NHTSA ID Number: 11001931
Manufacturer Communication Number: fsd-12-4_0524.pdf
TSB/Document Date: 2024-06-20
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
obstacles (people and objects).
To open the liftgaterear trunk from inside the vehicle in the unlikely situation that CybertruckModel SModel XModel 3Model Y
has no power, see Interior Emergency Trunk Release on page 178.
If Model X detects a low ceiling (for example, in a garage), it opens the liftgaterear trunk (and falcon wing doors) to a lower
height, even if no obstacle is detected. You can override this height by manually lifting it higher. When doing so, the
touchscreen prompts you to choose if you always want the trunk to open to this higher position at this location, and saves your
choice. If you choose to do so, the next time you open the liftgaterear trunk at this location, Model X opens it to the saved
height.
WARNING: Before opening or closing the liftgaterear trunk, check the surrounding area (for people and objects).
Although the liftgaterear trunk can detect obstacles, it cannot detect all objects at all times. Do not rely on the liftgate to
sense an obstruction when opening or closing. You must proactively monitor the liftgate to ensure that it does not come
into contact with a person or object. Failure to do so may result in damage or injury.
A low voltage power socket is located on the left side of the rear trunk.
Adjusting Liftgate Opening Height
If CybertruckModel SModel XModel 3Model Y is equipped with a liftgaterear trunk, you can adjust its opening height to make
it easier to reach or to avoid low-hanging ceilings or objects (for example, a garage door or light):
You can adjust the opening height of the liftgaterear trunk to make it easier to reach or to avoid low-hanging ceilings or
objects (for example, a garage door or light):
1. Open the trunk, then manually lower or raise the liftgaterear trunk to the desired opening height.
2. Press and hold the button on the underside of the liftgaterear trunk for three seconds until you hear a confirmation chime.
Owner's Manual
171
Owners Manual
172
Owner's Manual
Owners Manual
3. Confirm that you have set it to the desired height by closing the liftgaterear trunk, then reopening it.
CAUTION: Depending on configuration (such as suspension height or wheel selection), your vehicle's liftgate can open
up to approximately 7.5 feet (2.3 meters)8 feet (2.5 meters)7.5 feet (2.3 meters) high. Adjust the liftgate height to
prevent it from coming into contact with low ceilings or other objects.
Adjusting Opening Height of Powered Trunk
You can adjust the opening height of the powered trunk to make it easier to reach or to avoid low-hanging ceilings or objects
(for example, a garage door or light):
1. Open the trunk, then manually lower or raise it to the desired opening height.
2. Press and hold the button on the underside of the trunk for three seconds until you hear a confirmation chime.
Owner's Manual
173
Owners Manual
3. Confirm that you have set it to the desired height by closing the powered trunk, then reopening it.
CAUTION: Depending on configuration (such as wheel selection), your vehicle's rear trunk can open up to approximately
6.5 feet (2 meters). Adjust the rear trunk height to prevent it from coming into contact with low ceilings or other objects.
Closing
If Model S is not equipped with a liftgaterear trunk, close the rear trunk by pulling down on the liftgate and pushing firmly until
it is fully closed.
To close the liftgaterear trunk, do one of the following:
• Touch Controls > Trunk.
• Touch the associated Close button on the touchscreen.
• Touch the associated Close button on the touchscreen.
• Double-click the rear trunk button on the key fob.
• Double-click the rear trunk button on the key fob.
• Press the switch located on the underside of the liftgaterear trunk
If the liftgaterear trunk senses an obstruction when closing, it stops moving and chimes two times. Remove the obstruction
and try closing it again.
If the liftgaterear trunk loses its calibration when opened, the liftgate chimes three times and does not move. To restore
calibration, manually pull the liftgate down to close it.
To close the trunk, push it downward until you hear the latch click into place. Model 3 is equipped with pull cups to assist with
lowering the rear trunk.
174
Owner's Manual
Owners Manual
To close the powered trunk, do one of the following:
• Touch the associated Close button on the touchscreen.
• Press the switch located by the rear trunk's exterior handle.
• Double-click the rear trunk button on the key fob.
If the powered trunk senses an obstruction when closing, it stops moving and sounds two chimes. Remove the obstruction and
try closing it again.
WARNING: Before driving, ensure that the trunk is securely latched in the fully-closed position by lifting up on the
bottom edge and confirming there is no movement.
Interior Release
To open the rear trunk from inside a Model S equipped with the Tesla Built-In Rear Facing Child Seats, press the interior
release switch located inside the rear trunk and push the liftgate up. If Model S is locked and is equipped with a liftgate, the
first press unlocks the rear trunk and the second press opens it.
NOTE: If Model S is not equipped with the Tesla Rear Facing Child Seats, the switch may appear to exist, but it is inactive and
pressing it does not release the liftgate.
If Model S is equipped with the power liftgate, you do not need to push it up. When you press the release switch, it opens, and
when you pull the switch, it closes.
NOTE: The interior release switch is disabled if child-protection locks are turned on (see Child-Protection Lock on page 157),
or if CybertruckModel SModel XModel 3Model Y is moving.
Owner's Manual
175
Owners Manual
Parcel Shelf (if equipped)
The parcel shelf covers the rear cargo and is useful when you want to conceal valuables, keep the sun away from groceries, or
minimize noise from rustling objects. To fold the shelf in, hold the circular panel and slide the shelf back toward the rear seat.
Fold the circular panel on top of the folded parcel shelf. To unfold, flip over the circular panel and slide the shelf toward you
until it straightens out.
To remove, fold the back panel and lift the parcel shelf upward with your hand underneath the bottom of the shelf to disengage
the tabs and magnets in the front corners. Then slide the parcel shelf out.
CAUTION: Do not place heavy objects on top of the parcel shelf.
Accessing the Cargo Area
To access the cargo area inside the rear trunk, pull up the strap at the rear of the cargo cover. You can then fold the cargo
cover forward or remove it from CybertruckModel SModel XModel 3Model Y.
Secure all cargo before moving CybertruckModel SModel XModel 3Model Y, and place heavy cargo in the lowerupper trunk
compartment.
176
Owner's Manual
Owners Manual
To access the cargo area inside the rear trunk, push down on the ridged portion of the handle of the cargo cover and then pull
up. You can then adjust the position of the cargo cover or completely remove it.
Owner's Manual
177
Owners Manual
Rear Trunk Load Limits
Distribute the weight of cargo as evenly as possible between the front and rear trunks.
CAUTION: Never load more than 176 lbs (80 kg)in the upper compartment of the rear trunk or more than 285 lbs (130
kg) in the lower compartment. Doing so can cause damage.
CAUTION: Never load more than 88 lbs (40 kg) in the lower compartment of the rear trunk or more than 287 lbs (130 kg)
on the upper compartment. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's Gross Vehicle Weight Rating (GVWR) (see Specifications
on page 831). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo.
Interior Emergency Trunk Release
An illuminated mechanical release located inside the rear trunk allows you to open the rear trunk from the inside if
CybertruckModel SModel XModel 3Model Y has no electrical power. This mechanical release also allows a person locked
inside to get out.
178
Owner's Manual
Owners Manual
1. Remove the cover by pulling its lower edge very firmly toward you.
2. Pull the cable to release the latch.
3. Push the rear trunk open.
1. Firmly press and hold the illuminated button in the direction of the arrow to release the latch.
2. While pressing the button, push the rear trunk open.
Owner's Manual
179
Owners Manual
NOTE: The button glows for several hours after a brief exposure to ambient light.
WARNING: Do not allow children to play inside the trunk or become locked inside. An unrestrained child could suffer
serious injury or death in a crash. A child could suffer heat exhaustion or death if trapped in the vehicle, especially
without climate control on. If your CybertruckModel SModel XModel 3Model Y is equipped with Tesla built-in rear
facing child seats, see Tesla Built-In Rear Facing Child Seats on page 314 and ensure all restrictions, instructions, and
warnings are followed.
180
Owner's Manual
Owners Manual
Front Trunk
Opening
To open the front trunk, ensure CybertruckModel SModel XModel 3Model Y is in Park, and then do one of the following before
pulling the hood open:
• Touch Controls > Front Trunk on the touchscreen.
• Touch Controls > Frunk on the touchscreen.
• Touch the associated Open icon on the touchscreen.
• Double-click the front trunk button on the key fob.
• Touch the front trunk button in the mobile app.
Owner's Manual
181
Owners Manual
182
Owner's Manual
Owners Manual
The instrument panel displays when a door, trunk, or liftgate is open.
When a door or trunk/liftgate is open, the instrument panel displays the Door Open indicator light. The image of
your CybertruckModel SModel XModel 3Model Y on the touchscreen also displays the open front trunk.
When a door or trunk is open, the touchscreen displays the Door Open indicator light. The image of your
CybertruckModel SModel XModel 3Model Y on the touchscreen also displays the open front trunk.
When a door or trunk/liftgate is open, the touchscreen displays the Door Open indicator light. The image of
your CybertruckModel SModel XModel 3Model Y on the touchscreen also displays the open front trunk.
WARNING: Before opening or closing the hood, it is important to check that the area around the hood is free of
obstacles (people and objects). Failure to do so may result in damage or serious injury.
Closing
The CybertruckModel SModel XModel 3Model Y hood is not heavy enough to latch under its own weight and applying
pressure on the front edge or center of the hood can cause damage.
To properly close the hood:
1. Lower the hood until the striker touches the latches.
2. Place both hands on the front of the hood in the areas shown (in green), then press down firmly to engage the latches.
3. Carefully try to lift the front edge of the hood to ensure that it is fully closed.
Owner's Manual
183
Owners Manual
184
Owner's Manual
Owners Manual
Owner's Manual
185
Owners Manual
186
Owner's Manual
Owners Manual
Owner's Manual
187
Owners Manual
CAUTION: To prevent damage:
• Apply pressure only to the green areas shown. Applying pressure to the red areas can cause damage.
• Do not close the hood with one hand. Doing so applies concentrated force in one area and can result in a dent or
crease.
• Do not apply pressure to the front edge of the hood. Doing so can crease the edge.
• Do not slam or drop the hood.
• To avoid scratches, don't have anything in your hands (keys). Jewelry can also cause scratches.
WARNING: Before driving, you must ensure that the hood is securely latched in the fully closed position by carefully
trying to lift the front edge of the hood upward and confirming there is no movement. It is the driver's responsibility to
ensure that the front trunk is properly closed before driving.
If a falcon wing door or the front trunk is left open when you attempt to shift out of Park, a notification requiring you to confirm
your intent to drive appears on the touchscreen. The falcon wing doors may automatically close once you begin to accelerate.
In addition, your vehicle speed is limited if you choose to keep the front trunk open while driving.
If the front trunk is left open when you attempt to shift out of Park, a notification requiring you to confirm your intent to drive
appears on the touchscreen. If you choose to keep the front trunk open while driving, your vehicle speed is limited.
The front trunk locks when:
• You lock CybertruckModel SModel XModel 3Model Y using the touchscreen, key or mobile app.
• You leave CybertruckModel SModel XModel 3Model Y carrying your key (if Walk-Away Door Lock on page 157Walk-Away
Door Lock on page 143 is turned on).
• Valet mode is active (see Valet Mode on page 514).
Front Trunk Load Limit
Distribute the weight of cargo as evenly as possible between the front and rear trunks.
188
Owner's Manual
Owners Manual
CAUTION: Never load more than 110 lbs (50 kg) in the front trunk. Doing so can cause damage.
CAUTION: Never load more than 300 lbs (136 kg) in the front trunk. Doing so can cause damage.
WARNING: When loading cargo, always consider the vehicle's Gross Vehicle Weight Rating (GVWR) (see Specifications
on page 831). The GVWR is the maximum allowable total mass of the vehicle including all passengers, fluids, and cargo.
Interior Emergency Release
An illuminated interior release button inside the front trunk allows a person locked inside to get out.
Owner's Manual
189
Owners Manual
Press the interior release button to unlatch the front trunk, then push up on the hood.
NOTE: The interior release button glows following a brief exposure to ambient light.
WARNING: People should never climb inside the front trunk. Never shut the front trunk when a person is inside.
WARNING: Care should be taken to ensure that objects inside the front trunk do not bump against the release button,
causing the hood to accidentally open.
190
Owner's Manual
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 108), the center console
includes cup holders, two storage compartments, various chargers (see Interior Electronics on page 56), and a rear
touchscreen.
To open the main storage compartment, squeeze the latch under the front lip. Open the front storage compartment by sliding
its cover forward.
Owner's Manual
191
Owners Manual
CybertruckModel SModel XModel 3Model Y has two cupholders that slide out under the rear touchscreen.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row. This console
can serve as an arm rest for rear passengers.
To lower the console, press the button on the top back of the center seat. To raise the console, push it all the way upwards.
To access the storage tray and wireless phone charger (see Interior Electronics on page 56), raise the cover by pressing the
latch on the underside of it and pulling it up.
192
Owner's Manual
Owners Manual
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders or use it as an armrest.
NOTE: The rear console is self-locking in certain situations and cannot be lowered. For example, while driving on a steep slope
or during hard accelerations.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and the light turns on.
Owner's Manual
193
Owners Manual
To close the glovebox, push it upward until it latches into the closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 655).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 514). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle above the rear window in the
second row, next to the reading light. Push the coat hanger to release it. Push it again to retract it.
194
Owner's Manual
Owners Manual
Owner's Manual
195
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 108), the center console
includes cup holders, two storage compartments, various chargers (see Interior Electronics on page 56), and a rear
touchscreen.
To open the main storage compartment, squeeze the latch under the front lip. Open the front storage compartment by sliding
its cover forward.
196
Owner's Manual
Owners Manual
CybertruckModel SModel XModel 3Model Y has two cupholders that slide out under the rear touchscreen.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row. This console
can serve as an arm rest for rear passengers.
To lower the console, press the button on the top back of the center seat. To raise the console, push it all the way upwards.
To access the storage tray and wireless phone charger (see Interior Electronics on page 56), raise the cover by pressing the
latch on the underside of it and pulling it up.
Owner's Manual
197
Owners Manual
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders or use it as an armrest.
NOTE: The rear console is self-locking in certain situations and cannot be lowered. For example, while driving on a steep slope
or during hard accelerations.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and the light turns on.
198
Owner's Manual
Owners Manual
To close the glovebox, push it upward until it latches into the closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 655).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 514). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle above the rear window in the
second row, next to the reading light. Push the coat hanger to release it. Push it again to retract it.
Owner's Manual
199
Owners Manual
200
Owner's Manual
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 108), the center console
includes cup holders, two storage compartments, and a phone dock for two phones (or other devices) or a wireless phone
charger (depending on date of manufacture)a wireless phone charger (see Interior Electronics on page 40).
To open the main storage compartment, pull its cover upward. Open the other storage compartment or access the phone dock
by pressing firmly near the cover's opening edge. To close a storage compartment, push its cover down gently.
To open the main storage compartment, pull its cover upward. Open the front storage compartment by sliding its cover
forward.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders, or use it as an armrest.
Owner's Manual
201
Owners Manual
Third Row Cup Holders (7-seat models only)
If CybertruckModel SModel XModel 3Model Y is equipped with seven seats, two cup holders are located between the third
row seats.
202
Owner's Manual
Owners Manual
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row. Push the
coat hanger to release it. Push it again to retract it.
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row next to the
reading light. Push the coat hanger to release it. Push it again to retract it.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and its light turns on.
Owner's Manual
203
Owners Manual
204
Owner's Manual
Owners Manual
To close the glovebox, push it upward until it clicks into its closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 655).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 514). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Glovebox
To open the glovebox, press the switch located on the side of the touchscreen. The glovebox locks whenever
CybertruckModel SModel XModel 3Model Y is locked externally, using the key or walk-away locking. It also locks when
CybertruckModel SModel XModel 3Model Y is in Valet mode (see Valet Mode on page 514). It does not lock when you lock
CybertruckModel SModel XModel 3Model Y using the lock icon on the touchscreen's status bar.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 655).
Owner's Manual
205
Owners Manual
NOTE: If you leave the glovebox open, its light eventually turns off.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
206
Owner's Manual
Owners Manual
Cup Holders
To expose a front cup holder, slide back the armrest.
To expose rear cup holders (if equipped), press and release the cup holder face plate located at the back of the center
console.
Owner's Manual
207
Owners Manual
Interior Storage
Center Console
In addition to housing an RFID transmitter that reads key fobs and key cards (see Keys on page 108), the center console
includes cup holders, two storage compartments, and a phone dock for two phones (or other devices) or a wireless phone
charger (depending on date of manufacture)a wireless phone charger (see Interior Electronics on page 40).
To open the main storage compartment, pull its cover upward. Open the other storage compartment or access the phone dock
by pressing firmly near the cover's opening edge. To close a storage compartment, push its cover down gently.
To open the main storage compartment, pull its cover upward. Open the front storage compartment by sliding its cover
forward.
Rear Console
Your CybertruckModel SModel XModel 3Model Y has a rear console integrated in the center of the second row seat back. Pull
the console down to access the rear cup holders, or use it as an armrest.
208
Owner's Manual
Owners Manual
Third Row Cup Holders (7-seat models only)
If CybertruckModel SModel XModel 3Model Y is equipped with seven seats, two cup holders are located between the third
row seats.
Owner's Manual
209
Owners Manual
Coat Hangers
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row. Push the
coat hanger to release it. Push it again to retract it.
Your CybertruckModel SModel XModel 3Model Y has a coat hanger on each side of the vehicle in the second row next to the
reading light. Push the coat hanger to release it. Push it again to retract it.
Glovebox
To open the glovebox, touch Controls > Glovebox. The glovebox automatically opens and its light turns on.
210
Owner's Manual
Owners Manual
Owner's Manual
211
Owners Manual
To close the glovebox, push it upward until it clicks into its closed position.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 655).
NOTE: If you leave the glovebox open, its light eventually turns off.
NOTE: The glovebox locks whenever closed and you lock CybertruckModel SModel XModel 3Model Y using the mobile app,
key card, you leave CybertruckModel SModel XModel 3Model Y carrying your phone key (if Walk-Away Door Lock is turned
on), or if Valet mode is active (see Valet Mode on page 514). It does not lock when CybertruckModel SModel XModel 3Model
Y is locked by touching the lock icon on the touchscreen.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
Glovebox
To open the glovebox, press the switch located on the side of the touchscreen. The glovebox locks whenever
CybertruckModel SModel XModel 3Model Y is locked externally, using the key or walk-away locking. It also locks when
CybertruckModel SModel XModel 3Model Y is in Valet mode (see Valet Mode on page 514). It does not lock when you lock
CybertruckModel SModel XModel 3Model Y using the lock icon on the touchscreen's status bar.
For additional glovebox security, touch Controls > Safety > Glovebox PIN to set a 4-digit PIN (see Glovebox PIN on page 655).
212
Owner's Manual
Owners Manual
NOTE: If you leave the glovebox open, its light eventually turns off.
WARNING: When driving, keep the glovebox closed to prevent injury to a passenger if a collision or sudden stop occurs.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: fsd-12-4_0524.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-04-30
MFR Internal Campaign ID/Software Version: fsd-12-4
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.