WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.

Owner's Manual

217

Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Adjusting the Front Seats

1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support.

218

Owner's Manual

Owners Manual
CAUTION: Do not move a front seat's backrest fully forward when the seat is also in the fully forward position. Doing so
can cause the top of the seat to hit, and potentially damage, the sun visor.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Adjusting the Front Seats

Owner's Manual

219

Owners Manual

220

Owner's Manual

Owners Manual

1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support (if equipped).
CAUTION: Do not move a front seat's backrest fully forward when the seat is also in the fully forward position. Doing so
can cause the top of the seat to hit, and potentially damage, the sun visor.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.

Owner's Manual

221

Owners Manual
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Calibrating Seats

You can calibrate the driver seat. This is useful if you find your seat range limited or your driver profile does not automatically
adjust the seat for you. Navigate to Controls > Service > Driver Seat, Steering & Mirrors Calibration and follow the instructions
on the touchscreen.
WARNING: Ensure nothing is behind or underneath the driver seat during calibration. Failure to do so may cause serious
injury.
Folding Rear Seats
CybertruckModel SModel XModel 3Model Y has a split rear seat that can fold forward.
NOTE: If Model S is equipped with the optional executive rear seats, these seats do not fold forward.
NOTE: Driving with the rear seats folded forward can increase the amount of perceived noise and/or vibration coming from the
rear of the vehicle (trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
Before folding, remove items from the seats and the rear footwell. To allow the rear seat backs to fold completely flat, you may
need to move the front seats forward.

222

Owner's Manual

Owners Manual

To fold a rear seat, pull the corresponding lever and fold the seat forward.

Owner's Manual

223

Owners Manual

224

Owner's Manual

Owners Manual

Adjusting Second Row Seat Backs
CybertruckModel SModel XModel 3Model Y provides seating for up to three passengers in the second row. The seat back is
split 60/40 so adjusting the left seat back moves the seat backs for both the left and center seating positions, whereas
adjusting the right seat back moves only the rightmost seat back.
For vehicles with 5 seats:
Use the adjustment handles on the outside corner of each second row outboard seat back to adjust the corresponding seat
back. While pulling and holding the handle, move the seat back to the desired position, and then release the handle. Ensure the
seat back is securely latched into position by pushing it forward and rearward.

For vehicles with 7 seats:

Owner's Manual

225

Owners Manual
Use the adjustment handles on the side shield of each outboard seating position to adjust the corresponding second row seat
backs. While pulling and holding the handle, move the seat back to the desired position, and then release the handle. Ensure
the seat back is securely latched into position by pushing it forward and rearward.

Folding Second Row Seat Backs
To maximize cargo space, each second row seat back can be folded fully forward to lay flat. While pulling and holding the
handle, push the corresponding seat back fully forward.

NOTE: Before folding seats fully forward, remove any items from the seats and the rear footwell. To allow the seat backs to fold
completely flat, you may need to move the front seats forward.
NOTE: Driving with second row seats folded forward may increase perceivable noise and/or vibration coming from the rear of
the vehicle (trunk, suspension, etc.).
To allow you to carry long items (such as skis) in the rear of CybertruckModel SModel XModel 3Model Y, the center seat back
can also be independently folded forward. Pull the handle on the rear of the seat back to unlatch it, then pull it forward.

226

Owner's Manual

Owners Manual

You can also fold the second row seat backs fully forward by pressing the corresponding switch located on the left side of the
rear trunk. Pressing the switch causes the seat back to swing forward. You can then push it downward so it lays fully flat.

Owner's Manual

227

Owners Manual
WARNING: Before pressing the switch to fold the seat back, you MUST keep body parts (hands, fingers, etc.) and
objects away from the edges of rear seats. The seat can swing forward with considerable force and cause injury or
damage.

To return the seat backs to their upright position, pull it upwards until it locks into place. To confirm that the seat back is
locked in the upright position, try pulling it forward.
NOTE: Before raising a second row seat back, make sure that the seat belts are not trapped behind the backrest.
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
WARNING: Always ensure the seat backs are locked in their upright position by pushing it forward or rearward. Failure to
do so increases the risk of injury.
Moving Second Row Seats (7-seater only)
Lift the bar located beneath each outboard seating position to unlock and move the second row seats forward or rearward. The
bench seats have a 60/40 split. Therefore, the bar on the left side moves the seat for the left and center seats, whereas the bar
on the right side moves only the rightmost seat. Pull up and hold the bar while moving the seat forward or rearward. Release
the lever when the seat is at the desired location. Push the seat rearward and forward to ensure the seat(s) are locked into
position.

228

Owner's Manual

Owners Manual

Raising Rear Seats
Before raising a rear seat, make sure that the seat belts are not trapped behind the backrest.
Pull the seat back upward until it locks into place.
To confirm that the seat back is locked in the upright position, try pulling it forward.
WARNING: Always ensure the seat backs are locked in their upright position by pushing it forward or rearward. Failure to
do so increases the risk of injury.
Adjusting Second Row Monopost Seats
A Model X equipped with monopost seats can accommodate two or three passengers in the second row, depending on the
option chosen at time of purchase. There are two ways to adjust the position of these seats:
• Touch Controls > Seats on the touchscreen. Press and hold the icon associated with the seat you want to adjust. White
icons indicate that the seat can be moved in that direction; gray icons indicate that the seat cannot be moved any farther in
that direction.
NOTE: The front seats may move forward slightly to accommodate the forward movement of the second row seats.
• Use the manual adjustments illustrated below. In addition to moving a seat forward/rearward, the manual seat adjustments
allow you to adjust the backrest. Although the control on the outboard seats is L-shaped, and the control on the middle
seat is circular, they both provide the same functions.

Owner's Manual

229

Owners Manual

1. Move seat forward/backward (up/down on the control) and adjust the backrest (left/right on the control).
2. Move seat forward/backward.
3. Adjust backrest.
NOTE: The backrest locks into position when you release the lever. If a backrest is not locked into position when a driving gear
is engaged, the instrument panel displays an alert for the unlocked backrest. Adjust the backrest again, ensuring it locks into
position.
WARNING: Before driving, ensure the seat is locked in position. You may need to pull the seat forward or backward until
it clicks into place.
Adjusting Second Row Seat Backs (Bench Seats)
If your Model X is equipped with two seating rows, the second row bench seats can accommodate up to three passengers.
Use the mechanical adjustment lever located at the side of each outboard seating position to adjust the seat backs. A bench
seat is split 60/40 so the adjustment lever on the left side moves the seat backs for both the left and center seats, whereas the
lever on the right side moves the rightmost seat back only. While pulling and holding the lever, move the seat back to the
desired position, and then release the lever. When returning a seat back to its upright position, try moving it forward or back to
ensure it is securely latched into position.

230

Owner's Manual

Owners Manual

WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure the backs of occupied seats are reclined no more than
30 degrees when the vehicle is moving.
Folding Second Row Seat Backs (Bench Seats)
The second row seat backs on bench seats can be folded fully forward so they lay flat and maximize cargo space. Pull up the
mechanical lever located on the side of each outboard seat (the same lever you use to recline the seats, as described above),
then push the seat back fully forward. The bench seats have a 60/40 split—therefore, the adjustment lever on the left side
folds the seat backs for both the left and center seats, whereas the lever on the right folds the rightmost seat back only.
NOTE: Before folding seats fully forward, remove any items from the seats and the rear footwell. To allow the seat backs to fold
completely flat, you may need to move the front seats forward.
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
Moving Second Row Bench Seats
NOTE: Only bench seats in seven-seat vehicles can be moved forward and rearward. The bench seats in five-seat vehicles are
stationary.
Use the mechanical lever located beneath each outboard seating position to move the second row seats forward or rearward.
The bench seats have a 60/40 split—therefore, the lever on the left side moves the seat for the left and center seats, whereas
the lever on the right side moves only the rightmost seat. Pull and hold the lever while moving the seat forward or rearward.
Release the lever when the seat is at the desired location.

Owner's Manual

231

Owners Manual

NOTE: You can adjust the position of bench seats using the mechanical levers only. You cannot use the touchscreen to adjust
bench seats.
Accessing Third Row Seats (if equipped) - Monopost Seating
A button is located on the backrest of each outboard monopost seat in the second row. This button makes it easy for
passengers to enter and exit the third row seating positions. Touch Controls > Seats > Easy Entry and choose how you want
this button to work:
• ON - Allows you to tilt and move the associated outboard seat fully forward, and the center seat partially forward, with a
single-press of the button.
• OFF - When off, which is recommended if a child seat is installed in the second row, you must hold the button to move the
second row seats forward.
After using the third row ingress button to access third row seats, simply press the button again to return the seats to their
normal position.

232

Owner's Manual

Owners Manual

WARNING: For vehicles with third row seats, do not use the third row ingress button located on the backrest of a second
row outboard seat when a child is seated in the second row. Using the button tilts and moves the seats forward and can
squeeze the occupant. Do not rely on Model X to recognize or accommodate occupants seated in the vehicle while
using this button. Use this button only when the second row seats are unoccupied.
Guidelines for using the third row ingress button:
• If a front row seat is positioned such that the second row seat will collide with it during an easy entry operation, it
automatically moves forward just enough to accommodate the forward position of the second row monopost seat.
• Forward movement of second row monopost seats cancels if an occupant adjusts a second row seat while it is moving.
• When an outboard seat tilts forward after pressing the button, its backrest resets to the forward position and may need to
be re-adjusted for comfort.
WARNING: Use the third row ingress button to access the third row ONLY when the second row seats are unoccupied.
Do not rely on Model X to recognize or accommodate occupants seated in the vehicle while using the button.
WARNING: Always ensure that the seat is locked in position before traveling. Failure to do so increases the risk of injury.
Accessing Third Row Seats (if equipped) - Bench Seating
A button is located on the backrest of each outboard bench seat in the second row. This button makes it easy for passengers
to enter and exit the third row seating positions. Press and release the button on the left outboard seat to tilt and move the
combined left and center seats forward. Press and release the button on the right outboard seat to tilt and move the right seat
forward.

Owner's Manual

233

Owners Manual

WARNING: For vehicles with third row seats, do not use the third row ingress button located on the backrest of a second
row outboard bench seat when a child is seated in the second row. Using the button allows the combined left and center
seats to be moved forward and can squeeze the occupant. Use this button only when the second row seats are
unoccupied. Before driving, ensure the seat and the seat back are securely latched into position.
In some situations, such as when you are parked on an incline or when the seat's trim affects the movement of the bench seats
after you press the button, the bench seats might not move forward completely, and you may need to push the seats forward
gently until they reach the end of the track.
WARNING: After you use the third row ingress button to access the third row seats, push the bench seats back to their
seating position, ensuring the seats are securely latched into position by trying to move them forward and rearward.
Failure to do so increases the risk of injury.
WARNING: The seat must be fully latched into position before driving. Push or pull the seat until you hear the seat "click"
into place.
Folding and Raising Third Row Seat Backs (if equipped)
To fold a third row seat, press the button located in the top outside corner of the seat. The button has two detents.

234

Owner's Manual

Owners Manual
1. Fold head restraint forward.
2. Fold seat back forward.
To raise the seats, hold the button on the top outside corner of the seat then pull the seat back upward until it latches into
place. Try pulling the seat back forward to confirm that it is locked in the upright position.
NOTE: Before folding third row seat backs, remove any items from the seats and the footwell. To allow the seat backs to fold
completely flat, you may need to move the second row seats forward.
NOTE: Driving with the third row seats backs folded forward might result in increased perceivable noise and/or vibration
coming from the rear of the vehicle (trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
WARNING: Always ensure the seats and seat backs are locked in their upright position before travel. Failure to do so
increases the risk of injury.
Accessing Third Row Seats (7-seater only)
A third row ingress button is located on the backrest of each second row outside seat. This button makes it easy for
passengers to access the third row seating positions. To access a third row seat:
1. Press the button on the associated second row backrest.
NOTE: If you press the button and do not move the seats, the seats relock.
2. Push the second row backrest forward. The seat then releases and pitches upward.
3. Push the seat fully forward.

To relock the seats, first push the seat rearward. You will hear the seat tracks lock. Then push the seat downward to engage
the rear latches onto the floor strikes. You will hear the latches lock. If the seat does not latch onto the floor, the touchscreen
displays a warning indicating that the seat is not properly locked into position.

Owner's Manual

235

Owners Manual

WARNING: Do not use the button when a child is seated in a seat that will move. Using the button moves the combined
left and center seats forward and can squeeze the occupant. Use this button only when the second row seat is
unoccupied. Before driving, ensure the seat and the seat back are securely latched into position.
WARNING: Do not use a second row seating position when the seat is not securely latched into position,
WARNING: After using the button to access the third row, push the second row seat backs into their upright position,
ensuring that the seat backs are securely latched and "clicked" into position by trying to move them forward and
rearward. Failure to do so increases the risk of injury.
WARNING: Keep the area on the underside of the second row seats free of debris to ensure reliable locking of the floor
latches.
WARNING: If an occupant is seated in the the third row when pushing down on the second row seat to engage the floor
latches, ensure that the occupant's feet are not located under the second row seat.
Folding Third Row Seat Backs (7-seater only)
To fold a third row seat, first ensure that the head support is fully down as shown (see Head Supports on page 240). Then
press the button located in the top corner of the seat back and fold the backrest downward.

236

Owner's Manual

Owners Manual

NOTE: To return the seat backs to the upright position, pull the seat back upward until it latches into place. Try pulling the
backrest forward to confirm that it is securely latched in the upright position.
NOTE: Before folding the seat backs, remove any items from the seats and the footwell. To allow the backrests to fold
completely flat, you may need to move the second row seats forward.
NOTE: Driving with the third row backrests folded forward may result in increased perceivable noise and/or vibration coming
from the rear of the vehicle (trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
WARNING: Always ensure the seat backrests are locked in their upright position before travel. Failure to do so increases
the risk of injury.
Head Supports/Restraints
If your Model S is equipped with adjustable head supports, use the round button on the seat to move the head support up/
downUse the round button on the seat to move the head support up/down. The same button is used to adjust the seat's lumbar
support (see Adjusting the Driver’s Seat on page 217). Therefore, when you touch this button, the touchscreen displays a
popup with an image of the seat. If the head support shown on the image is not highlighted in blue, touch this area on the
image to specify that you want to adjust the head support. The selection you choose is saved until you manually change it. You
can save the head support setting to your driver profile (see Driver Profiles on page 514).
NOTE: Head supports are not adjustable on early versions of Model S.

Owner's Manual

237

Owners Manual

The second and third row seats have integrated non-removable head supports that cannot be adjusted. However, the head
supports in the third row seats can be folded down (see Folding and Raising Third Row Seat Backs (if equipped) on page 234).
Head Supports
The front and second row seats include integrated head supports that are not adjustable.
Head Supports
The front seats and the second row outboard seats include integrated head supports that are not adjustable.
The rear center seat includes an adjustable head support that can be raised, lowered, or removed. When occupied by a
passenger that is not seated in a child safety seat, the head support should always be lifted and locked into position (so that
the center is aligned with the center of the occupant's head).

238

Owner's Manual

Owners Manual

WARNING: To minimize the risk of severe injury or death in the event of a collision, ensure that head support is
positioned correctly before sitting in, or operating, CybertruckModel SModel XModel 3Model Y. Always lift and lock the
head support in position before sitting in the rear center seat.
WARNING: When installing a seat belt retained child safety seat in the center seating position in the second row, you
must lower the associated head support (described next).
Raising/Lowering the Rear Center Head Support

To raise the head support, lift it until you hear it click into place. Push down on the head support to ensure that it is secure.
To lower the head support, press and hold the button on the outer base of the right post and press the head support down.

Removing/Installing a Head Support

To remove the head support:
1. Raise the head support as described above.
2. Press and hold the button on the outer base of the right post.

Owner's Manual

239

Owners Manual
3. Insert a short, flat object (such as a small flat-head screwdriver) into the opening on the inside base of the left post and pull
the head support upward.

To re-install the head support:
1. With the front of the head support facing forward, insert both posts into the corresponding holes on the seat back.
2. Press down on the head support until it clicks into place.
3. Pull up on the head support to ensure that it is secure.
WARNING: Ensure that the head support is correctly installed before seating an occupant. Failure to do so increases
the risk of injury or death if a collision occurs.
Head Supports
The front seats include integrated head supports that you can not adjust.
The second row outboard seats include an adjustable head support that you can raise, lower, or remove. When either of these
seats is occupied by a passenger that is not in a child safety seat, the corresponding head support should be adjusted (align
the center of the head support with the center of the occupant's head) and locked into position. To raise a head support on a
second row outboard seat, pull it upward to the desired position. To lower it, press and hold the button on the base of the
outer post while pushing it downward.

The second row center seat, and both third row seats (if equipped), are equipped with the option to raise a head support.
Initially stowed into the seat's back rest, you can access the head support by pulling it upward.
WARNING: When installing a child safety seat in a second row seating position, or in the third row (if equipped), you
must lower the head support. The headrest must be raised and locked in place when sitting in the rear middle seat.

240

Owner's Manual

Owners Manual
To stow the head support in the second row center seat, press and hold the button on the base of the post while pushing the
head support fully downward.

To lower a head support in the third row, press and hold the button on the base of the post while pushing the head support
fully downward.

WARNING: To minimize the risk of severe injury or death in the event of a collision, ensure that head supports are
positioned correctly before driving.
Removing/Installing a Head Support

All head supports in the second and third row (if equipped) seating positions can be removed. To remove a head support:
1. Fully raise the head support by pulling it upward.
2. Press and hold the button located at the base of one of the posts.
3. Insert a short, flat object (such as a small flat-head screwdriver) into the opening in the base of the opposite post and pull
the head support upward.

Owner's Manual

241

Owners Manual

To re-install the head support:
1. With the front of the head support facing forward, insert both posts into the corresponding holes on the seat back.
2. Press downward on the head support until it clicks into place.
3. Pull upward on the head support to ensure that it is secure.
WARNING: Ensure that the head support is correctly installed before seating an occupant. Failure to do so increases the
risk of injury or death if a collision occurs.
Seat Heaters
The front and rear and second row seats operate at three levels from 3 (highest) to 1 (lowest). To operate the seat heaters, see
Operating Climate Controls on page 669.
If CybertruckModel SModel XModel 3Model Y is equipped with the cold weather package, you can also control seat heaters in
all rear seating positions, as well as wiper defrosters and washer nozzles by touching the climate controls on the touchscreen.
WARNING: To avoid burns resulting from prolonged use, individuals who have peripheral neuropathy, or whose capacity
to feel pain is limited because of diabetes, age, neurological injury, or some other condition, should exercise caution
when using the climate control system and seat heaters.
Seat Covers
WARNING: Do not use seat covers on a front seata seat equipped with a seat-mounted airbag (see Location of Airbags
on page 320). Doing so could restrict deployment of the seat-mounted side airbags if a collision occurs. Also, if the
vehicle is equipped with an occupant detection system that is used to determine the status of the passenger front
airbag, seat covers may interfere with this system.

Front and Rear Seats
Correct Driving Position
The seat, head support, seat belt and airbags work together to maximize your safety. Using these correctly ensures greater
protection.

242

Owner's Manual

Owners Manual

Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:
1. Sit upright with both feet on the floor and the seat back in an upright position.
2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheelsteering
yoke (or steering wheel). Your chest should be at least 10 inches (25 cm) from the center of the airbag cover.
3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt
tightly across your hips, not across your stomach.
CybertruckModel SModel XModel 3Model Y front seats include integrated head supports that cannot be adjusted or
removed.

Owner's Manual

243

Owners Manual
Adjusting the Front Seats

1. Move seat forward/backward and adjust the seat’s height and tilt angle up/down.
2. Adjust backrest.
3. Adjust lumbar support.
WARNING: Before adjusting a front seat, check that the area around the seat is free of obstacles (people and objects).
WARNING: Do not adjust seats while driving. Doing so increases the risk of a collision.
WARNING: Riding in a moving vehicle with the seat back reclined can result in serious injuries in a collision, as you could
slide under the lap belt or be propelled into the seat belt. Ensure your seat back is reclined no more than 30 degrees
when the vehicle is moving.
Calibrating Seats
(If equipped) You can calibrate the driver seat. This is useful if you find your seat range limited or your driver profile does not
automatically adjust the seat for you. Navigate to Controls > Service > Driver Seat, Steering & Mirrors Calibration and follow the
instructions on the touchscreen.
WARNING: Ensure nothing is behind or underneath the driver seat during calibration. Failure to do so may cause serious
injury.

244

Owner's Manual

Owners Manual
Folding Rear Seats
CybertruckModel SModel XModel 3Model Y has a split rear seat that can fold forward.
NOTE: If Model S is equipped with the optional executive rear seats, these seats do not fold forward.
Before folding, remove items from the seats and the rear footwell. To allow the rear seats to fold completely flat, you may need
to move the front seats forward. To fold a rear seat, push the corresponding button on the back of the seat.

You can also fold the rear seats fully forward by pressing the corresponding switch located on the left side of the rear trunk.
Pressing the switch causes the seat to unlatch. You can then push it downward to lay it fully flat.

To return the seats to their upright position, pull upwards until it locks into place. To confirm that the seat is locked in the
upright position, try pulling it forward.
NOTE: Driving with the rear seats folded may increase noise in the cabin area (for example, you may hear vibration sounds
coming from the rear of the vehicle such as the trunk, suspension, etc.).
CAUTION: Before folding seats all the way down, ensure the seat belt is unbuckled and there are no objects remaining
on the seat.
CAUTION: While raising a rear seat back, hold the seat belt out of the way to ensure that the seat belt is not trapped
behind the backrest or caught in the seat latch.
WARNING: Always ensure that the seats are locked in their upright position by attempting to push it forward or
rearward, ensuring the latch is fully engaged. Failure to do so can increase the risk of injury.

Owner's Manual

245

Owners Manual
Head Supports
The front seats include integrated head supports that you cannot adjust.
The rear outboard seating positions include an adjustable head support that can be raised/lowered or removed. The head
support should always be raised and locked into position (so that the center is aligned with the center of the occupant's head)
when occupied by a passenger that is not in a child safety seat.
Lift the head support to the desired position. To lower the head support, press and hold the button on the base of the outer
post while pushing down on the head support.

To remove a head support:
1. Lift the headrest to raise it.
2. Press and hold the button located at the base of the right post.
3. Insert a short, flat object (such as a small flat-head screwdriver) into the opening on the inside base of the opposite post
and pull the head support upward.

246

Owner's Manual

Owners Manual
Seat Heaters
All seats contain heating pads. In addition, both front seats are ventilated. You can control seat heaters in all seating positions
using the touchscreen.
WARNING: To avoid burns resulting from prolonged use, individuals who have peripheral neuropathy, or whose capacity
to feel pain is limited because of diabetes, age, neurological injury, or some other condition, should exercise caution
when using the climate control system and seat heaters.
Seat Covers
WARNING: Do not use seat covers on front seats. Doing so could restrict deployment of the seat-mounted side air bags
if a collision occurs. Seat covers can also interfere with the occupant detection system that is used to determine the
status of the passenger front airbag.

Front and Rear Seats
Correct Driving Position
The seat, head support, seat belt and airbags work together to maximize your safety. Using these correctly ensures greater
protection.

Position the seat so you can wear the seat belt correctly, while being as far away from the front airbag as possible:
1. Sit upright with both feet on the floor and the seat back in an upright position.
2. Make sure you can easily reach the pedals and that your arms are slightly bent when holding the steering wheelsteering
yoke (or steering wheel). Your chest should be at least 10 inches (25 cm) from the center of the airbag cover.
3. Place the shoulder section of the seat belt mid-way between your neck and your shoulder. Fit the lap section of the belt
tightly across your hips, not across your stomach.
CybertruckModel SModel XModel 3Model Y seats include integrated head supports that cannot be adjusted or removed.

Owner's Manual