Loading...

NHTSA ID Number: 11005739

Manufacturer Communication Number: 2024.26.3_SX_0724.pdf

TSB/Document Date: 2024-08-06


Summary

TeslaeBay logo does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.


Owner's Manual

Owners Manual

Incorrect seating position - the passenger's feet must be on the floor:

Incorrect seating position - the passenger must not slide forward on the seat cushion:

Owner's Manual

169

Owners Manual

Incorrect seating position - the passenger must not recline the backrest to a laying down position when the vehicle is moving:

170

Owner's Manual

Owners Manual
Inflation Effects
WARNING: When airbags inflate, a fine powder is released. This powder can irritate the skin and should be thoroughly
flushed from the eyes and from any cuts or abrasions.
After inflation, the airbags deflate to provide a gradual cushioning effect for the occupants and to ensure the driver’s forward
vision is not obscured.
If airbags have inflated, or if your vehicle has been in a collision, always have the airbags, seat belt pre-tensioners and any
associated components checked and, if necessary, replaced by TeslaeBay logo.
In a collision, in addition to the airbags inflating:
• Doors and liftgate unlock.
Hazard warning lights turn on.
• Interior lights turn on.
• High voltage is disabled.
To restore high voltage power, use the touchscreen to manually power off Model SModel X (see Powering Off on page 196),
then press the brake to power it back on again.
Airbag Warning Indicator
The airbag indicator on the touchscreen remains lit if the airbag system is malfunctioning. The only time this
indicator should light up is briefly when Model SModel X first powers up, in which case it turns off within a few
seconds. If it remains lit, contact TeslaeBay logo immediately and do not drive.

Airbag Warnings
WARNING: All occupants, including the driver, should always wear their seat belts, whether or not an airbag is also
provided at their seating position, to minimize the risk of severe injury or death in the event of a collision.
WARNING: Front seat occupants should not place their arms over the airbag module, as an inflating airbag can cause
fractures or other injuries.
WARNING: Do not use seat covers on Model SModel X. Doing so could restrict deployment of the seat-mounted side air
bags if a collision occurs. It can also reduce the accuracy of the occupant detection system, if equipped.
WARNING: Airbags inflate with considerable speed and force, which can cause injury. To limit injuries, ensure that
occupants are wearing seat belts and are correctly seated, with the seat positioned as far back as possible. The National
Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of 10" (25 cm) between an occupant’s
chest and an airbag.
WARNING: Children should not be seated on the front passenger seat. Follow all regulations in your region for the
appropriate way to seat a child based on the child's weight, size, and age. The safest place to seat infants and young
children is in a rear seating position. Seating an infant or child on a seat equipped with an operational front airbag can
cause serious injury or death.
WARNING: Do not use a rear-facing child safety seat on a seat with an operational airbag in front of it. Doing so can
cause injury or death if the airbag inflates.
WARNING: To ensure correct inflation of the side airbags, maintain an unobstructed gap between an occupant’s torso
and the side of Model SModel X.
WARNING: Passengers shouldn't lean their heads against doors. Doing so can cause injury if a curtain airbag inflates.
WARNING: Do not allow passengers to obstruct the operation of an airbag by placing feet, knees or any other part of the
body on or near an airbag.
WARNING: Do not attach or place objects on or near the front airbags, the side of the front seats, the headliner at the
side of the vehicle, or any other airbag cover that could interfere with inflation of an airbag. Objects can cause serious
injury if the vehicle is in a collision severe enough to cause the airbag to inflate.
WARNING: Following inflation, some airbag components are hot. Do not touch until they have cooled.

Owner's Manual

171

Owners Manual
Airbags
Location of Airbags
Airbags are located in the approximate areas shown below. Airbag warning information is printed on the sun visors.
Model SModel X is equipped with an airbag and lap/shoulder belt at both front seating positions. The airbag is a supplemental
restraint at those seating positions. All occupants, including the driver, should always wear their seat belts whether or not an
airbag is also provided at their seating position to minimize the risk of severe injury or death in the event of a crash.

172

Owner's Manual

Owners Manual

Owner's Manual

173

Owners Manual

1. Passenger knee airbag.
2. Passenger front airbag.
3. Side airbags.
4. Curtain airbags.
5. Driver’s knee airbag.
6. Driver’s front airbag.

174

Owner's Manual

Owners Manual
How Airbags Work
Airbags inflate when sensors detect an impact that exceeds deployment thresholds. These thresholds are designed to predict
the severity of a crash in time for the airbags to help protect the vehicle's occupants. Airbags inflate instantly with
considerable force accompanied by a loud noise. The inflated bag, together with the seat belts, limits movement of occupants
to reduce the risk of injury.
Front airbags are not ordinarily designed to inflate in rear collisions, rollovers, side collisions and when braking heavily or
driving over bumps and potholes. Likewise, front airbags may not inflate in all frontal collisions, such as minor front collisions,
underride collisions, or minor impacts with narrow objects (such as posts or poles). Significant superficial damage can occur
to the vehicle without the airbags inflating and, conversely, a relatively small amount of structural damage can cause airbags to
inflate. Therefore, the external appearance of the vehicle after a collision does not represent whether or not the front airbags
should have inflated.
WARNING: Before modifying your vehicle to accommodate a person with disabilities in a way that may affect the airbag
system, contact TeslaeBay logo.
Types of Airbags
Model SModel X has the following types of airbags:
• Front airbags: The front airbags are designed to reduce injuries if larger children or adults are riding in the front seats.
Follow all warnings and instructions related to seating a child on the front passenger seat (if permitted in your market
region).
• Knee airbags: Knee airbags and the front airbags work together. The knee airbags limit the forward motion of the front seat
occupants by restricting leg movement, thereby positioning the occupants so that the front airbags work more effectively.
• Side airbags: Side airbags protect the thorax region of the torso and the pelvis. They inflate only if a severe side impact
occurs. Side airbags on the non-impacted side of the vehicle do not inflate.
• Curtain airbags: Curtain airbags help protect the head. Curtain airbags on both the impacted and non-impacted side of the
vehicle inflate only if a severe side impact occurs, or if the vehicle rolls over.
Passenger Front Airbag Status
The status of the passenger front airbag displays in the top corner of the touchscreenon the touchscreen:
The Passenger Airbag Off indicator displays in the top corner of the touchscreen only when the
passenger front airbag is OFF. When the passenger front airbag is OFF, it does not inflate when a
collision occurs. This indicator does not display when the airbag is ON or when the seat is unoccupied.
The Passenger Airbag Off indicator displays in the top corner of the touchscreen on the touchscreen when
the passenger front airbag is OFF. When the passenger front airbag is OFF, it does not inflate when a
collision occurs. This indicator does not display when the seat is unoccupied.
To protect an adult occupying the front passenger seat, ensure the passenger front airbag is ON. When the
passenger airbag is ON, it may inflate when a collision occurs.

Owner's Manual

175

Owners Manual
Controlling the Passenger Front Airbag
Model SModel X has an occupancy sensor in the front passenger seat that controls the status of the front airbag.
NOTE: The occupancy classification system (OCS) meets the regulatory requirement of FMVSS 208 and automatically detects
when inflating the passenger front airbag would be unnecessary or potentially harmful.
WARNING: Seating an infant in a rear facing child safety seat on a seat equipped with an operational airbag can cause
serious injury or death.
Object Classification

OCS Passenger Airbag Indicator status
Status*

Notes

Empty

OFF

PASSENGER AIRBAG OFF

Object

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

Depends on material/contents.

Rear facing child seateBay logo designed
for children up to a year old

OFF

PASSENGER AIRBAG OFF

20 lbs (9 kg) or less

Forward facing child seateBay logo

OFF

PASSENGER AIRBAG OFF

35 lbs (16 kg) or less

Child in a booster seat

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

20-100 lbs (9-45 kg)*

Large child

OFF or ON

PASSENGER AIRBAG OFF or
PASSENGER AIRBAG ON

5th percentile female or larger
(by weight)

ON

PASSENGER AIRBAG ON

Over approximately 100 lbs (45
kg)

*If the passenger airbag status indicator does not match the situation, do not use the seat. The passenger must ride in a
different seat. Contact TeslaeBay logo Service.
NOTE: It takes approximately six seconds after you power on Model SModel X for the occupant classification system (OCS) to
report accurate status of the front passenger airbag. As a result, when you first power on Model SModel X, even in situations
when it should be OFF because the seat is occupied by a weight of 20 lbs (9 kg) or less, a delay of approximately six seconds
can occur before the touchscreen displays the PASS AIRBAG OFF status. If it fails to do so, contact Tesla Service and do not
seat a child in the front passenger seating position.
To make sure the sensing system can correctly detect occupancy status, eliminate the following:
• Objects lodged under the seat.
• Heavy objects sitting on the seat (briefcase, large purse).
• Objects wedged between the seat back and seat cushion.
• Cargo interfering with the seat.
• Aftermarket items attached to, or sitting on or between, the seat and occupant including but not limited to covers, mats,
blankets, etc.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, ask passengers to ride in the rear seats and contact Tesla to have the airbag system checked.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front airbags only. The side airbags are
not affected.
WARNING: If the front passenger airbag is not turning on or off as expected based on the weight thresholds previously
described, contact Tesla immediately.
WARNING: Never seat a child in the front passenger seat. DEATH or SERIOUS INJURY to the child can occur. Per
recommendations by the National Highway Traffic Safety Administration, all occupants age 12 and under must ride in the
rear seats.

176

Owner's Manual

Owners Manual
WARNING: Do not use seat covers on Model SModel X. Doing so could restrict deployment of the seat-mounted side air
bags if a collision occurs. It can also reduce the accuracy of the occupant detection system and the noise-canceling
microphones, if equipped.
Ensuring Accurate Occupant Classification
To help ensure an occupant in the front passenger seat can be accurately classified, the passenger must:
• Wear a seat belt.
• Sit upright on the center of the seat cushion, with shoulders resting against the seat back and legs extended comfortably in
front with feet on the floor. See Examples of Correct and Incorrect Seating Positions on page 177Examples of Correct and
Incorrect Seating Positions on page 179.
• Remain positioned on the seat cushion and not lift their weight off the seat (for example, by pushing their feet against the
floor or pressing on the center console or armrest to lift up).
• Never wear thick, wet, or bulky clothing (such as ski wear or padded clothing).
In addition to the items listed above, the following situations can interfere with the accuracy of the occupant classification
system:
• Placing a radio transmitter (for example, a hunting radio or walkie-talkie) on the front passenger seat.
• Placing an AC/DC inverter, or a device that is being powered by the inverter (for example, a cell phone, tablet, or computer)
on the front passenger seat cushion.
• Placing liquid (such as a bottled drink) or food containers on a car seateBay logo when a child seateBay logo is present.
• Objects lodged under the seat or wedged between the seat back and cushion.
• Heavy objects sitting on the seat (briefcase, large purse).
• Cargo interfering with the seat.
• Aftermarket items attached to or placed between the seat and the occupant, such as covers, mats, blankets, etc.
These conditions can interfere with the occupancy sensor. If you have eliminated the above possibilities, and the airbag status
is still incorrect, instruct passengers to ride in the rear seats and contact Tesla to have the airbag system checked.
NOTE: The front passenger occupancy sensor affects the operation of the passenger front airbags only. The side airbags are
not affected.
WARNING: Tesla follows NHTSA (National Highway Traffic Safety Administration) recommendations that all occupants
age 12 and under must ride in a rear seating position.
WARNING: Failure to follow the above instructions can adversely affect the Occupant Classification System (OCS)
which can cause serious injury or death.
WARNING: If the front passenger airbag is not turning on or off as expected, do not seat a passenger in the front
passenger seat. Contact Tesla Service.
WARNING: To ensure accuracy of the occupant detection system, do not make any modifications to the front passenger
seat.
WARNING: Do not use seat covers on Model SModel X. Doing so could restrict deployment of the seat-mounted side air
bags if a collision occurs. It can also reduce the accuracy of the occupant classification system.
Examples of Correct and Incorrect Seating Positions
Correct seating position:

Owner's Manual

177

Owners Manual

Incorrect seating position - the passenger's feet must be on the floor:

Incorrect seating position - the passenger must not slide forward on the seat cushion:

178

Owner's Manual

Owners Manual

Incorrect seating position - the passenger must not recline the backrest to a laying down position when the vehicle is moving:

Examples of Correct and Incorrect Seating Positions
Correct seating position:

Owner's Manual

179

Owners Manual

Incorrect seating position - the passenger's feet must be on the floor:

Incorrect seating position - the passenger must not slide forward on the seat cushion:

Incorrect seating position - the passenger must not recline the backrest to a laying down position when the vehicle is moving:

180

Owner's Manual

Owners Manual

Inflation Effects
WARNING: When airbags inflate, a fine powder is released. This powder can irritate the skin and should be thoroughly
flushed from the eyes and from any cuts or abrasions.
After inflation, the airbags deflate to provide a gradual cushioning effect for the occupants and to ensure the driver’s forward
vision is not obscured.
If airbags have inflated, or if your vehicle has been in a collision, always have the airbags, seat belt pre-tensioners and any
associated components checked and, if necessary, replaced by Tesla.
In a collision, in addition to the airbags inflating:
• Doors unlock, and the door handles extend.
Hazard warning lights turn on.
• Interior lights turn on.
• High voltage is disabled (you must contact Tesla Service to restore high voltage power).
Airbag Warning Indicator
The airbag indicator on the instrument cluster remains lit if the airbag system is malfunctioning. The only time
this indicator should light up is briefly when Model SModel X first powers up, in which case it turns off within a
few seconds. If it remains lit, contact Tesla immediately and do not drive.

Airbag Warnings
WARNING: Do not place objects over or near airbags because any such objects could cause harm if the vehicle is in a
crash severe enough to cause the airbag to inflate.
WARNING: All occupants, including the driver, should always wear their seat belts, whether or not an airbag is also
provided at their seating position, to minimize the risk of severe injury or death in the event of a collision.
WARNING: Front seat occupants should not place their arms over the airbag module, as an inflating airbag can cause
fractures or other injuries.
WARNING: Do not use seat covers on Model SModel X. Doing so could restrict deployment of the seat-mounted side air
bags if a collision occurs. It can also reduce the accuracy of the occupant detection system and the noise-canceling
microphones, if equipped.
WARNING: Airbags inflate with considerable speed and force, which can cause injury. To limit injuries, ensure that
occupants are wearing seat belts and are correctly seated, with the seat positioned as far back as possible. The National
Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of 10" (25 cm) between an occupant’s
chest and an airbag.
Owner's Manual

181

Owners Manual
WARNING: Children should not be seated on the front passenger seat. Follow all regulations in your region for the
appropriate way to seat a child based on the child's weight, size, and age. The safest place to seat infants and young
children is in a rear seating position. Seating an infant or child on a seat equipped with an operational front airbag can
cause serious injury or death.
WARNING: To ensure correct inflation of the side airbags, maintain an unobstructed gap between an occupant’s torso
and the side of Model SModel X.
WARNING: Passengers shouldn't lean their heads against doors. Doing so can cause injury if a curtain airbag inflates.
WARNING: Do not allow passengers to obstruct the operation of an airbag by placing feet, knees or any other part of the
body on or near an airbag.
WARNING: Do not attach or place objects on or near the front airbags, the side of the front seats, the headliner at the
side of the vehicle, or any other airbag cover that could interfere with inflation of an airbag. Objects can cause serious
injury if the vehicle is in a collision severe enough to cause the airbag to inflate.
WARNING: Following inflation, some airbag components are hot. Do not touch until they have cooled.

Driving
Driver Profiles
Creating a Driver Profile
When you first adjust the driver’s seat, steering wheelsteering yoke position, or exterior side mirrors, the touchscreen prompts
you to create a driver profile to save these adjustments. Your profile also saves various preferences you make while
customizing Model SModel X.
To add a new driver profile, touch the driver profile icon at the top of the touchscreenControls screen.
Then touch Driver Profile Settings > Add New Driver, type the driver's name and touch Create Profile.
Follow the onscreen instructions to save mirror and steering wheel position to the driver profile. Check
the Use Easy Entry checkbox if you want to save (or use existing) Easy Entry settings in which the
driver's seat and the steering wheelsteering yoke are automatically adjusted to make it easy to enter
and exit Model SModel X.

If you change the position of the driver’s seat, steering wheelsteering yoke, or exterior side mirrors after you have saved or
chosen a driver profile, the touchscreen prompts you to Save the new position or Restore the previously saved position (other
settings are automatically saved). To change a setting without saving or restoring, just ignore the prompt.
NOTE: Valet mode is a built-in driver profile that limits speed and restricts access to some Model SModel X features (see Valet
Mode on page 183).
NOTE: Depending on date of manufacture and options selected at time of purchase, some Model S vehicles are not equipped
with the driver profile feature. Also, in cases where the vehicle is equipped with driver profiles, some features may not be
automatically saved and adjusted based on the driver profile (for example, mirror position).
NOTE: To stop automatic adjustments that are in process based on a driver's profile, touch Stop on the Driver Profile
dropdown menu. Automatic adjustments also stop if you manually adjust a seat, mirror, or the steering wheelsteering yoke.
Easy Entry

You can define an Easy Entry setting that moves the steering wheelsteering yoke and driver's seat to make it easy to enter and
exit Model SModel X. Any driver can use the Easy Entry setting by associating it with their driver's profile. When the Easy
Entry setting is associated with a driver's profile, the steering wheelsteering yoke and driver's seat automatically adjust when
in Park and the driver's seat belt is unbuckled, allowing an easy exit from Model SModel X. When returning to the vehicle and
stepping on the brake pedal, settings automatically adjust back to the settings used by the most recent driver profile (or based
on the key if it's linked to a driver profile).
To use Easy Entry with a driver profile, ensure the Use Easy Entry box is checked.

182

Owner's Manual

Owners Manual
WARNING: Never use Easy Entry to move the driver's seat to the full rearward position when a child safety seat is
installed on a rear seat located behind the driver's seat. With reduced clearance, the movement of the seat may impact a
child's legs, cause injury, or dislodge the seat.
Selecting Between Driver Profiles
To adjust Model SModel X based on a driver’s profile, touch the driver profile icon at the top of the
touchscreenControls screen. Then choose the driver, and Model SModel X is adjusted based on
the settings that have been saved to the chosen driver profile.

Saved Settings
A subset of the settings that you choose to customize your Model SModel X are automatically saved to your driver's profile.
Once saved, a green check mark appears next to the driver profile icon on the touchscreen. Examples of automatically saved
driver profile settings are:
Navigation, temperature, lights and display settings.
• Autopilot and driving preferences.
NOTE: The settings that are associated with driver profiles vary depending on the vehicle's date of manufacture and version of
software installed.
Linking a Driver Profile to a Key Fob
You can link a driver profile to a specific key fob to allow Model SModel X to automatically select the correct driver profile
when the linked key fob is detected as you approach the vehicle and open the driver's door. To link a driver profile to a key fob,
enter Model SModel X with the key fob and touch the driver profile icon at the top of the touchscreen. Select the driver profile
you would like to link to the key fob, then touch Link to Key Fob.
NOTE: Model SModel X detects only one key fob at a time. The driver profile is linked to the key fob that is detected by the
vehicle at that time. Therefore, if you want to link driver profiles to multiple key fobs, ensure that only the key fob that you
would like to link the driver profile to is within detection range while performing the linking procedure. Move all other key fobs
outside of the detection range (at least three feet (one meter) away from Model SModel X).
NOTE: Model SModel X can support up to threeeight linked key fobs. However, a driver profile can only be linked to one key
fob.
To remove the link between a driver profile and key fob, touch the driver profile icon at the top of the touchscreen. Select the
driver profile, then touch the X next to Linked to Key Fob.
Linking a Driver Profile to a Key
You can link a driver profile to a key (or keys) to allow Model SModel X to automatically select the correct driver profile when
the linked key is detected as you approach the vehicle and open the driver's door. To link a driver profile to a key, first ensure
you are using your desired driver profile. Touch the driver profile icon at the top of the Controls screen. Follow the onscreen
instructions to add a phone key, key card, or key fob (see Adding and Removing Keys on page 29). When finished, touch the
driver icon to link the key to the desired driver profile. The name of the driver profile appears under the key to show that it is
linked.
NOTE: Model SModel X supports up to 10 driver profiles. You can link multiple keys to a driver profile, but you cannot link
multiple driver profiles to a single key.
Valet Mode
When Model SModel X is in Valet mode, the following restrictions apply:
• Speed is limited to 70 mph (113 km/h).
• Maximum acceleration and power are limited.
• Front trunk and glovebox are locked.
• Home and Work locations are not available in the navigation system.
Owner's Manual

183

Owners Manual
• Voice commands are disabled.
• Cruise control is disabled.
• Autopilot convenience features are disabled.
• The Allow Mobile Access setting cannot be changed
HomeLink (if applicable in your market region) is not accessible.
• Driver Profiles are not accessible.
Wi-Fi and Bluetooth are disabled. When Model SModel X is in Valet mode, you cannot pair new Bluetooth devices or view
or delete existing paired devices. However, if a Bluetooth-paired device or a known Wi-Fi network is within range,
Model SModel X connects to it.
NOTE: Model SModel X does not automatically shift when in Valet Mode.
Starting Valet Mode

With Model SModel X in Park, touch the driver profile icon at the top of the touchscreenControls screen, then touch Valet
Mode.
The first time you enter Valet mode, the touchscreen prompts you to create a 4-digit PIN you will use to cancel Valet mode.
When Valet mode is active, the instrument panel displays the word Valet and the Valet mode driver profile displays on the
touchscreen.
You can also use the mobile app to start and cancel Valet mode (provided Model SModel X is in Park). When using the mobile
app, you do not need to enter a PIN because you are already required to log into the app using your Tesla Account credentials.
NOTE: If the PIN to Drive setting is enabled (see PIN to Drive on page 394), you must enter the driving PIN before you can
define or enter a Valet PIN. Once in Valet mode, Model SModel X can be driven without the valet needing to enter the driving
PIN.
NOTE: The PIN to Drive setting is not available when Valet mode is active.
If you forget your valet PIN, reset it from inside Model SModel X by entering your Tesla Account credentials (which also
cancels Valet mode). You can also reset your PIN using the mobile app.
WARNING: Do not use Valet mode when towing a trailer. The torque limitations of Valet mode can make it difficult for
Model SModel X to pull a trailer up a hill.
Canceling Valet Mode

With Model SModel X in Park, touch the Valet Mode driver profile icon at the top of the touchscreenControls screen, and enter
your 4-digit PIN.
When you cancel Valet mode, all settings associated with the most recently used driver profile and climate control settings are
restored, and all features are available.
NOTE: You do not need to enter a PIN to cancel Valet mode from the mobile app.

184

Owner's Manual

Owners Manual
Steering WheelSteering Yoke
Adjusting Steering WheelSteering Yoke Position
To adjust the steering wheelsteering yoke, touch Controls and touch the Steering icon.
Use the left scroll button on the steering wheelsteering yoke to move the steering wheelsteering yoke to the desired position:
• To adjust the height/tilt angle of the steering wheelsteering yoke, roll the left scroll button up or down.
• To move the steering wheelsteering yoke closer to you, or further away from you, press the left scroll button to the left or
right.

WARNING: Do not make steering wheelsteering yoke adjustments while driving.
Adjusting Steering Wheel Position
Adjust the steering wheel to the desired driving position by moving the control on the left side of the steering column. Using
this control, you can move the steering wheel forward and backward and up and down.

Owner's Manual

185

Owners Manual

WARNING: Do not make adjustments while driving.
Adjusting Steering Effort
You can adjust the feel and sensitivity of the steering system to suit your personal preference:
1. On the touchscreen, touch Controls > Pedals & Steering > Steering Mode.
2. Choose a steering option:
◦ Comfort - Reduces the effort required to turn the steering wheelsteering yoke. In town, Model SModel X feels easier to
drive and park.
◦ Standard - Tesla believes that this setting offers the best handling and response in most conditions.
◦ Sport - Increases the effort required to turn the steering wheelsteering yoke. When driving at higher speeds,
Model SModel X feels more responsive.
Overview of Steering Yoke Buttons
Your Model SModel X features stalkless driving in which all controls you need when driving are accessible on the steering
yoke.

1. Right turn signal (see #unique_45 on page ).
2. High beam headlights* (see #unique_44 on page ).
186

Owner's Manual

Owners Manual
3. Left turn signal (see #unique_45 on page ).
4. Left scroll button (see Left Scroll Button on page 187).
5. Horn (see Horn on page 190).
6. Identifier that is always illuminated to indicate that the right scroll wheel can be used with cruise control.
7. Wipers* (see Wipers and Washers on page 228).
8. Right scroll button (see Right Scroll Button on page 187).
9. Voice commands (see Voice Commands on page 391).
*The behaviors associated with the buttons for headlight high beams and wipers vary depending on whether you press or
press and hold the button. Refer to the corresponding sections in this Owner's Manual for details.
NOTE: Simultaneously holding down both the left and right scroll buttons while Model SModel X is parked causes the
touchscreen to restart (see Restarting the Touchscreen on page 197).
Left Scroll Button
Use the scroll button on the left side of the steering yoke to adjust the position of the mirrors and steering yoke. It also
controls the wipers and media player.

• When using media player, push the button to the left to go back to the previous song or station or push it to the right to
skip to the next song or station.
• To increase/decrease the volume of the sound system, roll the button up/down respectively.
NOTE: The scroll button adjusts the volume for media and phone calls based on what is currently in use. As you adjust the
volume, the touchscreen displays the volume level and whether you are adjusting volume for media or phone.
• To mute the media volume, or to pause/play an audio file, push the scroll button.
• When adjusting mirrors, push the button to the left/right to move the associated mirror inward/outward and up/down to
position the mirror upward or downward (see Mirrors on page 192).
• When adjusting the position of the steering wheelsteering yoke, roll the button up/down to adjust the tilt/angle and press
the button to the left or right to move the steering wheelsteering yoke closer or further (see Adjusting Steering
WheelSteering Yoke Position on page 185).
• When a menu displays on the instrument panel from which you can choose options (for example, wipers), use the scroll
button to choose an option (up, down, left, or right).
Right Scroll Button
Use the scroll button on the right side of the steering yoke to control Autopilot features such as Autosteer and Traffic-Aware
Cruise Control:

Owner's Manual

187

Owners Manual

• When driving, push and release the button to engage Autosteer or Traffic-Aware Cruise Control (see Autosteer on page
310). If Autosteer Activation is set to Double Click (touch Controls > Autopilot Activation > Autosteer Activation), a single
push engages Traffic-Aware Cruise Control (see Traffic-Aware Cruise Control on page 299) only and you must push and
release twice to engage Autosteer. Once engaged, pushing the button cancels Autosteer and/or Traffic-Aware Cruise
Control.
• When Model SModel X is in Park, push the button twice to automatically engage Summon (if equipped) before exiting the
vehicle (see Starting Summon Before Exiting the Vehicle on page 332).
• When Traffic-Aware Cruise Control is engaged, rolling the scroll button up/down increase/decreases the set cruising
speed respectively.
NOTE: There is currently no action associated with pushing the right scroll button to the left and right.
Using Left Steering Wheel Buttons
Use the buttons on the left side of the steering wheel to change radio stations, control media player volume, and to choose
what displays on the left side of the instrument panel (whenever the Navigation app is not displaying instructions).

1. Next
If you are listening to local or satellite radio and you have defined more than one radio preset, press to play the next preset

1...678910...66

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
289 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [32.79 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: 2024.26.3_SX_0724.pdf

Replacement Service Bulletin Number:

MFR Communication Date: 2024-07-31

MFR Internal Campaign ID/Software Version: 2024.26.3

Communication Type: Over The Air

NHTSA Components: UNKNOWN OR OTHER

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
  • Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Oil/EPB/SAS/Throttle/Battery Scanner Diagnostic Tool for Vehicles Lifetime Free Update Auto VIN" data-aawp-geotargeting="true"> Sale
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...