Technical Service Bulletin
96 ACC: deviations in configuration of the radar sensor J428 (TPI 2073745)
96 24 98 2073970/1 May 24, 2024.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

Q3

2024 - 2025

All

Not Applicable

Condition
Workshop findings:
• An ODIS test plan referred to this TSB (TSB 2073970 / TPI 2073745).

It is only permitted to perform this TSB if Guided Fault Finding instructed you to refer to this TPI
number or if you were requested to do so by technical assistance.

Technical Background
Incorrect adaptation/parameter settings written during vehicle production.

Production Solution
Not applicable.

Service
Verify that the correct adaption / parameter values are written in the Adaptive Cruise Control -J428- (address
word 0013).
The versions of the four data sets, ID 7200, 7201, 7202 and 7203, must be read using self-diagnosis:
1. Select 0013 – Adaptive Cruise Control.
2. Select Control module OBD: Identification.
3. Click the button next to “Identification”.

© 2024 Audi of America, Inc.
Internal

Page 1 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin

Figure 1: Steps 1 - 3.
4.

Select “Show expanded identification”

Figure 2: Step 4.
© 2024 Audi of America, Inc.
Internal

Page 2 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
5. Enter “data” in the Filter textbox.
6. Expand “Identification of data sets” as well as “
[LO]_VW_Application_data_set_identificaion” by clicking on the downward caret.

Figure 3: Step 5 - 6.
7. For each Data record, expand by clicking on the caret, then note the data set ID and the
data set version for later reference.

© 2024 Audi of America, Inc.
Internal

Page 3 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin

Figure 4: Step 7
8. Open the PR number list of the vehicle. This can be done by clicking on “info”, then
select the PR no tab.

Figure 5: Step 8
© 2024 Audi of America, Inc.
Internal

Page 4 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
9.

Compare the versions with the data in the following tables:

Data set ID 7200 (vehicle geometric data set):
There are three possible data sets. These are differentiated by the PR numbers for the body type (PR family
KAR) and the type approval countries (PR family TPL):

KAR + TPL

PR numbers

Data set version

Q3 + rest of world (except USA and Canada)

+K4H but not +B35/BU2

V603

Q3 + NAR (USA/Canada)

+K4H+B35/BU2

V606

Q3 Sportback

+K5A

V402

Data set ID 7201 (AWV data set):
There are three possible data sets. These are differentiated by the PR numbers for the pedestrian/cyclist
protection system (PR family: FGS) and the lane departure warning/traffic jam assist (PR family: SRH):

FGS + SRH

PR numbers

Pedestrian protection system with cyclist protection and without lane
departure warning or with lane departure warning
Pedestrian protection system with cyclist protection and lane departure
warning plus traffic jam assist or emergency assist
Standard, advanced or predictive pedestrian protection system

Data set
version

+VL6+6I0/6I3 S501

+VL6+6I2/6I6 S502
+VL0/VL3

S507

Data set ID 7202 (ACC data set):
Only one data set is available for this identifier:

Vehicle (AED)

PR numbers

Data set version

AU326

+1TS

WB80

© 2024 Audi of America, Inc.
Internal

Page 5 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Data set ID 7203 (second ACC data set):
Only one data set is available for this identifier:

Vehicle (AED)

PR numbers

Data set version

AU326

+1TS

A506

If the data set version and the data set name do not match the values in the table, switch the ignition
off and on again and clear all DTCs of the vehicle. Then perform the GFF test plan “Replace control
module” under 0013 – Adaptive Cruise Control.

If the data set version and the data set name match the values in the table, switch the ignition off and
on again, then recheck the vehicle’s DTCs.

Warranty
Claim Type:

• 110 Up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside of any warranty, this Technical Service Bulletin is
informational only.

Service Number:

9163

Damage Code:

0039

Diagnostic Time:

GFF

0150 0060

Time stated on
the diagnostic
protocol

© 2024 Audi of America, Inc.
Internal

Page 6 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
(Max 50 TU)
GFF

0150 0010

See SRT with
associated
operations

Claim Comment:

Road test prior to the service procedure

No allowance

0 TU

Road test after the service procedure

No allowance

0 TU

As per TSB 2073970/1

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and

Procedures Manual. Claims are subject to review or audit by Audi Warranty.

Additional Information
All part and service references provided in this TSB (2073970) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check
the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.

© 2024 Audi of America, Inc.
Internal

Page 7 of 7

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.