Technical Service Bulletin
01 MIL on; cylinder misfires (DTCs P0300, P0301, P0302, P0303, P0304, P0305, P0306)
01 24 21 2069038/6 May 14, 2024. Supersedes Technical Service Bulletin Group 01 number 23-91 dated
November 1, 2023 for reasons listed below.
Model(s)

Year

A6, A7, and Q8

2019 - 2021

A6 allroad, S6,
and S7

2020 - 2021

RS 6 Avant, A7 e
quattro, and RS
7

2021

VIN Range

Vehicle-Specific Equipment

All

Not Applicable

Condition
REVISION HISTORY
Revision

Date

Purpose

6

-

Revised Warranty (Updated Labor Operations)

5

11/01/2023

Revised header (Updated Models)
Revised Warranty (Updated claim types)

4

10/02/2023

Revised header (Updated Models)
Revised Warranty (Updated claim types)

Customer states:
MIL is illuminated.
Workshop findings:
The following DTCs may be stored:
• DTC P0300: Random/Multiple Cylinder Misfire Detected
• DTC P0301: Cyl.1 Misfire Detected
• DTC P0302: Cyl.2 Misfire Detected
• DTC P0303: Cyl.3 Misfire Detected
• DTC P0304: Cyl.4 Misfire Detected
• DTC P0305: Cyl.5 Misfire Detected
• DTC P0306: Cyl.6 Misfire Detected

Technical Background
© 2024 Audi of America, Inc.
Internal

Page 1 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
The software needs to be updated. The optimized software will correct the misfire and prevent the MIL from
illuminating.

Production Solution
New software in the control module, -J623- (address word 0001) addressed the condition.

Service
This TSB replaces Pending Service Solutions (PSS):
TSB 2054182: PSS 01 3.0 TFSI Bank 2 engine misfires – Q8/Q7 (DCBD engine).
TSB 2058038: PSS 01 3.0 TFSI engine misfires – A6 and A7 – DTCs P0300 through P0306
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the ECM, J623 (address word 0001) using the SVM action code as listed in the table below, if
necessary:
Model

Old Software
Part Number

Old Software
Version

New Software
Part Number

New Software
Version

(or higher)

(or higher)

MY 19 A6/A7

4K0907559A

0007

4K0907559A

0008

MY 20 A6/A7

4K0907559D

0002

4K0907559D

0003

MY 21 A6/A7

4K0907559K

0001- 0002

4K0907559K

0004

MY 20 Q7

4M0907559D

0001- 0003

4M0907559D

0004

MY 21 Q7

4M0907559L

0001- 0002

4M0907559L

0003

MY 21 Q8

4M8907559M

0001-0002

4M8907559M

0003

MY 19-20 Q8

4M8907559A

0001- 0003

4M8907559A

0004

SVM Code
Input

01A255

Warranty
Claim Type:

• 110 up to 48 Months/50,000 Miles.
• G10 for CPO Covered Vehicles – Verify Owner.
• If the vehicle is outside any warranty, this Technical Service Bulletin is
informational only.

© 2024 Audi of America, Inc.
Internal

Page 2 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.

Technical Service Bulletin
Service Number:

2470

Damage Code:

0039

Labor Operations:

Software Update

0151 0010

See SRT with
associated
operations

Diagnostic Time:

Software update

0151 0060

Time stated on the
diagnostic protocol
(Max 50 TU)

Claim Comment:

Road test prior to the service procedure

No allowance

0 TU

Road test after the service procedure

No allowance

0 TU

As per TSB 2069038/6

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.

Required Parts and Tools
Tool Number

Tool Description

VAS 6160/VAS 6150

VAS tester with the current version of ODIS (Windows 10).

Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
• TSB 2011732: 00 Software Version Management (SVM), operating instructions.
All part and service references provided in this TSB (2069038) are subject to change and/or removal.
©2024 Audi of America, Inc. All rights reserved. The information contained in this document is based on the
latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes
at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites without the prior expressed written permission of the
publisher.

© 2024 Audi of America, Inc.
Internal

Page 3 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.