NHTSA ID Number: 11003085
Manufacturer Communication Number: 2024.20.3_0624.pdf
TSB/Document Date: 2024-07-03
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
charger (depending on date of manufacture)a wireless phone charger, and a 12V power socket.
USB Ports
CybertruckModel SModel XModel 3Model Y has two USB ports located in the front compartment of the center console. These
ports can be used to:
• Connect and charge USB devices.
• Play audio files stored on a phone or USB device (see Playing Media from Devices on page 707).
• Save videos when using features such as Sentry Mode or Dashcam (see Dashcam on page 659 and Sentry Mode on page
662).
NOTE: If your Model Y is equipped with a USB port located in the glove box (described below), it is recommended that you
use the glovebox USB to save Sentry Mode or Dashcam videos because power consumption is minimized and the location
is more secure.
• Save videos when using features such as Sentry Mode or Dashcam (see Sentry Mode on page 662 and Dashcam on page
659).
• For saving Sentry Mode and Dashcam video footage, use the USB port located in the glove box. Doing so increases
security and minimizes power consumption.
The USB ports can output power up to approximately 15W (which may vary depending on vehicle manufacture date).
NOTE: For some vehicles manufactured after approximately November 1, 2021, the center console USB ports may only support
charging devices. Use the USB port inside the glove box for all other functions.
The left port is USB-C compatible whereas the right port is USB-A (on vehicles manufactured before approximately June,
2020, both ports are USB-A).
The left port is USB-C compatible whereas the right port is USB-A.
Both ports are USB-C compatible.
Open the center console door below the touchscreen and lift the phone dock upward to access the front USB ports.
See USB Drive Requirements for Recording Videos on page 664 for information about formatting USB flash drives.
Open the front compartment of the center console. The front USB ports are located on the rear wall of the compartment.
Owner's Manual
49
Owners Manual
Depending on date of manufacture, some vehicles include a USB port located inside the glovebox. This USB-A port is
equipped with a pre-formatted flash drive, ready to save videos when using features such as Sentry Mode and Dashcam.
Although not its primary purpose, this port can also communicate with the vehicle and can be used to charge a USBconnected device.
50
Owner's Manual
Owners Manual
Two additional USB ports are located in the rear of the center console (on vehicles manufactured since approximately June
2020, these ports are USB-C). These ports charge USB-connected devices but do not communicate with the vehicle.
Owner's Manual
51
Owners Manual
If CybertruckModel SModel XModel 3Model Y is equipped with seven seats, two USB-C ports are located at the front of the
console located between the third row seats. These ports charge USB-connected devices but do not communicate with the
vehicle.
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Preconditioning, Keep Climate On, Dog Mode,
Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low voltage battery is being charged or is
in use, during HV charging, when the vehicle is communicating with the mobile app, etc. Leaving an accessory plugged in
does not deplete the low voltage battery.
NOTE: Use USB 3.0 compliant cables to connect a device to a USB port. Using non-compliant cables can result in slower
charging, potential connection problems or degraded performance.
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from being
recognized by Media Player, Sentry Mode, Dashcam, etc.
USB Ports
Your CybertruckModel SModel XModel 3Model Y has two USB ports located on the front of the center console that you can
use to connect USB devices. To play audio files stored on a USB drive connected to these ports, see Playing Media from
Devices on page 707. You can also use these ports to charge USB devices.
52
Owner's Manual
Owners Manual
In addition, Model X has two charge-only USB ports located at the rear of the center console, and another charge-only
connection located between the third row seats (if equipped).
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from being
recognized by the Media Player.
NOTE: You can charge four devices simultaneously using the two ports at the front of the center console and the two at the
rear of the console.
NOTE: Power is available whenever the vehicle is considered "awake" The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Preconditioning, Cabin Overheat Protection, Keep
Climate On, Dog Mode, Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low voltage
battery is being charged or is in use, during HV charging, when the vehicle is communicating with the mobile app, etc. Leaving
an accessory plugged in does not deplete the low voltage battery.
Installing Phone Charging Cable
To make it easy to connect your phone while keeping the console free of clutter, you can install a phone charging cable in
CybertruckModel SModel XModel 3Model Y.
NOTE: The phone dock supports two phones side-by-side.
To install a phone charging cable:
1. Open both center console doors in front of the cup holders.
2. Remove the rubber mat from the phone dock.
3. Lift the phone dock to access the USB ports.
4. Release the cover from the base of the phone dock by sliding it to the left.
5. Plug the USB connector on the phone charging cable into a USB port.
6. Insert the phone end of the charging cable through the bottom of the phone dock and route the cable through the securing
tabs towards the bottom of the phone dock.
7. Reinstall the cover to the base of the phone dock by sliding it to the right.
8. Lower the phone dock and reinstall the rubber mat.
Wireless Phone Charger
A wireless phone charger (if equipped), is integrated into the front console to provide up to 15W of power to charge a Qienabled phone. Simply place your phone on the charger. Your device may feel warm while charging, but this is a normal effect
of inductive charging.
Owner's Manual
53
Owners Manual
When placed on the wireless charger, your phone charges whenever the vehicle is powered on (the touchscreen is on and you
are inside the vehicle). Your phone will not charge after exiting the vehicle unless a feature (such as Sentry mode) is enabled
and providing power to the USB ports. CybertruckModel SModel XModel 3Model Y will also not charge a phone if the
vehicle's Battery is discharged.
NOTE: The wireless phone charger may not work if your phone case is too large or is made of metal. Try removing the phone
from its case before placing in the charger.
CAUTION: The phone must be in direct contact with the wireless charger. Do not place objects between the phone and
the charger (for example, credit cards, key cards, coins, keys, metal objects, etc.).
Low Voltage Power Socket
Your CybertruckModel SModel XModel 3Model Y has a power socket located in the center console's rear compartment.
The power socket is suitable for accessories requiring up to 12A continuous draw (16A peak).
NOTE: For vehicles manufactured after approximately November 2021, power inverters plugged into the low voltage power
socket must support 16V DC input to function.
An additional low voltage power socket is located on the left side of the rear trunk.
54
Owner's Manual
Owners Manual
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Preconditioning, Cabin Overheat Protection, Keep
Climate On, Dog Mode, Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low voltage
battery is being charged or is in use, during HV charging, when the vehicle is communicating with the mobile app, etc. Leaving
an accessory plugged in does not deplete the low voltage battery.
WARNING: The power socket and an accessory’s connector can become hot.
WARNING: To prevent excessive interference with the vehicle’s electronics, Tesla recommends that you do not plug any
non-Tesla accessories, including power inverters, into the low voltage power socket. However, if you do use a non-Tesla
accessory and notice any malfunctions or unexpected behavior, such as indicator lights, alert messages, or excessive
heat from the accessory, unplug the accessory from the low voltage power socket immediately.
CAUTION: Do not attempt to jump start CybertruckModel SModel XModel 3Model Y using the low voltage power
socket. Doing so can result in damage.
Low Voltage Power Socket
Your CybertruckModel SModel XModel 3Model Y has a power socket located on the front of the center console. An additional
low voltage power socket is located in the rear trunk. Power is available whenever the instrument panel and touchscreen are
on.
The low voltage power socket issockets are suitable for accessories requiring up to 11A continuous draw (15A peak) or a
maximum of 150 continuous watts (180 watts peak).
Owner's Manual
55
Owners Manual
NOTE: Power is available whenever the vehicle is considered "awake" The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Preconditioning, Cabin Overheat Protection, Keep
Climate On, Dog Mode, Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low voltage
battery is being charged or is in use, during HV charging, when the vehicle is communicating with the mobile app, etc. Leaving
an accessory plugged in does not deplete the low voltage battery.
NOTE: In situations where CybertruckModel SModel XModel 3Model Y is unable to detect the key fob (low battery,
interference, etc.), place it immediately below the low voltage power socket in the center console where
CybertruckModel SModel XModel 3Model Y can best detect it.
WARNING: The power socket and an accessory’s connector can become hot.
56
Owner's Manual
Owners Manual
Interior Electronics
In addition to storage compartments and cup holders (see Interior Storage on page 191), the
CybertruckModel SModel XModel 3Model Y interior supports various electronics such as USB ports, wireless phone
chargers, and a 12V power socket.
USB Ports
CybertruckModel SModel XModel 3Model Y has five USB ports:
• Two USB ports are located in the front compartment of the center console. These can be used to charge USB devices and
to play audio files from a phone or USB device (see Playing Media from Devices on page 707).
• Two USB ports are located below the rear touchscreen that can be used to charge USB devices.
• One USB port is located inside the glovebox. This port is equipped with a USB flash drive. The secure location of this USB
port makes it ideal for saving Sentry Mode and Dashcam video footage.
The USB ports can output power up to approximately 27W (which may vary depending on vehicle manufacture date).
See USB Drive Requirements for Recording Videos on page 664 for information about formatting USB flash drives.
To access the front USB ports, open the front compartment of the center console. The front USB ports are located on the rear
wall of the compartment:
Rear USB ports are located below the rear touchscreen:
Owner's Manual
57
Owners Manual
Glovebox USB port:
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Keep Climate On, Dog Mode, Camp Mode, or Sentry
Mode are enabled. The vehicle is also awake whenever the low voltage battery is being charged or is in use, during high
voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an accessory plugged in does not
deplete the low voltage battery.
NOTE: Use USB 3.0 compliant cables to connect a device to a USB port. Using non-compliant cables can result in slower
charging, potential connection problems or degraded performance.
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from being
recognized by Media Player, Sentry Mode, Dashcam, etc.
USB Ports
CybertruckModel SModel XModel 3Model Y has four USB ports. The three USB-C ports output up to approximately 42W or
two ports up to approximately 65W.
• One USB-C port is located in the rear compartment of the center console used to charge USB devices.
58
Owner's Manual
Owners Manual
• Two USB-C ports are located below the rear touchscreen that can be used to charge USB devices.
• One USB-A port is located inside the glovebox. This port is equipped with a USB flash drive. The secure location of this
USB port makes it ideal for saving Sentry Mode and Dashcam video footage. It also supports audio files from a phone or
USB device (see Playing Media from Devices on page 707).
See USB Drive Requirements for Recording Videos on page 664 for information about formatting USB flash drives.
Owner's Manual
59
Owners Manual
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Keep Climate On, Dog Mode, Camp Mode, or Sentry
Mode are enabled. The vehicle is also awake whenever the low voltage battery is being charged or is in use, during high
voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an accessory plugged in does not
deplete the low voltage battery.
NOTE: Use USB 3.0 compliant cables to connect a device to a USB port. Using non-compliant cables can result in slower
charging, potential connection problems or degraded performance.
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from being
recognized by Media Player, Sentry Mode, Dashcam, etc.
Wireless Phone Chargers
Wireless phone chargers are integrated into the front console, providing up to 15W of power to charge Qi-enabled phones. To
charge your phone, place it on one of the two charge pads. The phone must be in direct contact with the wireless charger. Do
not place objects between the phone and the charger (for example, credit cards, key cards, coins, keys, metal objects, etc.).
Your device may feel warm while charging, but this is a normal effect of inductive charging.
CAUTION: Remove NFC cards (for example, the vehicle key card, credit cards, or hotel key) from integrated phone cases
before charging your phone to avoid damage to the card.
When placed on the wireless charger, your phone charges whenever the vehicle is powered on (the touchscreen is on and you
are in the vehicle). Your phone does not charge when you leave the vehicle unless a feature, such as Keep Climate On, Dog
Mode, Camp Mode, or Sentry Mode is enabled.
NOTE: The wireless phone charger may not work if your phone case is too thick or is made of metal. Try removing the phone
from its case before placing it on the charger.
NOTE: The wireless phone charger does not charge if the vehicle's high voltage Battery is discharged.
60
Owner's Manual
Owners Manual
Low Voltage Power Socket
Your CybertruckModel SModel XModel 3Model Y has a power socket located in the center console's compartment. To access
the low voltage socket, open the front compartment of the center console.
The power socket is suitable for accessories requiring up to 12A continuous draw (16A peak).
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Cabin Overheat Protection, Keep Climate On, Dog
Mode, Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low voltage battery is being
charged or is in use, during high voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an
accessory plugged in does not deplete the low voltage battery.
WARNING: The power socket and an accessory’s connector can become hot.
WARNING: To prevent excessive interference with the vehicle’s electronics, Tesla recommends that you do not plug any
non-Tesla accessories, including power inverters, into the low voltage power socket. However, if you do use a non-Tesla
accessory and notice any malfunctions or unexpected behavior, such as indicator lights, alert messages, or excessive
heat from the accessory, unplug the accessory from the low voltage power socket immediately.
NOTE: A power inverter plugged into the low voltage power socket must support 16V DC input to function.
CAUTION: Do not attempt to jump start CybertruckModel SModel XModel 3Model Y using the low voltage power
socket. Doing so can result in damage.
Owner's Manual
61
Owners Manual
Active Road Noise Reduction
CybertruckModel SModel XModel 3Model Y is equipped with Active Road Noise Reduction which reduces low-frequency
road noise while driving on rough surfaces. To accomplish this, the vehicle uses the seat microphones to measure noise in the
cabin, then generates anti-noise through the speakers to intelligently create quiet zones around each occupantthe front
occupants depending on vehicle and environmental factors.
To turn Active Road Noise Reduction on or off, open the Media Player and touch Audio Settings icon > Options > Active Road
Noise Reduction (the audio settings icon shows an equalizer with three vertical lines). This may require several minutes of
driving time to calibrate before enabling.
NOTE: To ensure active noise reduction operates effectively, avoid covering the microphones (with seat covers, etc.). Active
Road Noise Reduction may disable if a window is rolled down, door is open, or the fan is turned up. Active Road Noise
Reduction also disables if there is a rear passenger in the vehicle.
CAUTION: To prevent damage to these microphones when cleaning, do not over-saturate the area of the seats where the
microphones are located.
62
Owner's Manual
Owners Manual
Interior Electronics
In addition to storage compartments and cup holders (see Interior Storage on page 191), the
CybertruckModel SModel XModel 3Model Y interior supports various electronics such as USB ports, wireless phone
chargers, and a 12V power socket.
USB Ports
CybertruckModel SModel XModel 3Model Y has five USB ports:
• Two USB ports are located in the front compartment of the center console. These can be used to charge USB devices and
to play audio files from a phone or USB device (see Playing Media from Devices on page 707).
• Two USB ports are located below the rear touchscreen that can be used to charge USB devices.
• One USB port is located inside the glovebox. This port is equipped with a USB flash drive. The secure location of this USB
port makes it ideal for saving Sentry Mode and Dashcam video footage.
The USB ports can output power up to approximately 27W (which may vary depending on vehicle manufacture date).
See USB Drive Requirements for Recording Videos on page 664 for information about formatting USB flash drives.
To access the front USB ports, open the front compartment of the center console. The front USB ports are located on the rear
wall of the compartment:
Rear USB ports are located below the rear touchscreen:
Owner's Manual
63
Owners Manual
Glovebox USB port:
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Keep Climate On, Dog Mode, Camp Mode, or Sentry
Mode are enabled. The vehicle is also awake whenever the low voltage battery is being charged or is in use, during high
voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an accessory plugged in does not
deplete the low voltage battery.
NOTE: Use USB 3.0 compliant cables to connect a device to a USB port. Using non-compliant cables can result in slower
charging, potential connection problems or degraded performance.
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from being
recognized by Media Player, Sentry Mode, Dashcam, etc.
USB Ports
CybertruckModel SModel XModel 3Model Y has four USB ports. The three USB-C ports output up to approximately 42W or
two ports up to approximately 65W.
• One USB-C port is located in the rear compartment of the center console used to charge USB devices.
64
Owner's Manual
Owners Manual
• Two USB-C ports are located below the rear touchscreen that can be used to charge USB devices.
• One USB-A port is located inside the glovebox. This port is equipped with a USB flash drive. The secure location of this
USB port makes it ideal for saving Sentry Mode and Dashcam video footage. It also supports audio files from a phone or
USB device (see Playing Media from Devices on page 707).
See USB Drive Requirements for Recording Videos on page 664 for information about formatting USB flash drives.
Owner's Manual
65
Owners Manual
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Keep Climate On, Dog Mode, Camp Mode, or Sentry
Mode are enabled. The vehicle is also awake whenever the low voltage battery is being charged or is in use, during high
voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an accessory plugged in does not
deplete the low voltage battery.
NOTE: Use USB 3.0 compliant cables to connect a device to a USB port. Using non-compliant cables can result in slower
charging, potential connection problems or degraded performance.
NOTE: Do not connect multiple devices using a USB hub. This can prevent connected devices from charging or from being
recognized by Media Player, Sentry Mode, Dashcam, etc.
Wireless Phone Chargers
Wireless phone chargers are integrated into the front console, providing up to 15W of power to charge Qi-enabled phones. To
charge your phone, place it on one of the two charge pads. The phone must be in direct contact with the wireless charger. Do
not place objects between the phone and the charger (for example, credit cards, key cards, coins, keys, metal objects, etc.).
Your device may feel warm while charging, but this is a normal effect of inductive charging.
CAUTION: Remove NFC cards (for example, the vehicle key card, credit cards, or hotel key) from integrated phone cases
before charging your phone to avoid damage to the card.
When placed on the wireless charger, your phone charges whenever the vehicle is powered on (the touchscreen is on and you
are in the vehicle). Your phone does not charge when you leave the vehicle unless a feature, such as Keep Climate On, Dog
Mode, Camp Mode, or Sentry Mode is enabled.
NOTE: The wireless phone charger may not work if your phone case is too thick or is made of metal. Try removing the phone
from its case before placing it on the charger.
NOTE: The wireless phone charger does not charge if the vehicle's high voltage Battery is discharged.
66
Owner's Manual
Owners Manual
Low Voltage Power Socket
Your CybertruckModel SModel XModel 3Model Y has a power socket located in the center console's compartment. To access
the low voltage socket, open the front compartment of the center console.
The power socket is suitable for accessories requiring up to 12A continuous draw (16A peak).
NOTE: Power is available whenever the vehicle is considered "awake". The vehicle may be awake for many reasons. For
example, when using features such as Summon, or when features such as Cabin Overheat Protection, Keep Climate On, Dog
Mode, Camp Mode, Sentry Mode, etc. are enabled. The vehicle is also awake whenever the low voltage battery is being
charged or is in use, during high voltage charging, when the vehicle is communicating with the mobile app, etc. Leaving an
accessory plugged in does not deplete the low voltage battery.
WARNING: The power socket and an accessory’s connector can become hot.
WARNING: To prevent excessive interference with the vehicle’s electronics, Tesla recommends that you do not plug any
non-Tesla accessories, including power inverters, into the low voltage power socket. However, if you do use a non-Tesla
accessory and notice any malfunctions or unexpected behavior, such as indicator lights, alert messages, or excessive
heat from the accessory, unplug the accessory from the low voltage power socket immediately.
NOTE: A power inverter plugged into the low voltage power socket must support 16V DC input to function.
CAUTION: Do not attempt to jump start CybertruckModel SModel XModel 3Model Y using the low voltage power
socket. Doing so can result in damage.
Owner's Manual
67
Owners Manual
Active Road Noise Reduction
CybertruckModel SModel XModel 3Model Y is equipped with Active Road Noise Reduction which reduces low-frequency
road noise while driving on rough surfaces. To accomplish this, the vehicle uses the seat microphones to measure noise in the
cabin, then generates anti-noise through the speakers to intelligently create quiet zones around each occupantthe front
occupants depending on vehicle and environmental factors.
To turn Active Road Noise Reduction on or off, open the Media Player and touch Audio Settings icon > Options > Active Road
Noise Reduction (the audio settings icon shows an equalizer with three vertical lines). This may require several minutes of
driving time to calibrate before enabling.
NOTE: To ensure active noise reduction operates effectively, avoid covering the microphones (with seat covers, etc.). Active
Road Noise Reduction may disable if a window is rolled down, door is open, or the fan is turned up. Active Road Noise
Reduction also disables if there is a rear passenger in the vehicle.
CAUTION: To prevent damage to these microphones when cleaning, do not over-saturate the area of the seats where the
microphones are located.
Car Status
Overview
The touchscreen displays the status of CybertruckModel SModel XModel 3Model Y at all times. What you see depends on
whether the vehicle is:
• Parked (shown below).
• Driving (see Driving Status on page 74).
• Charging (see Charging Status on page 731).
When CybertruckModel SModel XModel 3Model Y is parked, the status area shows the drive mode, estimated range, and an
overhead view of the car with buttons you can touch to open the trunks and charge port door. When you press the brake,
CybertruckModel SModel XModel 3Model Y powers up and indicator lights flash briefly. Unless an indicator light applies to
the current situation (for example, a seat belt is not fastened), it should turn off. If an indicator light fails to turn on or off,
contact Tesla.
NOTE: The following image is provided for demonstration purposes only. Depending on vehicle options, software version, and
market region, the information displayed may be slightly different.
68
Owner's Manual
Owners Manual
Owner's Manual
69
Owners Manual
70
Owner's Manual
Owners Manual
Cards
The bottom of the car status display also shows shortcut "cards" for quick access to Media, tire pressure data, trip
information, and more. Swipe the cards to the left or right to customize your cards shortcuts.
Indicator Lights
The following indicator lights illuminate to advise you or alert you of a specific status or condition.
If the touchscreen displays this red brake indicator at any time other than briefly when you first start
CybertruckModel SModel XModel 3Model Y, a brake system fault is detected, or the level of the brake
fluid is low. Contact Tesla immediately. Apply steady pressure and keep the brake pedal firmly pressed to
stop the vehicle when safe to do so.
USA:
Canada:
Owner's Manual
If the touchscreen displays this red brake indicator at any time other than briefly when you first start
CybertruckModel SModel XModel 3Model Y, a brake system fault is detected, or the level of the brake
fluid is low. Contact Tesla immediately. Apply steady pressure and keep the brake pedal firmly pressed
to stop the vehicle when safe to do so.
71
Owners Manual
The touchscreen displays this amber brake indicator if a brake booster fault is detected. Apply steady
pressure and keep the brake pedal firmly pressed to stop the vehicle when safe to do so. Hydraulic Boost
Compensation will be active (see Braking and Stopping on page 461).
USA:
The touchscreen displays this amber brake indicator if a brake booster fault is detected. Apply steady
pressure and keep the brake pedal firmly pressed to stop the vehicle when safe to do so. Hydraulic
Boost Compensation will be active (see Braking and Stopping on page 461).
Canada:
USA:
Canada:
The ABS indicator briefly flashes amber on the touchscreen when you first start
CybertruckModel SModel XModel 3Model Y. If this indicator lights up at any other time, an ABS fault has
occurred and the ABS is not operating. Contact Tesla. The braking system remains fully operational and is
not affected by an ABS failure. However, braking distances may increase. Drive cautiously and avoid heavy
braking.
The ABS indicator briefly flashes amber on the touchscreen when you first start
CybertruckModel SModel XModel 3Model Y. If this indicator lights up at any other time, an ABS fault has
occurred and the ABS is not operating. Contact Tesla. The braking system remains fully operational and
is not affected by an ABS failure. However, braking distances may increase. Drive cautiously and avoid
heavy braking.
When you manually apply the parking brake using the touchscreen, the red parking brake indicator lights
up on the touchscreen.
USA:
When you manually apply the parking brake using the touchscreen, the red parking brake indicator
lights up on the touchscreen.
Canada:
If the parking brake experiences an electrical issue, the amber parking brake indicator lights up and a fault
message displays on the touchscreen.
USA:
If the parking brake experiences an electrical issue, the amber parking brake indicator lights up and a
fault message displays on the touchscreen.
Canada:
Tire pressure warning. The pressure of a tire is out of range. If a fault with the Tire Pressure Monitoring
System (TPMS) is detected, the indicator flashes. For a TPMS fault, contact Tesla. See Tire Care and
Maintenance on page 752.
A seat belt for an occupied seat is not fastened. See Seat Belts on page 254.
72
Owner's Manual
Owners Manual
Airbag safety. If this indicator does not flash on briefly when CybertruckModel SModel XModel 3Model Y
prepares to drive, or if it remains on, contact Tesla immediately. See Airbag Warnings on page 341.
Front fog lights are on, if equipped. See Lights on page 421.
Front fog lights are on, if equipped. See Lights on page 421.
The rear fog indicator displays on the touchscreen whenever rear fog lights are on.
Parking lights are on (side marker lights, tail lights, and license plate lights) . See Lights on page 421Lights
on page 421Lights on page 433.
Low beam headlights are on.
High beam headlights are on and Auto High BeamAdaptive HeadlightsAuto High Beam is disabled or currently
unavailable.
Auto High BeamAdaptive HeadlightsAuto High Beam is enabled and high beams are on.
CybertruckModel SModel XModel 3Model Y is ready to turn off the high beams if light is detected. See
High Beam Headlights on page 422High Beam Headlights on page 435.
Auto High BeamAdaptive HeadlightsAuto High Beam is enabled but high beams are not on because light is
detected in front of CybertruckModel SModel XModel 3Model Y. When light is no longer detected, high
beams automatically turn back on. See High Beam Headlights on page 422High Beam Headlights on page
435.
This indicator flashes amber when the electronic stability control systems are actively minimizing wheel spin
by controlling brake pressure and motor power. See Traction Control on page 496. If this indicator remains
on, a fault is detected and you should immediately contact Tesla.
Electronic stability control systems are no longer minimizing wheel spin. On a Rear Wheel Drive vehicle, the
traction control system has been turned off, or on an All-Wheel Drive vehicle, Slip Start has been enabled.
See Traction Control on page 496.
Owner's Manual
73
Owners Manual
Trailer mode (if equipped) is active (see Towing and Accessories on page 528).
Vehicle Hold is actively applying the brakes. See Vehicle Hold on page 493.
A door or trunk is open. See Doors on page 131, Rear Trunk on page 165, or Front Trunk on page 181.
A blue snowflake appears when some of the energy stored in the Battery may not be available due to cold
weather conditions. During these cold weather conditions, charging rates may also be limited. If
CybertruckModel SModel XModel 3Model Y is plugged in, you can heat your Battery by turning on climate
control with the mobile app. The snowflake disappears when the Battery is sufficiently warm.
Appears when regenerative braking is limited. See Regenerative Braking on page 463 for more information.
Vehicle power is currently being limited because the energy remaining in the Battery is low, the vehicle's
systems are being heated or cooled, or an error is detected by the drive inverter.
See Popup Messages and Vehicle Alerts on page 34 for more information about alert popups on your vehicle's touchscreen.
Driving Status
When CybertruckModel SModel XModel 3Model Y is driving (or ready to drive), the touchscreen shows your current driving
status and a real-time visualization of the road as detected by the Autopilot components (see Cameras on page 101). The
visualization automatically zooms in and out to better utilize touchscreen space and inform you when a vehicle is detected in
your blind spot.
NOTE: The following illustration is provided for demonstration purposes only. Depending on vehicle options, software version,
and market region, the information displayed may be slightly different.
74
Owner's Manual
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.20.3_0624.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-06-30
MFR Internal Campaign ID/Software Version: 2024.20.3
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.