NHTSA ID Number: 11002155
Manufacturer Communication Number: A9024932063502_8
TSB/Document Date: 2024-06-25
Summary
This bulletin provides information when various driver assist systesms malfunction; DTC B200FF9.
Technical Service Bulletin
90 Driver assist systems various malfunctions (Intersection/side assist, ACC inop when towing, etc.), DTC
B200FF9
90 24 93 2063502/8 May 22, 2024. Supersedes Technical Service Bulletin Group 90 number 23-34 dated August
2, 2023 for reasons listed below.
Model(s)
Year
e-tron Sportback
2020 - 2021
A6, A6 allroad,
S6, A7, S7, A8,
A8 e quattro, S8,
Q7, SQ7, Q8,
SQ8, and RS Q8
2020
e-tron
2021
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
9
-
Revised header (updated software filter)
Revised Condition (removed note about B200FF9)
Revised Service (updated to new update TSB layout)
Revised Warranty (updated labor ops)
8
08/02/2023
Revised header (removed certain models and vin filters)
7
01/26/2023
Revised Title (corrected Service Number Group)
Customer states:
Lane change assist/Intersection assist:
• The lane change assist/intersection assist is sporadically not working. One of the following messages is
displayed in the instrument cluster:
• “Intersection assist: fault. Please contact service.”
• “Side assist and exit warning system: fault. Please contact service.”
• “Rear cross-traffic assist: fault. Please contact service.”
• “Audi
pre sense: fault. Please contact service.”
Traffic sign recognition
• The traffic sign based speed limit settings are not permanently stored and are lost with every ignition cycle.
Adaptive Cruise Assist (ACA)
© 2024 Audi of America, Inc.
Internal
Page 1 of 6
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
• Vehicles with steel suspension: ACA disengages/loses calibration when towing a trailer/bike rack.
Workshop findings:
Lane change assist/Intersection assist:
The following DTC may be entered in the front corner radar control modules, J1088/J1089 (address words
00DB/00DC):
• DTC B200FF9 (Internal malfunction) with symptom code 1311089.
And/or
The following DTC may be entered in the lane change assist control modules J769/J770 (address words
003C/00CF):
• DTC B200FF9 (Internal Malfunction) with one of the following symptoms codes 1311057, 1311058, 1311059,
and/ or 1311060.
Other
• Other customer concerns (see above) may not enter a DTC in the vehicle.
Technical Background
Multiple driver assist features have been optimized. This update will affect the following control modules:
• Driver assist systems control module, J1121 (address word 00A5).
• Adaptive cruise control module, J428 (address word 0013).
• Lane change assist control module, J769/J770 (address words 003C/00CF).
• Front left/front right radar sensor control module for object detection, J1088/J1089 (address words
00DB/00DC).
• Control module for laser distance control, J1122 (address word 00CD).
• Airbag control module, J234 (address word 0015).
Production Solution
New software in production.
Service
For MY 2021 vehicles:
Perform repair as per TSB 2069244.
For MY 2020 e-tron quattro vehicles:
Required equipment:
• ODIS Tester.
© 2024 Audi of America, Inc.
Internal
Page 2 of 6
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
• SVM code.
• Software update package on an SD card if required (see Required Parts and Tools or download the software
from MirrorServer using the SD Creator Program.
Time to complete update:
• Approximately 60-120 minutes (includes 50 - 110 minutes for the software update, and 10 minutes for SVM
work).
Service Work:
All outstanding campaigns must have been completed prior to running this update. Please familiarize
yourself with all steps of this update before proceeding.
• If any warning messages are displayed in the instrument cluster, those have to be addressed prior to
updating the vehicle as running the update with active instrument cluster warning messages may
brick the driver assist control module, J1211 (address word 00A5).
1. Determine the driver assist systems control modules (zFAS), J1121 (address word 00A5) system
designation via ODIS (Figure 1):
© 2024 Audi of America, Inc.
Internal
Page 3 of 6
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi
of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Figure 1. zFAS system designation.
2. Select which SD Cards are required according to the system designation read in the prior step:
A. zFAS Var A: No SD Card is required.
B. MY20 Audi e-tron quattro and Audi e-tron Sportback: zFAX Var B/C: SD Card P/N:
4N0906961AR is required.
3.
Federal law requires the airbag’s Event Data Recorder (EDR) to be backed up prior to
running the update in this TSB.
• Please have the customer sign the declaration of consent available in the attachments
of this TSB, and upload a picture/scan to DOC-IT.
• In ODIS, run the test program ”J234 - Technical Service Bulletin (TSB) 2061023 via
“Choose self-test” >> 0015 - Airbag - J234 >> 0015 - Technical Service Bulletin (TSB).”
• Make sure that the diagnostic session that includes the results from the
aforementioned test plan is uploaded to GFF Paperless.
4. Update the peripheral control modules using SVM code FASISKD5A001 (this update should take
between 20 and 30 minutes.
Customer information:
• This update includes multiple control modules. Certain customer personalization
settings may be reset to factory settings by this update.
• The dealership/workshop, Audi of America, and/or Audi
AG are not liable for thirdparty modifications, like undocumented retro fits, non-genuine accessories, or any
other modification not approved b y Audi of America that might be rendered
inoperable by this update.
5. Exit the flash context in ODIS. Otherwise, it will not be possible to execute the following steps.
6.
Tip: zFAS Var A does not require and SD Card. However the update step in point 7 must
still be performed.
• If the vehicle has zFAS Var B/C installed, please insert the SD Card 4N0906961AR into the
SD Card reader. Please refer to TSB 2056558: 91 MIB2+ Software Update Instructions for
further information
7. Update the zFAS application software using SVM Code FASISKD5A002 (this update should take
about 30 minutes).
© 2024 Audi of America, Inc.
Internal
Page 4 of 6
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Always start the update out of ODIS. Please do not perform the update via the red
engineering menu (method 2) unless you have been given prior approval from TAC.
Vehicle
SD Creator Part
number
SVM Code
1
MY20 Audi e-tron quattro, Audi e-tron
Sportback quattro
---
FASISKD5A001
4N0906961AR (zFAS
B/C)
FASISKD5A002
2
8. Let the vehicle perform a bus sleep cycle:
• Exit the flash context.
• Switch the vehicle ignition off.
• Remove the battery charger and diagnostic interface dongle from the vehicle.
• Close the hood, trunk, and all doors, then lock the vehicle.
• Wait approximately six minutes without handling the vehicle.
Warranty
Claim Type:
• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside any warranty, this Technical Service Bulletin is
informational only.
Service Number:
Claims regarding DTC B200FF9
9635
Claims regarding Traffic Sign
Recognition
9093
Claims regarding ACC misadjustment
when towing
9163
Damage Code:
0039
Labor Operations:
Software Update (Includes checking for
DTCs)
0151 0000
Time stated on the
diagnostic protocol
(Max 200 TU)
© 2024 Audi of America, Inc.
Internal
Page 5 of 6
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Service Bulletin
Diagnostic Time:
Claim Comment:
Check and adjust driver assist systems
control unit
9093 0599
Charge Battery
2706 8950
See SRT with
associated
operations
GFF
No allowance
0 TU
Road test prior to the service procedure
No allowance
0 TU
Road test after the service procedure
0121 0004
10 TU
10 TU
As per TSB 2063502/8
All warranty claims submitted for payment must be in accordance with the Audi
Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Model
SD Card
Quantity
MY20 Audi e-tron quattro, Audi e-tron sportback quattro
4N0906961AR (zFAS B/C)
01 (Shop tool)
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732, 00 Software Version Management (SVM), operating instructions.
• TSB 2056558, 91 MIB2+ Software Update Instructions.
• TSB 2047812, 00 SD Creator: how to set up and use the SD Creator for obtaining vehicle software updates via
the MirrorServer.
• TSB 2062601, 90 DTC U110100 is stored in the driver assistance systems control module.
All part and service references provided in this TSB (2063502) are subject to change and/or removal. Always
check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the
Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi
of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.
© 2024 Audi of America, Inc.
Internal
Page 6 of 6
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: A9024932063502_8
Replacement Service Bulletin Number:
MFR Communication Date: 2024-05-22
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission
) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities. - 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




