vehicle.
WARNING: According to collision statistics, children are safer when properly restrained in the rear seating positions than
in the front seating positions.
WARNING: Do not use a forward facing child safety seat until your child weighs over 20 lbs (9 kg) and can sit
independently. Up to the age of two, a child's spine and neck are not sufficiently developed to avoid injury in a frontal
impact.
WARNING: Do not allow a baby or infant to be held on an adult's lap. All children should be restrained in an appropriate
child safety seat at all times.
WARNING: To ensure children are safely seated, follow all instructions provided in this document and by the
manufacturer of the child safety seat.
WARNING: Children should ride in a rear facing child safety seat using the seat’s integrated 5-point harness for as long
as possible.
WARNING: Do not use seat belt extenders on a seat belt that is being used to install a child safety seat or booster seat.
WARNING: When seating larger children, make sure the child's head is supported and the child’s seat belt is properly
adjusted and fastened. The shoulder portion of the belt must be away from the face and neck, and the lap portion must
not be over the stomach.
WARNING: Never attach two child safety seats to one anchor point. In a collision, one anchor point may be incapable of
securing both seats.
WARNING: Child restraint anchors are designed to withstand only those loads imposed by correctly fitted child
restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or
equipment to the vehicle.
WARNING: Always check harnesses and tether straps for damage and wear.
WARNING: Never leave a child unattended, even if the child is secured in a child safety seat.
WARNING: Never use a child safety seat that has been involved in a collision. Have the seat inspected or replaced as
described in the child safety seat manufacturer’s instructions.

270

Owner's Manual

Owners Manual
Child Safety Seats
Guidelines for Seating Children
Your CybertruckModel SModel XModel 3Model Y seat belts are designed for adults and larger children. You must restrain
infants and small children in a rear seating position only, and you must use a suitable child safety seat appropriate for the
child’s age, weight, and size.
WARNING: Never seat a child on a rear-facing child seat with an ACTIVE AIRBAG in front of it. DEATH or SERIOUS
INJURY to the child can occur. See Airbag Status Indicator on page 335.
WARNING: Never seat a child on a seat with an ACTIVE AIRBAG in front of it. DEATH or SERIOUS INJURY to the child
can occur.
WARNING: Always ensure that all CybertruckModel SModel XModel 3Model Y seats are locked in position before
traveling. Failure to do so increases the risk of injury. Pay attention to all warnings displayed on the touchscreen.
WARNING: Do not associate the Easy Entry setting with the driver's profile when a child is seated in the second row.
Doing so can cause the driver's seat to push against the child, especially when a child is seated in a forward-facing child
seat or booster seat. Do not rely on CybertruckModel SModel XModel 3Model Y to recognize or accommodate a child
seated in the second row while using this setting (see Driver Profiles on page 514).
Refer to the following label located on the sun visors.
NOTE: The image shown below is representative only and may not be identical to the label(s) in your vehicle.

CybertruckModel SModel XModel 3Model Y has an occupancy sensor in the front passenger seat that controls the status of
the passenger front airbag (see Airbags on page 331).
When driving with a child seat on the front passenger seat, always double-check the status of the passenger
front airbag to confirm that it is OFF.
To protect an adult subsequently occupying the front passenger seat, check to verify that the passenger
front airbag is ON.

Owner's Manual

271

Owners Manual
Choosing a Child Safety Seat
All children age 12 and under should ride in the second and third row seats. Always use a child safety seat suitable for a young
child’s age and weight. The following table is based on child safety seat recommendations determined by the National
Highway Traffic Safety Administration (NHTSA) in the United States (for more information, go to www.nhtsa.gov/ChildSafety/
Guidance).
Infants

Toddlers

Young children

Age

Birth to 1 year*

Over 1 year*

4 years and older, and less
than 57 in. (145 cm) tall

Weight

Up to at least 20 lbs (9 kg)**

Over 20 lbs (9 kg) (minimum)
and up to 40 lbs (18 kg)*

Over 40 lbs (18 kg)

Type of child safety seat

Rear-facing (or convertible)

Forward-facing (or
convertible)*

Seat belt retained booster
seat

Seat position

Rear-facing only*

Forward-facing*

Forward-facing

Recommended attachment
method

If combined weight of child
and safety seat is up to 65
lbs (29.5 kg), attach using
either LATCH** (lower
anchor only) or the seat belt
only.*** If combined weight
of child and safety seat is
over 65 lbs (29.5 kg), attach
using the seat belt only.***

If combined weight of child and
safety seat is up to 65 lbs (29.5
kg), attach using either
LATCH** (both lower anchors
and top tether anchor), or the
seat belt and upper tether
strap.*** If combined weight of
child and safety seat is over 65
lbs (29.5 kg), attach using the
seat belt and upper tether
strap.***

Secure the booster seat
using lower LATCH anchors
(if available) and then
restrain the child with the
seat belt. If the booster seat
is not equipped with LATCH
anchors, then secure the
booster seat with the child
using the seat belt. However,
if the combined weight of the
child and booster seat
exceeds 65 lbs (29 kg),
secure the booster seat with
the child using the seat belt
only.****

* Many child safety seats currently available allow children to ride rear-facing using the child safety seat’s integrated 5-point
harness for a longer period of time BASED UPON SPECIFIC HEIGHT AND WEIGHT LIMITS. Keep your child in a rear-facing seat
for as long as possible. CHECK THE CHILD SAFETY SEAT MANUFACTURER’S INSTRUCTIONS AND CAREFULLY FOLLOW ALL
INSTRUCTIONS
** ISOFIX is the international standard for attachment points for child safety seats in passenger cars. The system has other
regional names including LATCH ("Lower Anchors and Tethers for Children") in the United States and LUAS ("Lower
Universal Anchorage System") or Canfix in Canada. It has also been called the "Universal Child Safety Seat System" or
UCSSS.
*** Subject to instructions provided by the child safety seat manufacturer.
****In the center seating position, the vehicle's head support can be adjusted if the booster seat is not equipped with an
integrated head support.
NOTE: When installing a child restraint system, you must also buckle the seat belt to silence the seat belt warning chime.
WARNING: Laws that govern how and where children should be carried when traveling in a vehicle are subject to change.
It is the driver’s responsibility to keep up to date on, and comply with, all current regulations in the region(s) where
CybertruckModel SModel XModel 3Model Y is driven. To check the child passenger safety laws for states in the U.S.,
go to: http://www.ghsa.org/html/stateinfo/laws/childsafety_laws.html.
WARNING: Do not use LATCH/Isofix/i-Size anchors with child safety seats or booster seats that have an integral safety
belt where the combined weight of the child plus the child safety seat exceeds 65 lbs (29.5 kg).
WARNING: Do not use Easy Entry (as described in Driver Profiles on page 514) to automatically move the driver's seat to
the full rearward position if a child safety seat is installed in the second row located behind the driver's seat. With
reduced clearance, the movement of the seat may impact a child's legs, cause injury, or dislodge the seat.

272

Owner's Manual

Owners Manual
Seating Larger Children

If a child is too large to fit into a child safety seat, but too small to safely fit into the standard seat belts, use a booster seat
appropriate for the child’s age and size. Carefully follow the manufacturer’s instructions to secure the booster seat.
The automatic locking retractor (ALR) feature is not used for booster seats in which a large child is restrained by the vehicle's
seat belts directly, and therefore not using a child safety seat's integrated restraints.
Installing Child Safety Seats
There are two general methods used to install child safety seats:
• Seat belt retained - these seats are secured using the vehicle’s seat belts.
• LATCH retained - these seats attach to anchor bars built into the second row seats.
Check the child safety seat manufacturer’s instructions and the table provided in this document to determine which
installation method to use. Some child safety seats can be installed using either method. Always follow the child safety seat
manufacturer’s instructions.
Installing Seat Belt Retained Child Seats
First, make sure that the child safety seat is appropriate for the weight, height, and age of the child.
Avoid dressing the child in bulky clothing and do not place any objects between the child and the restraint system.
Adjust harnesses for every child, every trip.
To securely hold child safety seats, all passenger seating positions are equipped with an automatic locking retractor (ALR)
that, by pulling the seat belt beyond the length needed for a typical adult occupant, locks the belt into place until the seat belt
is unbuckled and the webbing is fully retracted. The ALR mechanism operates as a ratchet, winding in slack and preventing the
seat belt from extending any further until it has been completely rewound. When installing a child safety seat, engage the
belt's automatic locking retractor by pulling the seat belt webbing until it is fully extended. The ALR system engages only
when the seat belt is at its maximum extension point.
The automatic locking retractor (ALR) feature is not used for booster seats in which a large child is restrained by the vehicle's
seat belts directly, and therefore not using a child safety seat's integrated restraints.
NOTE: An automatic locking retractor disengages only when the seat belt is unbuckled and fully retracted. The belt can then
be worn as a normal belt, sliding freely in and out and locking tight only in an emergency. Once disengaged, the belt must be
fully extended to re-engage the locking mechanism whenever you install a child safety seat.

Owner's Manual

273

Owners Manual
Always follow the detailed instructions provided by the child safety seat manufacturer. General guidelines are provided below.
1. Place the child safety seat in CybertruckModel SModel XModel 3Model Y, and fully extend the seat belt. Route and buckle
the seat belt in accordance with the child safety seat manufacturer’s instructions.

2. Allow the seat belt to retract, and remove all slack in the seat belt while firmly pushing the child safety seat into the
CybertruckModel SModel XModel 3Model Y seat.
3. Once all slack has been removed, forcefully pull the seat belt webbing to confirm that the automatic locking retractor (ALR)
is engaged.
NOTE: The ALR disengages only after unbuckling and fully retracting the seat belt webbing. Once disengaged, the belt
must be fully extended to re-engage the locking mechanism.
4. If the seat belt retained child safety seat has an upper tether, attach it to the back of the seat (see Attaching Upper Tether
Straps on page 276).
Installing LATCH (ISOFIX) Child Seats
Lower LATCH anchors are provided in the second row outboard seats. The anchors are located between the seat's back rest
and rear cushion. The exact location of each anchor is identified by a child safety seat identification button, illustrated below.
The button is located on the seat, near the associated anchor.

274

Owner's Manual

Owners Manual

For the second row, install LATCH child safety seats in the outboard seating positions only. Use only a seat belt retained seat in
the center position.

To install a LATCH child safety seat, slide the safety seat latches onto the anchor bars until they click into place. Carefully read
and follow the instructions provided by the child safety seat manufacturer.
NOTE: Lower LATCH anchors should not be used with child seats or booster seats that have an integrated safety belt in
situations where the combined weight of the child plus the child restraint is more than 65 lbs (29.5 kg). In these situations, use
the safety belt instead.

Owner's Manual

275

Owners Manual

NOTE: If CybertruckModel SModel XModel 3Model Y is equipped with seven seats, the third row seating positions are not
equipped with LATCH anchors. Use only seat belt retained child safety seats in a third row seating position.

Once installed, test the security of the installation before seating a child. Attempt to twist the child safety seat from side to
side and try to pull it away from the seat, then check to ensure the anchors remain securely in place.
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its hook to the anchor point located behind the seat.
NOTE: The location of anchor points may not be readily visible but can be found by identifying a slice in the seat's material.
WARNING: Tighten upper tether straps according to the instructions provided by the manufacturer of the child safety
seat.
WARNING: USE ONLY SEAT BELT RETAINED CHILD SAFETY SEATS IN THE CENTER SEATING POSITION.

276

Owner's Manual

Owners Manual

Make sure the hook is fully seated on the anchor point.

For dual-strap tethers, position a strap on each side of the head support.

For dual-strap tethers in the third row (if equipped), position both straps over the head support.

Owner's Manual

277

Owners Manual

WARNING: Before running a tether strap OVER a head support, you MUST LOWER the head support (see Head
Supports on page 240).
For single-strap tethers at the outboard seating positions, run the strap over the outside-facing side of the head support
(same side of the head support as the seat belt retraction mechanism).

If routing the strap over the outside-facing side of the head support is not possible (such as there is not enough slack in the
strap), raise the head support (see Head Supports on page 240) and route the strap under the head support.

278

Owner's Manual

Owners Manual

For a single-strap tether in the third row (if equipped), position the strap over the head support.

Testing a Child Safety Seat
Before seating a child, always make sure the child safety seat is not loose:
1. Hold the child safety seat by the belt path and try to slide the safety seat from side to side and front to back.

Owner's Manual

279

Owners Manual
2. If the seat moves more than one inch (2.5 cm), it is too loose. Tighten the belt or reconnect the LATCH retained child safety
seat.
3. If you are unable to reduce slack, try a different seat location or try another child safety seat.
Child Safety Seat Warnings
WARNING: Extreme hazard! Do not seat a child on the front passenger seat even if you are using a child safety seat. This
seat has an airbag in front of it. Although this airbag is disabled when CybertruckModel SModel XModel 3Model Y
detects a lightweight passenger, do not rely on technology to protect your child.
WARNING: Seat belt retained child safety seats are designed to be secured in the vehicle using lap seat belts or the lap
belt portion of a lap-shoulder seat belt. Children could be endangered in a crash if their child safety seat is not properly
secured.
WARNING: According to collision statistics, children are safer when properly restrained in the second row seating
positions than in the front passenger seat.
WARNING: Do not use a forward-facing child safety seat until your child weighs over 20 lbs (9 kg) and can sit
independently. Up to the age of two, a child's spine and neck are not sufficiently developed to avoid injury in a frontal
impact.
WARNING: Do not allow a baby or infant to be held on an adult's lap. All children should be restrained in an appropriate
child safety seat at all times.
WARNING: To ensure children are safely seated, follow all instructions provided in this document and by the
manufacturer of the child safety seat.
WARNING: Children should ride in a rear-facing child safety seat using the seat’s integrated 5-point harness for as long
as possible.
WARNING: Do not use seat belt extenders on a seat belt that is being used to install a child safety seat or booster seat.
WARNING: When seating larger children, make sure the child's head is supported and the child’s seat belt is properly
adjusted and fastened. The shoulder portion of the belt must be away from the face and neck, and the lap portion must
not be over the stomach.
WARNING: Never attach two child safety seats to one anchor point. In a collision, one anchor point may be incapable of
securing both seats.
WARNING: Child restraint anchors are designed to withstand only those loads imposed by correctly fitted child
restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or
equipment to the vehicle.
WARNING: Always check harnesses and tether straps for damage and wear.
WARNING: Never leave a child unattended, even if the child is secured in a child safety seat.
WARNING: Never use a child safety seat that has been involved in a collision. Have the seat inspected or replaced as
described in the child safety seat manufacturer’s instructions.

280

Owner's Manual

Owners Manual
Child Safety Seats
Guidelines for Seating Children
Your CybertruckModel SModel XModel 3Model Y seat belts are designed for adults and larger children. You must restrain
infants and small children in rear seats only, and you must use a suitable child safety seat appropriate for the child’s age,
weight, and size.
Never use child safety seats in the front passenger seat.
WARNING: Never seat a child in the front passenger seat, even if using a child safety seat.
WARNING: Never seat a child on a seat with an ACTIVE AIRBAG in front of it. DEATH or SERIOUS INJURY to the child
can occur.
WARNING: For vehicles with third row seats, when a child is seated in a second row monopost seat, the setting for the
button that moves a second row outboard seat forward for easy access into the third row should be OFF (touch Controls
> Seats > Easy Entry). This ensures that you need to manually hold the button to move the seat, preventing a child seated
in the second row from being pushed against the corresponding front seat.
Refer to the following label located on the sun visors.
NOTE: The image(s) shown below are representative only and may not be identical to the labels in your vehicle.

CybertruckModel SModel XModel 3Model Y has an occupancy sensor in the front passenger seat that controls the passenger
front airbag (see Airbags on page 320).
The Passenger Airbag Off indicator displays on the touchscreen when the passenger front airbag is OFF.
When the passenger front airbag is OFF, it does not inflate when a collision occurs. This indicator also
displays when the seat is unoccupied. Before driving with a child seated on the front passenger seat, always
double-check the status of the passenger front airbag to confirm that it is OFF.
NOTE: In cars manufactured prior to approximately December 2019, the Passenger Airbag Off indicator does
not display when the seat is unoccupied.
To protect an adult occupying the front passenger seat, always double-check the passenger front airbag to
confirm that it is ON.
WARNING: Always ensure that all CybertruckModel SModel XModel 3Model Y seats are locked in position before
traveling. Failure to do so increases the risk of injury. Pay attention to all warnings displayed on the touchscreen.
WARNING: Do not associate the Easy Entry setting with the driver's profile when a child is seated in a second row seat.
Doing so can cause the driver's seat to push against the child, especially when a child is seated in a forward-facing child
seat or booster seat. Do not rely on CybertruckModel SModel XModel 3Model Y to recognize or accommodate a child
seated in the second row seats while using this setting (see Driver Profiles on page 514).
Choosing a Child Safety Seat
All children age 12 and under should ride in the second and third row seats. Always use a child safety seat suitable for a young
child’s age and weight. The following table is based on child safety seat recommendations determined by the National
Highway Traffic Safety Administration (NHTSA) in the United States (for more information, go to www.nhtsa.gov/equipment/
car-seats-and-booster-seats).

Owner's Manual

281

Owners Manual
Infants

Toddlers

Young children

Age

Birth to 1 year*

Over 1 year*

4 years and older, and less than
57 in. (145 cm) tall

Weight

Up to at least 20 lbs (9 kg)**

Over 20 lbs (9 kg) (minimum) and
up to 40 lbs (18 kg)*

Over 40 lbs (18 kg)

Type of child safety seat

Rear-facing (or convertible)

Forward-facing (or convertible)*

Seat belt retained booster seat

Seat position

Rear-facing only*

Forward-facing*

Forward-facing

Recommended attachment
method

If combined weight of child and
safety seat is up to 65 lbs (29.5
kg), attach using either LATCH**
(lower anchor only) or the seat
belt only.*** If combined weight
of child and safety seat is over
65 lbs (29.5 kg), attach using the
seat belt only.***

If combined weight of child and
safety seat is up to 65 lbs (29.5 kg),
attach using either LATCH** (both
lower anchors and top tether
anchor), or the seat belt and upper
tether strap.*** If combined weight
of child and safety seat is over 65
lbs (29.5 kg), attach using the seat
belt and upper tether strap.***

Secure the booster seat using
lower LATCH anchors (if
available) and then restrain the
child with the seat belt. If the
booster seat is not equipped with
LATCH anchors, then secure the
booster seat with the child using
the seat belt. However, if the
combined weight of the child and
booster seat exceeds 65 lbs
(29 kg), secure the booster seat
with the child using the seat belt
only.

* Many child safety seats currently available allow children to ride rear-facing using the child safety seat’s integrated 5-point harness for a
longer period of time BASED UPON SPECIFIC HEIGHT AND WEIGHT LIMITS. Keep your child in a rear-facing seat for as long as possible.
CHECK THE CHILD SAFETY SEAT MANUFACTURER’S INSTRUCTIONS AND CAREFULLY FOLLOW ALL INSTRUCTIONS.
** LATCH ("Lower Anchors and Tethers for Children") and ISOFIX are international standards for attachment points for child safety seats in
passenger cars that enable compliant child safety seats to be quickly and safely secured. The system has other regional names including
LUAS ("Lower Universal Anchorage System") or Canfix in Canada. It has also been called the "Universal Child Safety Seat System" or UCSSS.
*** Subject to instructions provided by the child safety seat manufacturer.

NOTE: When installing a child restraint system, you must also buckle the seat belt to silence the seat belt warning chime.
WARNING: Laws that govern how and where children should be carried when traveling in a vehicle are subject to change.
It is the driver’s responsibility to keep up to date on, and comply with, all current regulations in the region(s) where
CybertruckModel SModel XModel 3Model Y is driven. To check the child passenger safety laws for states in the U.S.,
go to: http://www.ghsa.org/html/stateinfo/laws/childsafety_laws.html.
WARNING: Do not use LATCH anchors with child safety seats or booster seats that have an integral safety belt where
the combined weight of the child plus the child safety seat exceeds 65 lbs (29.5 kg).

282

Owner's Manual

Owners Manual
Seating Larger Children

If a child is too large to fit into a child safety seat, but too small to safely fit into the standard seat belts, use a booster seat
appropriate for the child’s age and size. Carefully follow the manufacturer’s instructions to secure the booster seat.
Installing Child Safety Seats
Second Row Seats
• Seat belt retained - these seats are secured using the vehicle’s seat belts (see Installing Seat Belt Retained Child Seats on
page 283).
• LATCH retained - these seats attach to anchor bars built into the vehicle’s second row outboard seats (see Installing
LATCH Child Seats (Second Row) on page 284).
Third Row Seats
• Seat belt retained - these seats are secured using the vehicle’s seat belts (see Installing Seat Belt Retained Child Seats on
page 283).
• LATCH retained - these seats attach to anchor bars built into the vehicle’s third row seats, if equipped (see Installing
LATCH Child Seats (Third Row) on page 289).
Check the child safety seat manufacturer’s instructions and the table in this owner's manual to determine which installation
method to use. Some child safety seats can be installed using either method. Always follow the child safety seat
manufacturer’s instructions.
Installing Seat Belt Retained Child Seats
First, make sure that the child safety seat is appropriate for the weight, height, and age of the child.
Avoid dressing the child in bulky clothing and do not place any objects between the child and the restraint system.
Adjust harnesses for every child, every trip.

Owner's Manual

283

Owners Manual
To securely hold child safety seats, all passenger seating positions are equipped with an automatic locking retractor (ALR)
feature that, by fully extracting the seat belt (beyond the length needed for a typical adult occupant), locks the belt into place
until the seat belt is unbuckled and the webbing is fully retracted. The ALR mechanism operates as a ratchet, winding in slack
and preventing the seat belt from extending any further until it has been completely rewound. When installing a child safety
seat with integrated restraints, engage the belt's automatic locking retractor by pulling the seat belt webbing until it is fully
extended. The ALR system engages only when the seat belt is at its maximum extension point.
The automatic locking retractor (ALR) feature is not used for booster seats in which a large child is restrained by the vehicle's
seat belts directly, and therefore not using a child safety seat's integrated restraints.
NOTE: An automatic locking retractor disengages only when the seat belt is unbuckled and fully retracted. The belt can then
be worn as a normal belt, sliding freely in and out and locking tight only in an emergency. Once disengaged, the belt must be
fully extended to re-engage the locking mechanism whenever you install a child safety seat.
Always follow the detailed instructions provided by the child safety seat manufacturer. General guidelines are provided below.
1. Place the child safety seat in CybertruckModel SModel XModel 3Model Y, and fully extend the seat belt. Route and buckle
the seat belt in accordance with the child safety seat manufacturer’s instructions.

2. Allow the seat belt to retract, and remove all slack in the seat belt while firmly pushing the child safety seat into the
CybertruckModel SModel XModel 3Model Y seat.
3. Once all slack has been removed, forcefully pull the seat belt webbing to confirm that the automatic locking retractor (ALR)
is engaged.
NOTE: The ALR disengages only after unbuckling and fully retracting the seat belt webbing. Once disengaged, the belt
must be fully extended to re-engage the locking mechanism.
4. If the seat belt retained child safety seat has an upper tether, attach it to the back of the seat (see Attaching Upper Tether
Straps on page 291).
Installing LATCH Child Seats (Second Row)
Lower LATCH anchors are provided in the second row seats (and third row seats, if equipped). The anchors are located
between the seat's rear back rest and lower cushion. The exact location of each anchor is identified by a child safety seat
identification button, illustrated below. The button is located on the seat back, directly above its associated anchor.
Bench Seats

284

Owner's Manual

Owners Manual

Monopost Seats

Owner's Manual

285

Owners Manual

In the second row, install LATCH child safety seats in the outboard seating positions only. Use only a seat belt retained seat in
the center position.
NOTE: If Model X is equipped with two seats in the second row, both seats support the use of LATCH child safety seats.
NOTE: Second row outboard seats support the use of upper tether straps (see Attaching Upper Tether Straps on page 291).
WARNING: Before driving after installing a child seat in the second row, ensure that a "seat unlocked" warning does NOT
display on the touchscreen or instrument panel. This warning indicates that the seat is unsafe for an occupant because it
was not returned to its safe, locked position. If the touchscreen or instrument panel displays the warning message, move
the seat or backrest slightly forward or backward until it locks firmly into position and the message no longer displays.
Bench Seats

286

Owner's Manual

Owners Manual
NOTE: To accommodate large rear-facing LATCH child safety seats, you may need to move the seat in the full rearward
position, and move the corresponding front seat forward to the mid-track position (up to 13 cm forward of the rearmost
position), raise the seat upward (3 cm from its lowest position), and angle the seat back to 15 degrees (or 10 degrees rearward
from its forward-most position).
WARNING: Do not associate the Easy Entry setting with the driver's profile when a child is seated in the second row.
Doing so can cause the driver's seat to push against the child, especially when a child is seated in a forward-facing child
seat or booster seat. Do not rely on CybertruckModel SModel XModel 3Model Y to recognize or accommodate a child
seated in the second row while using this setting (see Driver Profiles on page 514).
Monopost Seats

NOTE: To accommodate large rear-facing LATCH child safety seats, you may need to move the seat in the full rearward
position, and move the corresponding front seat forward to the mid-track position (up to 13 cm forward of the rearmost
position), raise the seat upward (3 cm from its lowest position), and angle the seat back to 15 degrees (or 10 degrees rearward
from its forward-most position).
WARNING: For vehicles with third row seats, when a child is seated in a second row monopost seat, the setting for the
button that moves a second row outboard seat forward for easy access into the third row should be OFF (touch Controls
> Seats > Easy Entry). This ensures that you need to manually hold the button to move the seat, preventing a child seated
in the second row from being pushed against the corresponding front seat.
To install a LATCH child safety seat, slide the safety seat latches onto the anchor bars until they click into place. Carefully read
and follow the instructions provided by the child safety seat manufacturer.
Bench Seats

Owner's Manual

287

Owners Manual

Monopost Seats