SModel XModel 3Model Y may slow down and may stop, depending on whether the
crosswalk is controlled by a traffic light and whether the cameras detect pedestrians, bicyclists, etc. in the crosswalk.
Pay particular attention at crosswalks and be prepared to take over at any time. Failure to do so can result in injury or
death.
Limitations
Depending on many different circumstances and environmental conditions, Traffic Light and Stop Sign Control may or may not
stop at:
• Railroad crossings.
• Keep-out zones.
• Toll booths.
• Crosswalk systems.
• Yield signs or temporary traffic lights and stop signs (such as at construction areas).
• Miscellaneous traffic U-turn lights, bicycle and pedestrian crossing lights, lane availability lights, etc.
In addition, Traffic Light and Stop Sign Control is particularly unlikely to operate as intended, can disengage, or may not
operate, when one or more of the following conditions are present:
• Driving through consecutive light-controlled intersections that are very close to each other.
• Visibility is poor (heavy rain, snow, fog, etc.) or weather conditions are interfering with camera or sensor operation.
• Bright light (such as direct sunlight) is interfering with the view of the camera(s).
1280
Owner's Manual
Autopilot
• A camera is obstructed, covered, damaged, or not properly calibrated.
• Driving on a hill or on a road that has sharp curves on which the cameras are unable to see upcoming traffic lights or stop
signs.
• A traffic light, stop sign, or road marking is obstructed (for example, a tree, a large vehicle, etc.).
• Model SModel XModel 3Model Y is being driven very close to a vehicle in front of it, which is blocking the view of a
camera.
WARNING: The limitations listed above are not an exhaustive list of reasons why Model SModel XModel 3Model Y may
not operate as expected. Many unforeseen circumstances can adversely impact the accurate operation of Traffic Light
and Stop Sign Control. Using this feature does not reduce or eliminate the need to drive attentively and responsibly. You
must be prepared to take appropriate and immediate action at all times.
Limitations and Warnings
This topic includes warnings, cautions, and limitations pertaining to the following Autopilot features.
• Traffic-Aware Cruise Control on page 547Traffic-Aware Cruise Control on page 567
• Autosteer on page 548Autosteer on page 578
• Navigate on Autopilot on page 625Navigate on Autopilot on page 584
• Autosteer on City Streets (Full Self-Driving (Supervised)) on page 626
• Autopark on page 627Autopark on page 601
• Summon on page 627Summon on page 616
• Smart Summon on page 628Smart Summon on page 620
WARNING: Read the following warnings and limitations carefully before using Autopilot. Failure to follow all warnings
and instructions can result in property damage, serious injury, or death.
NOTE: Ensure all cameras are clean and free of obstructions before each drive and before using Autopilot features (see
Cleaning a Camera on page 765Cleaning a Camera on page 766Cleaning a Camera on page 766Cleaning a Camera on page
766). Dirty cameras and sensors (if equipped), as well as environmental conditions such as rain and faded lane markings, can
affect Autopilot performance. If a camera is obstructed or blinded, Model SModel XModel 3Model Y displays a message on
the instrument clustertouchscreen and Autopilot features may not be available. For more information on specific alerts, see
Troubleshooting Alerts on page 936Troubleshooting Alerts on page 990.
Traffic-Aware Cruise Control
While using Traffic-Aware Cruise Control, it is the driver’s responsibility to stay alert, drive safely, and be in control of the vehicle
at all times. Always keep your eyes on the road when driving and be prepared to take corrective action as needed.
In addition, it is the driver’s responsibility to cruise at a safe speed and maintain a safe following distance based on road
conditions and applicable speed limits. Be aware of the following limitations while Traffic-Aware Cruise Control is active.
• There may be situations where the cruising speed may not change when the speed limit changes.
• Traffic-Aware Cruise Control does not adapt driving speed based on road and driving conditions. Do not use Traffic-Aware
Cruise Control on winding roads with sharp curves, on icy or slippery road surfaces, or when weather conditions (such as
heavy rain, snow, fog, etc.) make it inappropriate to drive at a consistent speed.
• Do not rely on Traffic-Aware Cruise Control to maintain an accurate or appropriate following distance.
• Traffic-Aware Cruise Control may be unable to provide adequate speed control because of limited braking capability and
hills. It can also misjudge the distance from a vehicle ahead. Driving downhill can increase driving speed, causing
Model SModel XModel 3Model Y to exceed your set speed (and potentially the road's speed limit).
• Traffic-Aware Cruise Control may occasionally cause Model SModel XModel 3Model Y to brake when not required or when
you are not expecting it. This can be caused by closely following a vehicle ahead, detecting vehicles or objects in adjacent
lanes (especially on curves), etc.
Owner's Manual
1281
Autopilot
• Due to limitations inherent in the onboard GPS (Global Positioning System), you may experience situations in which
Model SModel XModel 3Model Y slows down, especially near exits or off-ramps where a curve is detected and/or you are
navigating to a destination and not following the route.
• In some cases (such as having insufficient data), Traffic-Aware Cruise Control may not automatically reduce the set speed
on the highway interchange or off-ramp.
• Traffic-Aware Cruise Control may not detect all objects and, especially when cruising over 50 mph (80 km/h), may not
brake/decelerate when a vehicle or object is only partially in the driving lane or when a vehicle you are following moves out
of your driving path and a stationary or slow-moving vehicle or object is in front of you.
• Traffic-Aware Cruise Control may react to vehicles or objects that either do not exist, or are not in your lane of travel,
causing Model SModel XModel 3Model Y to slow down unnecessarily or inappropriately.
WARNING: Traffic-Aware Cruise Control is particularly unlikely to operate as intended in the following types of
situations:
• The road has sharp curves or significant changes in elevation.
• Road signs and signals are unclear, ambiguous, or poorly maintained.
• Visibility is poor (due to heavy rain, snow, hail, etc. or poorly lit roadways at night)
• You are driving in a tunnel or next to a highway divider that interferes with the view of the camera(s)
• Bright light (such as from oncoming headlights or direct sunlight) interferes with the view of the camera(s).
WARNING: The list above does not represent an exhaustive list of situations that may interfere with proper operation of
Traffic-Aware Cruise Control. Traffic-Aware Cruise Control can cancel unexpectedly at any time for unforeseen
reasons. Always watch the road in front of you and stay prepared to take appropriate action. It is the driver's
responsibility to be in control of Model SModel XModel 3Model Y at all times.
WARNING: Traffic-Aware Cruise Control is designed for your driving comfort and convenience and is not a collision
warning or avoidance system. Never depend on Traffic-Aware Cruise Control to adequately slow down
Model SModel XModel 3Model Y. Always watch the road in front of you and be prepared to take corrective action at all
times. Failure to do so can result in serious injury or death.
WARNING: Although Traffic-Aware Cruise Control is capable of detecting pedestrians and cyclists, never depend on
Traffic-Aware Cruise Control to adequately slow Model SModel XModel 3Model Y down for them. Failure to do so can
result in serious injury or death.
Autosteer
WARNING: Autosteer is a hands-on feature. Keep your hands on the steering wheel at all times, be mindful of road
conditions and surrounding traffic, and always be prepared to take immediate action. Failure to follow these instructions
could cause damage, serious injury or death.
WARNING: Autosteer is intended for use on controlled-access highways with a fully attentive driver. Do not use
Autosteer in construction zones, or in areas where bicyclists or pedestrians may be present.
WARNING: Never depend on Autosteer to determine an appropriate driving path.
1282
Owner's Manual
Autopilot
CAUTION: Autosteer and its associated functions are particularly unlikely to operate as intended when:
• Autosteer is unable to accurately determine lane markings. For example, lane markings are excessively worn, have
visible previous markings, have been adjusted due to road construction, are changing quickly (lanes branching off,
crossing over, or merging), objects or landscape features are casting strong shadows on the lane markings, or the
road surface contains pavement seams or other high-contrast lines.
• Visibility is poor (heavy rain, snow, fog, etc.) or weather conditions are interfering with sensor operation.
• A camera(s) or sensor(s) is obstructed, covered, or damaged.
• Driving on hills.
• Approaching a toll booth.
• Driving on a road that has sharp curves or is excessively rough.
• Bright light (such as direct sunlight) is interfering with the view of the camera(s).
• The sensors (if equipped) are affected by other electrical equipment or devices that generate ultrasonic waves.
• A vehicle is detected in your blind spot when you engage the turn signal.
• Model SModel XModel 3Model Y is being driven very close to a vehicle in front of it, which is blocking the view of
the camera(s).
WARNING: Many unforeseen circumstances can impair the operation of Autosteer. Always keep this in mind and
remember that as a result, Autosteer may not steer Model SModel XModel 3Model Y appropriately. Always drive
attentively and be prepared to take immediate action.
WARNING: Autosteer is not designed to, and will not, steer Model SModel XModel 3Model Y around objects partially in
a driving lane and in some cases, may not stop for objects that are completely blocking the driving lane. Always watch
the road in front of you and stay prepared to take immediate action. It is the driver's responsibility to be in control of
Model SModel XModel 3Model Y at all times.
Auto Lane Change
CAUTION: When changing lanes using Auto Lane Change, It is the driver's responsibility to determine whether a lane
change is safe and appropriate. Therefore, before initiating a lane change, always check blind spots, lane markings, and
the surrounding roadway to confirm it is safe and appropriate to move into the target lane.
CAUTION: Be aware of the following limitations while using Auto Lane Change.
• Never depend on Auto Lane Change to determine an appropriate driving path. Drive attentively by watching the road
and traffic ahead of you, checking the surrounding area, and monitoring the touchscreen for warnings. Always be
prepared to take immediate action.
• Do not use Auto Lane Change on roads where traffic conditions are constantly changing and where bicycles and
pedestrians are present.
• The performance of Auto Lane Change depends on the ability of the camera(s) to recognize lane markings.
• Do not use Auto Lane Change on winding roads with sharp curves, on icy or slippery roads, or when weather
conditions (such as heavy rain, snow, fog, etc.) may be obstructing the view from the camera(s) or sensors (if
equipped).
• Overtake Acceleration can cancel for many unforeseen reasons in addition to those listed above (for example, lack of
GPS data). Stay alert and never depend on Overtake Acceleration to increase your driving speed.
• Overtake Acceleration increases your driving speed whenever the appropriate turn signal is engaged, and
accelerates Model SModel XModel 3Model Y closer to the vehicle ahead. Although Traffic-Aware Cruise Control
continues to maintain distance from the vehicle ahead, it is important to be aware that your selected following
distance is reduced when Overtake Acceleration is active, particularly in cases where it may not be your intention to
overtake the vehicle you are following.
Stop Light and Stop Sign Warning
WARNING: Stop Light and Stop Sign Warning requires on-board maps to know that a particular stop light or stop sign
exists at a location. In some cases, map data is inaccurate or outdated and may not include all stop lights or stop signs.
Therefore, Stop Light and Stop Sign Warning may not detect all stop lights and stop signs.
Owner's Manual
1283
Autopilot
WARNING: The Stop Light and Stop Sign Warning feature does not apply the brakes or decelerate
Model SModel XModel 3Model Y and may not detect all stop lights and stop signs. Stop Light and Stop Sign Warning is
designed for guidance purposes only and is not a substitute for attentive driving and sound judgment. Keep your eyes
on the road when driving and never depend on Stop Light and Stop Sign Warning to warn you of a stop light or stop sign.
WARNING: Stop Light and Stop Sign Warning is designed to warn you only when approaching a visible red stop sign,
solid red or later portion of a yellow traffic light. It may not warn you of intersections with flashing lights and it does not
warn you of yield signs or temporary stop and yield signs (such as those used in construction areas). Additionally, Stop
Light and Stop Sign Warning does not warn you of approaching stop lights or stop signs when you are pressing the
accelerator pedal or brake pedal (which disables Autosteer).
Navigate on Autopilot
WARNING: Never depend on Navigate on Autopilot to determine an appropriate lane at an off-ramp. Stay alert and
perform visual checks to ensure that the driving lane is safe and appropriate.
WARNING: If you turn off Require Lane Change Confirmation, Navigate on Autopilot notifies you of upcoming lane
changes and off-ramps, but it remains your responsibility to monitor the environment and maintain control of
Model SModel XModel 3Model Y at all times. Lane changes can occur quickly and suddenly. Always keep your hands on
the wheel and your eyes on the driving path in front of you.
WARNING: Navigate on Autopilot does not make driving autonomous. You must pay attention to the road, keep your
hands on the steering wheel at all times, and remain aware of your navigation route.
WARNING: As is the case with normal driving, be extra careful around blind corners, interchanges, and on-ramps and
off-ramps - obstacles can appear quickly and at any time.
WARNING: Navigate on Autopilot may not recognize or detect oncoming vehicles, stationary objects, and special-use
lanes such as those used exclusively for bikes, carpools, emergency vehicles, etc. Remain alert at all times and be
prepared to take immediate action. Failure to do so can cause damage, injury or death.
Autosteer on City Streets (Full Self-Driving (Supervised))
WARNING: Always remember that Full Self-Driving (Supervised) (also known as Autosteer on City Streets) does not
make Model SModel XModel 3Model Y autonomous and requires a fully attentive driver who is ready to take immediate
action at all times.
WARNING: Full Self-Driving (Supervised) is a hands-on feature. Keep your hands on the steering wheelsteering yoke (or
steering wheel) at all times, be mindful of road conditions and surrounding traffic, and always be prepared to take
immediate action. Failure to follow these instructions could cause damage, serious injury or death. It is your
responsibility to familiarize yourself with the limitations of Full Self-Driving (Supervised) and the situations in which it
may not work as expected.
WARNING: Failure to follow all warnings and instructions can result in property damage, serious injury or death.
CAUTION: Full Self-Driving (Supervised) and its associated functions may not operate as intended and there are
numerous situations in which driver intervention may be needed. Examples include (but are not limited to):
• Interactions with pedestrians, bicyclists, and other road users.
• Unprotected turns with high-speed cross traffic.
• Multi-lane turns.
• Simultaneous lane changes.
• Narrow roads with oncoming cars or double-parked vehicles.
• Rare objects such as trailers, ramps, cargo, open doors, etc. protruding from vehicles.
• Merges onto high-traffic, high-speed roads.
• Debris in the road.
• Construction zones.
• High curvature roads, particularly at fast driving speeds.
Visibility is critical for Full Self-Driving (Supervised) to operate. Low visibility, such as low light or poor weather
conditions (rain, snow, direct sun, fog, etc.) can significantly degrade performance.
1284
Owner's Manual
Autopilot
WARNING: Model SModel XModel 3Model Y may quickly and suddenly make unexpected maneuvers or mistakes that
require immediate driver intervention.
The list above represents only a fraction of the possible scenarios that can cause Full Self-Driving (Supervised) to make
sudden maneuvers and behave unexpectedly. In fact, Model SModel XModel 3Model Y can suddenly swerve even when
driving conditions appear normal and straight-forward. Stay alert and always pay attention to the roadway so you can
anticipate the need to take corrective action as early as possible. Remember that this is an early access feature that
must be used with extra caution.
CAUTION: As Full Self-Driving (Supervised) deployment expands, Tesla
will gradually make it available to eligible
customers in select countries outside the United States. Because every country contains unique infrastructure, driving
behaviors, and traffic patterns that Full Self-Driving (Supervised) must adapt to over time, it is essential for drivers using
Full Self-Driving (Supervised) in newly eligible countries to be extra attentive and overly cautious. You must be ready to
take over safely at any time.
Autopark
CAUTION: Autopark's performance depends on the ability of the cameras and sensors (if equipped) to determine the
vehicle's proximity to curbs, objects, and other vehicles. Be aware of the following warnings before and while using
Autopark:
• Do not use Autopark if anything, such as a ball hitch, bike rack, or trailer, is attached to the tow hitch. Autopark may
not stop for hitches when parking between or in front of other vehicles.
• Never depend on Autopark to find a parking space that is legal, suitable, and safe. Autopark may not always detect
objects in the parking space. Always perform visual checks to confirm that a parking space is appropriate and safe.
• When Autopark is actively steering Model SModel XModel 3Model Y, the steering wheel moves in accordance with
Autopark's adjustments. Do not interfere with the movement of the steering wheel. Doing so cancels Autopark.
• During the parking sequence, continually check your surroundings. Be prepared to apply the brakes to avoid
vehicles, pedestrians, or objects.
• When Autopark is active, monitor the touchscreen to ensure that you are aware of the instructions that Autopark is
providing.
CAUTION:
Autopark is particularly unlikely to operate as intended in these situations:
• The road is sloped. Autopark is designed to operate on flat roads only.
• Visibility is poor (due to heavy rain, snow, fog, etc.).
• The curb is constructed of material other than stone, or the curb cannot be detected.
• The target parking space is directly adjacent to a wall or pillar (for example, the last parking space of a row in an
underground parking structure).
• One or more of the sensors (if equipped) or cameras is damaged, dirty, or obstructed (such as by mud, ice, or snow,
or by a vehicle bra, excessive paint, or adhesive products such as wraps, stickers, rubber coating, etc.).
• Weather conditions (heavy rain, snow, fog, or extremely hot or cold temperatures) are interfering with sensor (if
equipped) operation.
• The sensors (if equipped) are affected by other electrical equipment or electrical interference.
WARNING: Many unforeseen circumstances can impair Autopark's ability to park Model SModel XModel 3Model Y.
Keep this in mind and remember that as a result, Autopark may not steer Model SModel XModel 3Model Y
appropriately. Pay attention when parking Model SModel XModel 3Model Y and stay prepared to immediately take
control.
Owner's Manual
1285
Autopilot
Summon
CAUTION: Summon's performance depends on the ability of the cameras and sensors (if equipped) to determine the
vehicle's proximity to objects, people, animals, and other vehicles. Summon is unlikely to operate as intended in the
following types of situations:
• The driving path is sloped. Summon is designed to operate on flat roads only (up to 10% grade).
• A raised concrete edge is detected. Summon does not move Model SModel XModel 3Model Y over an edge that is
higher than approximately 1 in (2.5 cm).
• One or more of the sensors (if equipped) or cameras is damaged, dirty, or obstructed (such as by mud, ice, or snow,
or by a vehicle bra, excessive paint, or adhesive products such as wraps, stickers, rubber coating, etc.).
• Weather conditions (heavy rain, snow, fog, or extremely hot or cold temperatures) are interfering with sensor
operation.
• The sensors (if equipped) are affected by other electrical equipment or devices that generate ultrasonic waves.
• Model SModel XModel 3Model Y is in Trailer Mode or an accessory is attached.
WARNING: The list above does not represent an exhaustive list of situations that may interfere with proper operation of
Summon. It is the driver's responsibility to remain in control of Model SModel XModel 3Model Y at all times. Pay close
attention whenever Summon is actively moving Model SModel XModel 3Model Y and stay prepared to take immediate
action. Failure to do so can result in serious property damage, injury or death.
WARNING: Model SModel XModel 3Model Y cannot detect obstacles that are located lower than the bumper, are very
narrow, or are hanging from a ceiling (for example, bicycles). In addition, many unforeseen circumstances can impair
Summon's ability to move in or out of a parking space and, as a result, Summon may not move Model SModel XModel
3Model Y appropriately. Therefore, you must continually monitor the vehicle's movement and its surroundings and
remain prepared to stop Model SModel XModel 3Model Y at any time.
Smart Summon
CAUTION: Smart Summon is a BETA feature. You must continually monitor the vehicle and its surroundings and stay
prepared to take immediate action at any time. It is the driver's responsibility to use Smart Summon safely, responsibly,
and as intended.
CAUTION: Smart Summon is designed and intended for use only on parking lots and driveways located on private
property where the surrounding area is familiar and predictable. Do not use Smart Summon on public roads.
NOTE: Smart Summon is disabled if Model SModel XModel 3Model Y is in Valet mode (see Valet Mode on page 510).
CAUTION:
Smart Summon is unlikely to operate as intended in the following types of situations:
• GPS data is unavailable due to poor cellular coverage.
• The driving path is sloped. Smart Summon is designed to operate on flat roads only (up to 10% grade).
• A raised concrete edge is detected. Depending on the height of the concrete edge, Smart Summon may not move
Model SModel XModel 3Model Y over it.
• One or more of the sensors (if equipped) or cameras is damaged, dirty, or obstructed (such as by mud, ice, or snow,
or by a vehicle bra, excessive paint, or adhesive products such as wraps, stickers, rubber coating, etc.).
• Weather conditions (heavy rain, snow, fog, or extremely hot or cold temperatures) are interfering with sensor (if
equipped) or camera operation.
• The sensors (if equipped) are affected by other electrical equipment or devices that generate ultrasonic waves.
• Model SModel XModel 3Model Y is in Trailer Mode or an accessory is attached
WARNING: The list above does not represent an exhaustive list of situations that may interfere with proper operation of
Smart Summon. It is the driver's responsibility to remain in control of Model SModel XModel 3Model Y at all times. Pay
close attention whenever Smart Summon is actively moving Model SModel XModel 3Model Y and stay prepared to take
immediate action. Failure to do so can result in serious property damage, injury or death.
WARNING: Smart Summon must only be used on paved surfaces.
1286
Owner's Manual
Autopilot
WARNING: Smart Summon may not stop for all objects (especially very low objects such as some curbs, or very high
objects such as a shelf) and may not react to all traffic. Smart Summon does not recognize the direction of traffic, does
not navigate around empty parking spaces, and may not anticipate crossing traffic.
WARNING: When using Smart Summon, you must maintain a clear line of sight between you and Model SModel XModel
3Model Y and stay prepared to stop the vehicle at any time by releasing the button on the mobile app.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: fsd_12-5-1-2_082024.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: fsd-12-5-1-2
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




