Loading...

NHTSA ID Number: 11002143

Manufacturer Communication Number: A7024902064546_7

TSB/Document Date: 2024-06-25


Summary

This bulletin provides information regarding noises from door trim panels.


Technical Service Bulletin
70 Noises from door trim panel(s)
70 24 90 2064546/7 May 14, 2024. Supersedes Technical Service Bulletin Group 70 number 23-84 dated June
29, 2023 for reasons listed below.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

e-tron GT, and
RS e-tron GT

2022 - 2024

All

Not Applicable

Condition
REVISION HISTORY
Revision

Date

Purpose

7

-

Revised header (Add MY24)
Revised Production Solution (Remove production solution)
Revised Required Parts and Tools (Modify parts)

6

06/29/2023

Revised Warranty (Add Labor Operations)

5

05/12/2023

Revised Production Solution (Add Solution)
Revised Warranty (Add Labor Operations)

Customer states:
• Squeak or rattle noises from the door trim panel(s) during music operation or driving on rough roads.
Workshop findings:
One or more of the following areas have been identified as root causes:
• Midrange speaker trim.
• Upper door trim panel mounting strip.
Trim panel clips and body mounting points.
• Pull handle to armrest joint.
• Door wire harness and/or part labels.
• Rear and lower edges of door trim panel.
• Door trim panel light assembly.
• Power rear lid switch.
• Door trim panel storage pocket light assembly.

Technical Background
© 2024 Audi of America, Inc.
Internal

Page 1 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Relative movement between components due to tolerances.

Production Solution
Not applicable.

Service
Tip: There are several different possible root causes for the squeak and rattle noises originating from
the door trim panel(s). Check if the following corrective measures apply and only perform the
measure(s) relevant to the door trim panel in question.
The following materials are needed for repair:
• 533867910A (Felt strip/tape)
• D373125A2 (Fleece adhesive tape)
• G052172A1 (Special lubricant)

Midrange speaker trim:
• Remove the midrange speaker trim. Using felt tape (533867910A), apply a section to the lower
part of the opening for the trim in the door panel.
• Ensure that this section of felt will not be visible when the speaker trim is reinstalled (Figure 1).
All of the tabs on the speaker trim that engage the opening in the door panel will need to have felt
tape applied to each of them (Figure 2).

Figure 1. Felt strip section applied to opening
in door panel.

© 2024 AudieBay logo of America, Inc.
Internal

Figure 2. All tabs on the midrange speaker trim that
require felt tape.

Page 2 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Upper door trim panel mounting strip:
• Bond fleece tape (D373125A2) into mounting strip. To do so, position fleece tape at edge
of fastening strip and fold it over towards inside. Then press it on across entire surface
(Figures 3-5).

Figure 3. Apply fleece tape to the trim panel
mounting strip.

Figure 4. Fleece tape applied to mounting
strip.

Figure 5. Fleece tape bonded to mounting
strip.

Trim panel clips and body mounting points:
• Apply fleece tape (D373125A2) to door trim panel clips and to body mounting points to
reduce play (Figures 6-7).

© 2024 Audi of America, Inc.
Internal

Page 3 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of AudieBay logo of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin

Figure 6. Door clip with fleece tape
applied.

Figure 7. Door mounting point with fleece tape
applied.

Pull handle to armrest joint:
• Isolate the door trim panel pull handle from the armrest by applying fleece tape
(D373125A2) or special lubricant (G052172A1) in the areas of contact (Figures 8-9).

Figure 8. Isolate pull handle from
armrest.

Figure 9. Apply fleece tape or special lubricant to
isolate pull handle from armrest.

Door wire harness and/or part labels:
• Secure the door wire harness and/or part labels by repositioning them and/or applying
fleece tape (D373125A2) (Figures 10-13).

© 2024 Audi of America, Inc.
Internal

Page 4 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of AudieBay logo of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin

Figure 10. Repositioned part label.

Figure 11. Wire harness contacting door trim
panel.

Figure 12. Wire harness not secured
properly.

Figure 13. Wire harness contacting body.

Rear and lower edges of door trim panel:
• Apply felt tape (533867910A) to edge of door trim panel or on the existing piping strip in
area of close contact. (Figures 14-15).

Figure 14: Apply felt tape to edge of trim
panel.
© 2024 Audi of America, Inc.
Internal

Figure 15. Felt tape installed on trim panel.

Page 5 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Door trim panel light assembly:
Wrap cable for door trim panel light assembly with fleece tape (D373125A2) as far as to the
connector. Also apply fleece tape to light assembly to reduce play in mounting (Figures 1618).

Figure 16. Apply fleece tape to trim panel
light and wiring.

Figure 17. Wrapping light wire harness with fleece
tape.

Figure 18. Fleece tape applied to light
assembly.

Power rear lid switch:
• Carefully bend open retaining tab of power rear lid switch for a more secure fit (Figures 1920).

© 2024 Audi of America, Inc.
Internal

Page 6 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin

Figure 19. Bend retaining tab of power rear lid Figure 20. Bend open retaining tab of lid
switch.
switch.

Door trim panel storage pocket light assembly:
• Apply fleece tape (D373125A2) to the retaining tabs of the diffuser of the door pocket
lighting (Figures 21-22).

Figure 21. Apply fleece tape to pocket lighting. Figure 22. Fleece tape applied to diffuser
tabs.

Warranty
Claim Type:

• 110 up to 6 Months/6,000 Miles.
• 1 AM over 6 Months/6,000 Miles.
• If the vehicle is outside any warranty, this Technical Service Bulletin is
informational only.

Service Number:

7059

Damage Code:

0020

© 2024 Audi of America, Inc.
Internal

Page 7 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Labor Operations: Modify midrange speaker trim – One side

7014 4999

20 TU

7014 5099

30 TU

Modify front door trim panel – One side

7059 4999

60 TU

Modify front door trim panel – Two sides

7059 5099

110 TU

Modify pull handle – One side

7063 4999

30 TU

Modify pull handle – Both sides

7063 5099

50 TU

Modify rear door trim panel – One side

7073 4999

50 TU

Modify rear door trim panel – Two sides

7073 5099

80 TU

GFF

No allowance

0 TU

Road test prior to the service procedure

0121 0002

10 TU

Road test after the service procedure

0121 0004

10 TU

Modify midrange speaker trim – Both sides
And/Or

And/Or

And/Or

Diagnostic Time:

Claim Comment: As per TSB 2064546/7
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by AudieBay logo Warranty.

Required Parts and Tools
Always check with your Parts Department and/or ETKA for the latest information and parts bulletins.
Part Number Part Description

© 2024 Audi of America, Inc.
Internal

Quantity

Page 8 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
533867910A

1 or 2

Self-adhesive felt strip
D 373125A2

0.1 or 0.2

Fleece adhesive tape

© 2024 AudieBay logo of America, Inc.
Internal

Page 9 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
G 052172A1

Shop Supply

Special lubricant
See ETKA

Fasteners, Bolts, Nuts, and Screws as needed per the Repair Manual

See ETKA/ELSA

Additional Information
All parts and service references provided in this TSB (2064546) are subject to change and/or removal.
©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.

© 2024 Audi of America, Inc.
Internal

Page 10 of 10

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

1

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
Bestseller No. 2
Autel Scanner MaxiCheck MX808S, 2026 Bidirectional OBD2 Scan Tool US Ver. of MaxiCOM MK808S MK808Z, 3000+ Active Test 11OS as MK900 MK900BT MX900, 28+ Service for 200+ Brands, OE All Diagnostic, FCA
  • 📌【We are Here for You】Dear valued customer, please be...
  • 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
  • 🔥【3000+ Active Tests = MK900/MK900BT but...
  • 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
  • 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...

If the PDF is very large, it may not load in the preview below.

Download PDF [669.72 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: A7024902064546_7

Replacement Service Bulletin Number:

MFR Communication Date: 2024-05-14

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: STRUCTURE:BODY

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU Coding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...