NHTSA ID Number: 11002990
Manufacturer Communication Number: Circular 97PB
TSB/Document Date: 2024-07-02
Summary
Due to the installation of an incorrect accessory rearview mirror, the toll module and exterior side mirror auto-dimming functions were disabled. To correct these issues, dealers will replace the rearview mirror assembly with the correct part at no cost to customers.
Service Action
Code: 97PB
Subject
Rearview Mirror
Document History
Date
Summary
06/04/2024
Affected Vehicles
Country
USA
USA
Original publication
Beginning
Model
Year
2024
2024
Ending
Model
Year
2024
2024
Vehicle
Q8 E-TRON QUATTRO
Q8 SPORTBACK E-TRON QUATTRO
Vehicle
Count
87
18
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
About this Service
Action
Code Visibility
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Due to the installation of an incorrect accessory rearview mirror, the toll module and
exterior side mirror auto-dimming functions were disabled. To correct these issues, dealers
will replace the rearview mirror assembly with the correct part at no cost to customers.
On or about June 04, 2024, the campaign code will be applied to affected vehicles.
Owner Notification
Owner notification will take place in June 2024. Owner letter examples are included in this
bulletin for your reference.
Campaign Expiration
Date
This campaign expires on June 04, 2029. Work must be performed on or before this date to
be eligible for payment. Keep this expiration date in mind when scheduling customers for this
action. If a customer wishes to have this work performed after the expiration date, your normal
costs associated with this work will apply.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 1 of 9
Parts Information
Criteria
Quantity
01
1
Part Number
P.O.C. Part Description
4KE-857-511-C 9B9 MIRROR
Parts Control Type:
Free Order
Parts will be managed by Free Order.
Initial Allocation:
NO
There will be no parts allocation.
Ordering Method
(see description below)
Free Order
NOTE
Your dealer’s Estimated Remaining Repairs by campaign can be found in Parts on Command.
Click on “View Campaign List” and review the Estimated Remaining Repairs column.
NOTE
Campaign parts should always be ordered as per the parts information in this circular. The ordering system will
supersede the part, if applicable.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Audi
dealer. 2024 Audi
Group of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 2 of 9
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit the request through Audi
Warranty Online under the Campaigns/Update option.
Service Number
97PB
Damage Code
0099
Parts Vendor Code
Claim Type
002
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Criteria I.D.
Mark MIRROR* as causal part
Do not claim wash/loaner under this action
01
LABOR
Labor Op
Time Units
Description
6827 19 00
SEE ELSA
Inside Mirror remove+reinstall
2706 89 50
SEE ELSA
Battery charge
0150 00 60
Time stated on
diagnostic protocol
GFF/Guided functions
(Clear fault memory)
PARTS
Quantity
Part Number
Description
1.00
4KE857511C 9B9
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 3 of 9
Customer Letter Example (USA)
This notice applies to your vehicle: ,
Subject: Service Action 97PB – Rearview Mirror
Dear Audi
Owner,
As part of Audi
’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a service
action on certain 2024 model year Audi
vehicles. Our records show that you are the owner of a vehicle affected by this
action.
About this Service Action:
Due to the installation of an incorrect accessory rearview mirror, the toll module and exterior side mirror auto-dimming
functions were disabled. To correct these issues, dealers will replace the rearview mirror assembly with the correct part
at no cost to customers.
This work will take about an hour to complete and will be performed for you free of charge. Please keep in mind that
your dealer may need additional time for the preparation of the work, as well as to accommodate their daily workshop
schedule.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi
dealer as soon as possible to schedule
this work. For your convenience, you can also visit www.audiusa.com and click on the “Find a Dealer” link to locate a
dealer near you and schedule this service.
Additional Information
•
This service action will be available for you free of charge only until June 04, 2029. If you wish to have this
service performed after that date, your dealer’s normal costs associated with this repair will apply.
•
If you are the lessor and registered owner of the vehicle identified in this action, please forward this letter
immediately via first-class mail to the lessee within ten (10) days of receipt.
•
If your authorized Audi
dealer fails or is unable to complete this work free of charge within a reasonable time, if
you have changed your address or sold the vehicle, or if you should have any questions about this
communication, please contact Audi
Customer Experience at 1-800-253-2834 or via our “Contact Us” page at
www.audiusa.com.
•
To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please visit the
Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle Identification Number (VIN).
We apologize for any inconvenience this matter may cause; however, we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 4 of 9
Repair Overview
•
Replace interior rearview mirror.
NOTE
•
These repair instructions may differ from the labor operations and labor times listed in ELSA.
•
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.
•
This procedure must be read in its entirety prior to performing the repair.
•
Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not
identically match all affected vehicles.
•
Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
•
When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate
inside the shop to avoid temperature-related component damage/breakage.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 5 of 9
Required Tools
Battery Tester/Charger
capable of minimum 90
Amp continuous supply
Diagnostic Tester
-VAS6150X/6160X(or equivalent)
Scraper Set
-VAS6845(or equivalent)
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 6 of 9
Repair Instruction
Section A - Check for Previous Repair
•
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a
copy with the repair order.
•
Confirm the Campaign/Action is open . If the status is closed, no further work is
required.
•
Note the Applicable Criteria ID for use
in determining the correct work to be done and
corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are
open, they must be performed in order of the Start
date . The oldest should be performed
first.
•
All Safety Recalls must be completed prior to
completing this campaign.
•
Proceed to Section B.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 7 of 9
Section B – Repair Procedure
NOTE
If the following fault is stored, complete this repair before performing further diagnosis:
•
U116300: Automatic dimming interior mirror no communication.
Replace interior rearview mirror:
•
Replace the interior rearview mirror per the
ELSA repair manual:
o
Repair manual > Body > Body Interior
> 68 Interior Equipment > Interior
Rearview Mirror > Interior Rearview
Mirror, Removing and Installing.
Part Number
Part Description
4KE-857-511-C 9B9
Interior rearview mirror
NOTE
Vehicles affected by the 97PB are not equipped with
a J844 control module. The replacement test plan
listed in the repair manual does not need to be
performed.
Clear fault memory:
•
Scan the vehicle using GFF.
•
Exit the GFF session to clear the fault
memory and send the diagnostic protocol
online.
Proceed to section C
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 8 of 9
Section C – Campaign Completion Stamp
•
Once the campaign has been completed,
the technician should stamp the repair
order.
•
Stamps are available for ordering through
the Compliance Label Ordering Portal.
•
Proceed to Section D.
Item#: AUD4927ENG
Section D - Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local
requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2024 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
97PB Page 9 of 9
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular 97PB
Replacement Service Bulletin Number:
MFR Communication Date: 2024-06-04
MFR Internal Campaign ID/Software Version: 97PB
Communication Type: Service Campaign
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




