Release Date

Technical Service Bulletin

04/17/2024

94CB UPDATE
Software Update for Light Control Module – (NVLW)
Applicable Vehicles

Country

Beginning Model Year

Ending Model Year

Vehicle

Vehicle Count

USA
USA
CAN
CAN

2024
2024
2024
2024

2024
2024
2024
2024

Q8
SQ8
Q8
SQ8

475
396
92
67

Revision History
Revision

Date

Purpose

2

05/02/2024

Updated work instructions

1

04/17/2024

Original publication

Condition/Technical Background
This Update has been proactively released to prevent the following condition(s) from occurring in the vehicle:
Criteria

Technical Background

01

An erroneous fault message may appear in the instrument cluster due to a software issue in the control unit
for the headlights.

Remedy
Criteria
01

Remedy
Update the software for the light control module.

This Update is in effect until removed.
Vehicle must meet all of the following criteria:
• Procedure is valid only for vehicles that show the 94CB code in the Elsa Campaign/Action Information screen
on the day of repair.
• Vehicle must be within the New Vehicle Limited Warranty.
• Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin.
• Procedure must be performed on applicable vehicles in dealer inventory prior to sale.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 1 of 7

Release Date

04/17/2024

Technical Service Bulletin

94CB UPDATE
Software Update for Light Control Module – (NVLW)

Service
NOTE:
•

Elsa is the only valid inquiry/verification source. Check Elsa on the day this vehicle UPDATE will be
performed to verify vehicle eligibility for the UPDATE. Status must show “open”. Attach an Elsa printout
showing the “open” status to the repair order.

•

If this UPDATE appears to have already been performed but the code still shows open in Elsa, contact
Warranty before proceeding further. Another dealer may have recently performed this UPDATE but not
yet entered a claim for it in the system.

•

Elsa may also show additional open action(s); if so, inform your customer - this work can be done while
the vehicle is in for this UPDATE.

•

Contact the Warranty Helpline (U.S.) or the Warranty Campaign Specialist (Canada) if you have any
questions.

•

Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.

TIP
On the date of repair, print this screen and keep a
copy with the repair order.
•

Confirm the Campaign/Action is open . If the status is closed, no further work is
required.

•

Note the Applicable Criteria ID for
use in determining the correct work to be done
and corresponding parts associated.
CRITICAL REPAIR STEP

STOP!
If multiple software update Campaign/Actions are
open, they must be performed in order of the Start
date . The oldest should be performed
first.
•

All Safety Recalls must be completed prior
to completing this campaign.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 2 of 7

Release Date

04/17/2024

Technical Service Bulletin

94CB UPDATE
Software Update for Light Control Module – (NVLW)

SVM Update Instructions
NOTE
Prior to launching the VAS Diagnostic Tester and starting an update, ensure the following conditions are met;
The ODIS software is completely up to date.
•

Refer to the “Current ODIS Service Version” circular found in Elsa2Go Service References.

The battery charger is connected to the vehicle battery and remains connected for the duration of the
software update.
•

Battery voltage must remain above 12.5 volts for the duration of the software update. Failure to
do so may cause the update to fail, which could result in damage to the control module. Control
modules damaged by insufficient voltage will not be covered.

The screen saver and power saving settings are off.
•

Failure to do so may result in the tester entering power save mode during the software update,
which could result in damage to the control module.

The VAS Diagnostic Tester is plugged in using the supplied power adapters.
•

Under no circumstances should the tester be used on battery power alone during the software
update. Failure to do so may result in the tester powering off during the update, which could result
in damage to the control module.

The VAS Diagnostics Interface MUST ONLY be connected to the tester with a USB cable.
•

Performing a software update using a Bluetooth or WiFi connection increases the risk of losing
connection during the update, which could result in damage to the control module.
It also greatly increases the time required to perform the update. Requests for additional time or
parts will be denied if the GFF log shows the update was performed using Bluetooth or WiFi.

TIP
As a best practice, customer presets should be documented prior to performing any update in the event these
settings are lost during the update.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 3 of 7

Release Date

04/17/2024

Technical Service Bulletin

94CB UPDATE
Software Update for Light Control Module – (NVLW)
NOTE
•

All campaign software updates must be completed during a single, standalone ODIS Diagnostic Session.
You must fully complete this campaign and send all logs before beginning any other campaigns or
operations.

•

If there are any ODIS “Hot-Fix” patches installed, they must be removed from the scan tool before
beginning this operation. ODIS “Hot-Fix” patches may affect the update process.

WARNING
Radiator Fan(s) may cycle ON high speed during the Update Process! There is a serious risk that personal injury
may result if contact is made with spinning fan blades. Keep hands and all objects away from Radiator Fan(s)
during Update Process!
TIP
To Update-Programming using SVM, review and follow instructions in Technical Bulletin 2014603: Software
Version Management (SVM) Operating Instructions.
The SVM Process must be completed in its entirety so the database receives the update confirmation response.
A warranty claim may not be reimbursed if there is no confirmation response to support the claim.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 4 of 7

Release Date

Technical Service Bulletin

04/17/2024

94CB UPDATE
Software Update for Light Control Module – (NVLW)
•

Connect the battery charger.

•

Switch off all consumers, air conditioning, heater blower motor, lights, heated seats, etc.

•

Ensure the latest version of ODIS is downloaded.

•

Ensure diagnostic head is connected to ODIS tester via USB cable.

•

Move selector lever to P.

IMPORTANT REPAIR STEPS
The steps below must be followed!
CRITICAL REPAIR STEP

STOP!
DO NOT enter SVM code 94CBA216 during the replacement test plan for diagnostic address 00D6. Entering
the SVM code during the replacement test plan can result in the information from the headlight modules not
being read out properly and faults being stored in the headlight modules.
•

Switch ON the headlights and leave them on until the procedure is complete.

•

Scan the vehicle using GFF.

•

Under Guided Functions of diagnostic address 00D6, perform the replacement test plan.
o

The SVM below must not to be entered during the replacement test plan.

•

Follow the on-screen prompts but DO NOT replace the control unit.

•

After the replacement test plan for diagnostic address 00D6 has been completed, select “SVM – Code Input”.

•

Enter SVM code 94CBA216 and follow the on-screen prompts.

•

When exiting GFF, ensure the diagnostic log is sent to GFF Paperless.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 5 of 7

Release Date

Technical Service Bulletin

04/17/2024

94CB UPDATE
Software Update for Light Control Module – (NVLW)

Warranty
Claim Entry Instructions
After Update has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work or vehicle is out of the specified warranty parameter for this Update:


U.S. dealers: Submit the request through Audi Warranty Online under the Campaigns/Update option.



Canada dealers: Upload the repair order to Audi WIN/Operations/Campaign Closure.
Service Number

94CB

Damage Code

0099

Parts Vendor Code
Claim Type

002
Sold vehicle: 7 10
Unsold vehicle: 7 90

Causal Indicator
Vehicle Wash/Loaner
Criteria I.D.

Mark labor as causal
Do not claim wash/loaner under this action
01
LABOR
Labor Op

Time Units

0150 00 10

SEE ELSA

0150 00 60

Time stated on
diagnostic protocol

Description
GFF/Guided Functions
(connect battery charger + setup)
GFF/Guided Functions
(replacement test plan and SVM update)

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 6 of 7

Release Date

04/17/2024

Technical Service Bulletin

94CB UPDATE
Software Update for Light Control Module – (NVLW)
Additional Actions Some of the affected vehicles may be involved in additional Actions. Please check your
Elsa Campaign/Action Information screen so that any additional required work can be
done simultaneously.
Verifying Vehicle
Eligibility

To verify vehicle eligibility for this Update, always check the Elsa Campaign/Action
Information screen. The Elsa system is the only binding inquiry and verification system;
other systems are not valid and may result in non-payment of a claim.

Help for Claim
Entry

For questions regarding claim entry, contact Audi Warranty.

Required
Customer
Notification

Inform your customer in writing by recording on the Repair Order any and all work that
was conducted on the vehicle, including any and all updates completed under this Update.

Required Special Tools

Battery Tester/Charger
capable of minimum 90
Amp continuous supply

Diagnostic Tester
-VAS6150X/VAS6160X(or equivalent)

Additional Information
All parts and service references provided in this Update are subject to change and/or removal. Always check Elsa
for the most current version of this document.

The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2024 Audi of America, Inc and Audi Canada All Rights Reserved.
94CB Page 7 of 7